RH MACHINIST Programming manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual

MACHINIST TASK FLOOR LAMP

ASSEMBLY & INSTALLATION INSTRUCTIONS

UNITED STATES ENGLISH

MACHINIST TASK FLOOR LAMP UNITED STATES ENGLISH

RH.COM

REVISION 082422

MACHINIST TASK FLOOR LAMP

PARTS INCLUDED

(A) Bulb (1)

(B) Top Arm (1)

(C) Small Handle (1)

(D) Lower Arm (1)

(E) Big Handle (1)

(F) Lamp Pole (1)

(G) Lamp Base (1)

(H) Base Weight (1)

(I) Washer (1)

(J) Nut (1)

(K) Wrench (1)

(L) Felt Pad (1)

(M) Adjustment Keys (2)

MACHINIST TASK FLOOR LAMP UNITED STATES ENGLISH

RH.COM

REVISION 082422

IMPORTANT: PLEASE READ

IMPORTANT SAFETY FEATURES

BULBS

This lamp has been rated for up to one (1) 6-watt maximum

Type PAR 16 maximum LED Lightbulb (included). To avoid the risk of

re, do not exceed the recommended wattage.

DIMMER SWITCH COMPATIBILITY

This lamp is dimmer-switch compatible and may only be used with a

forward-phrase dimmer switch.

WARNINGS

All wires are connected. When unpacking, be careful not to pull wires,

as damage may result. Do not connect electricity until the lamp is fully

assembled.To reduce the risk of re, electrical shock, or personal injury,

always turn o lamp and allow it to cool prior to replacing the lightbulb.

Do nottouchor look directly at the bulb whenlampis illuminated. Keep

ammable materials away from lit bulb.

WARNING: STRANGULATION HAZARD

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3 years of age.

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.

ASSEMBLY AND INSTALLATION

SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM

THE FUSE BOX OR CIRCUIT BREAKER PANEL.

1. Carefully remove all parts from the box and remove all

plastic coverings.

2. Connect Lamp Pole (F) to Lamp Base (G) and Base Weight

(H). Secure with Washer (I) and Nut (J) using Wrench (K).

3. Remove the adhesive backing from Felt Pad (L) and neatly

apply Felt Pad (L) to the bottom of Lamp Base (G).

4. Screw Small Handle (C) onto Top Arm (B), then screw Big

Handle (E) onto Lower Arm (D).

5. Screw Bulb (A) into the socket.

6. Loosen Adjustment Keys (M) and swing Top Arm (B) and

Lower Arm (D) to adjust the lamp shade to the desired

position, then tighten Adjustment Keys (M) to secure.

7. Restore power then plug the power cord into electrical

outlet to test the lamp.

8. Assembly is complete.

CARE INSTRUCTIONS

Do not use polishes or cleaners on the lamp. Wipe clean with a

soft, dry cloth.