RH TALLADO TRAVERTINE Programming manual

TALLADO TRAVERTINE RECTANGULAR TABLE LAMP

ASSEMBLY & INSTALLATION INSTRUCTIONS

ENGLISH

(B)

Fig. 1

Fig. 1

(A)

(B)

(C)

Knurled Ring (pre-installed)

Socket

Knurled Ring (pre-installed)

Spider Fitter

Socket

Plug

Fixture Power Cord

Lamp Base

Table Surface

Dimmer Switch

Lamp Body

Spider Fitter

TALLADO TRAVERTINE RECTANGULAR TABLE LAMP ENGLISH

RH.COM

REVISION 29-06-23

TALLADO TRAVERTINE RECTANGULAR TABLE LAMP

PARTS INCLUDED

(A) Lightbulb (1)

(B) Knurled Ring (1)

(C) Shade (1)

TALLADO TRAVERTINE RECTANGULAR TABLE LAMP ENGLISH

RH.COM

REVISION 29-06-23

IMPORTANT: PLEASE READ

IMPORTANT SAFETY FEATURES

BULBS

This lamp has been rated for one (1) 15-watt maximum LED lightbulb or

100-watt maximum incandescent Type A19 E26 lightbulb. To avoid the risk

of ﬁre, do not exceed the recommended wattage.

DIMMER SWITCH COMPATIBILITY

This lamp is dimmer-switch compatible and may only be used with a

forward-phase dimmer switch.

WARNINGS

All wires are connected. When unpacking, be careful not to pull wires,

as damage may result. Do not connect electricity until the lamp is

fully assembled. To reduce the risk of ﬁre, electrical shock, or personal

injury, always turn off lamp and allow it to cool prior to replacing

the lightbulb. Do not touch or look directly at the bulb when lamp is

illuminated. Keep ﬂammable materials away from lit bulb.

WARNING: STRANGULATION HAZARD

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3 years of age.

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.

ASSEMBLY AND INSTALLATION

1. Unpack all parts and place them on a protected work surface.

2. Place the table lamp on a clean surface.

3. Carefully place the spider ﬁtter attached to Shade (C) onto the pre-

installed knurled ring attached to the socket, then secure both with

Knurled Ring (B). See Fig. 1

4. Insert Lightbulb (A) into the socket.

5. Insert the plug into a power outlet.

6. Test lamp by turning on the dimmer switch.

7. Assembly is complete.

CARE INSTRUCTIONS

Wipe all surfaces with a soft, dry cloth. Clean glass with a mixture

of mild soap and water. Do not use any harsh cleaners (including

ammonia based products) or abrasives, as they will damage the ﬁnish.

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual