RIDGID SeekTech SR-24 User manual

Original Instructions – English

Operator’s Manual

ST-33QR

SeekTech

Connecting with

2 – English

Table of Contents

System Overview

Description ��3

Bluetooth Specifications ��3

Range��4

Bluetooth Connection

Syncing the Devices ��4

Disconnecting the Devices ��5

Powering the Transmitter ��6

Transmitter Control Screen ��6

English – 3

System Overview

This document covers the basics of connecting the de-

vices and controlling the transmitter from the receiv-

er� Refer to the operator’s manuals for the RIDGID

SeekTech SR-24 and RIDGID SeekTech ST-33Q+ for

more information on each product’s individual specifica-

tions and operation�

Description

The RIDGID SeekTech SR-24 receiver and RIDGID

SeekTech ST-33Q+ transmitter are equipped with

Bluetooth® which allows the units to communicate with

one another during operation� With Bluetooth enabled on

both units, the SR-24 can be used to remotely monitor

the transmitter’s screen and control its operation during

a locate, eliminating the need to walk back and forth to

the transmitter to change settings�

Bluetooth Specifications

Type Class 1

Profile RFCOMM

Transmit power 19 dBm

Receiver sensitivity -92 dBm

Typical maximum

operating range*

100 m − 200 m

(328 ft − 656 ft)

*Effective distance may vary

4 – English

Bluetooth Connection

Connecting the Devices

To connect the devices, follow these steps:

1� Power on the receiver and press the Menu key �

2� Press the Down Arrow key to scroll through the

frequencies list� Highlight the Bluetooth icon and

press the Select key �

3� Press the Select key when the search icon

appears�

4� Press the Down Arrow key to highlight the trans-

mitter you want to connect to� Press the Select key

�

You can identify your transmitter by its name and the last

four digits of its serial number� The transmitter does not

need to be powered on to be discoverable�

Range

The ST-33Q+ and SR-24 work best when kept with-

in 200 m [656 ft] of each other while connected by

Bluetooth� The quality of the connection between devic-

es may be affected by a number of factors including dis-

tance between devices and objects in the path between

devices� For the best quality connection, maintain a clear

line of sight between devices and set the transmitter so

its battery faces the receiver� Objects blocking the line of

sight between the transmitter and the receiver may sig-

nificantly reduce the quality of their connection�

English – 5

Once a connection is made, the transmitter automatically

powers on� When connected, the Bluetooth icon is vis-

ible on both the transmitter’s and the receiver’s screens�

On the transmitter, a chain link image confirms that the

two units are connected�

If the receiver has been paired with multiple transmitters,

it automatically goes through the list and tries to connect

to each one until it is successful�

Note:The receiver can remember up to 16 devices it has

been paired with.For more information on connecting to

other devices, refer to the SR-24 manual.

Disconnecting the Devices

The two devices remain connected until manually discon-

nected� To disconnect the devices, follow these steps:

1� Make sure both the transmitter and receiver are

powered on� On the receiver, press the Menu key

�

2� Press the Down Arrow key to navigate to and

highlight the Bluetooth icon �

3� Press the Select key � The disconnect icon

displays when the devices have suc-

cessfully disconnected�

On the transmitter, an image of a broken chain link con-

firms that the two units are disconnected�

On the receiver, a warning alert displays�

6 – English

Powering the Transmitter

When the two units are connected with Bluetooth, pow-

ering the receiver on or off automatically powers the

transmitter on or off�

The receiver alerts you to changes in the transmitter’s

power status�

Switching to internal

batteries�

Powered off due to

Power key press�

Powered off due to

low battery�

Setting the Frequency

Changing the receiver’s frequency automatically updates

the transmitter’s frequency to match� If the frequency is

changed on the transmitter, the receiver automatically

updates to match as well�

Transmitter Control Screen

When the devices are connected, you can see the trans-

mitter’s screen from the receiver� The transmitter control

screen allows you to control the transmitter’s frequen-

cy mode, choose between direct connect or inductive

mode, and adjust output power remotely� You can also

remotely power the transmitter on or off and know if the

transmitter has powered off unexpectedly�

Any changes made on the transmitter to frequency, di-

rect connect or inductive mode, and output power can be

seen on the receiver�

To open the transmitter control screen on the receiver,

press the Menu key , then press the Right Arrow key

to toggle in and out of the transmitter’s control screen�

If more than one Bluetooth enabled SeekTech trans-

mitter is present, press the Left Arrow key to cycle

through available transmitters� Press the serial number

listed below the transmitter icon to identify the specific

transmitter you want to control�

English – 7

Direct Connect Mode and Inductive Mode

To remotely set the transmitter to direct connect mode

or inductive mode using the receiver, open the transmit-

ter control screen� Press the Select key to toggle be-

tween direct connect mode and inductive mode�

Clamp Mode

The receiver can see the transmitter’s clamp mode but

cannot turn the transmitter’s clamp mode on or off� An in-

ductive clampmust be connected to access clamp mode�

Refer to the operator’s manual for your transmitter and

inductive clamp for more information on using inductive

clamp mode�

Output Power

Higher output settings produce a stronger signal for the

receiver, but reduces battery life for the transmitter� Only

use 1,000 mA High Output Mode if using an 18V Lithi-

um-ion rechargeable battery, external power, or high ca-

pacity NiMH D cell batteries� Do not use the ST-33Q+ in

high output mode with standard alkaline batteries�

You can read the transmitter’s output power or change it

remotely from the receiver� To remotely change the trans-

mitter’s output power using the receiver, open the trans-

mitter control screen� Press the receiver’s Up and Down

Arrow keys to adjust the output power�

Printed in U.S. 10/29/2014

English (EN) Rev 11

Every effort has been made to ensure that the information in this manual is accurate� Ridge Tool Company and its affiliates

reserve the right to change the specifications of the hardware, software, or both as described in this manual without notice�

Visit www�RIDGID�com for current updates and supplemental information pertaining to this product� Due to product devel-

opment, the photos and other presentations specified in this manual may differ from the actual product�

RIDGID and the RIDGID logo are trademarks of Ridge Tool Company, registered in the U�S� and other countries� All other

registered and unregistered trademarks and logos mentioned herein are the property of their respective owners� Mention

of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation�

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc�

Ridge Tool Company

400 Clark Street

Elyria, Ohio 44035-6001

U.S.

1-800-474-3443

Ridge Tool Europe

Research Park Haasrode

3001 Leuven

Belgium

+ 32 (0)16 380 280

WWW.RIDGID.COM

Other manuals for SeekTech SR-24

This manual suits for next models

Table of contents

Popular Tools manuals by other brands

Martor

Martor SECUNORM 175 quick start guide

ERKCO

ERKCO 1000 user manual

jbc

jbc N4473 instruction manual

FEINMETALL

FEINMETALL FZWZ-SET-001 quick start guide

Worx Professional

Worx Professional Sonicrafter WU676 Original instructions

Gage Bilt

Gage Bilt GB713SH Original instructions

Hilti

Hilti DX 9-ENP Original operating instructions

norbar

norbar NORTRONIC 34399 Operator's manual

BGS technic

BGS technic 8578 manual

Makita

Makita DHR241 instruction manual

Motor Guard

Motor Guard JMB-1250 instructions

Power Adhesives

Power Adhesives 805-12 operating instructions

Clemco

Clemco 24189 quick start guide

VVG

VVG VNG 903 Series instruction manual

Hilti

Hilti FX 3-A operating instructions

Grizzly

Grizzly H6472 Manual insert

axing

axing BWZ 5-02 Operation instructions

Dh-Robotics

Dh-Robotics RGI-100 Short manual