RH PAXTON Programming manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual

PAXTON TABLE LAMP

ASSEMBLY & INSTALLATION INSTRUCTIONS

UNITED STATES ENGLISH

PAXTON TABLE LAMP UNITED STATES ENGLISH

RH.COM

REVISION 120122

PAXTON TABLE LAMP

PARTS INCLUDED

(A) Bulbs (4)

(B) Fixture Body (1)

(C) Shade (1)

(packed separately)

(B)

(A)

PAXTON TABLE LAMP UNITED STATES ENGLISH

RH.COM

REVISION 120122

IMPORTANT: PLEASE READ

PLEASE FOLLOW THE ASSEMBLY INSTRUCTIONS CLOSELY.

IMPROPER ASSEMBLY OR INSTALLATION CAN RESULT IN

PERSONAL OR PROPERTY DAMAGE.

IMPORTANT SAFETY FEATURES

BULBS

This xture has been rated for up to four (4) 40-watt maximum

Type A incandescent lightbulbs, four (4) 9-watt maximum compact

uorescent lightbulbs or four (4) 5.5-watt SBLED lightbulbs. To avoid

the risk of re, do not exceed the recommended wattage.

DIMMERSWITCH COMPATIBILITY

This xture is dimmer-switch compatible, and may only be used with a

forward-phase dimmer switch.

WARNINGS

All wires are connected. When unpacking, be careful not to pull wires,

as damage may result. Do not connect electricity until the xture is fully

assembled.To reduce the risk of re, electrical shock or personal injury,

always turn o xture and allow it to cool prior to replacing lightbulbs.

Do not touch or look directly at bulbs when xture is illuminated. Keep

ammable materials away from lit bulbs.

WARNING: This product can expose you to lead,

which is known to the State of California to cause cancer and

birth defects or other reproductive harm. For more information,

go to www.P65Warnings.ca.gov.

WARNING: STRANGULATION HAZARD

Keep cord at least 3 feet away from cribs, bassinets and toddler beds.

Keep out of reach of children under 3 years of age.

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.

ASSEMBLY AND INSTALLATION

1. Carefully remove all parts from the box and remove all

plastic coverings.

2. Install Bulbs (A) into each of the sockets.

3. Attach Shade (C) (packed separately) to Fixture Body (B).

4. Plug into proper electrical outlet and test xture.

5. Assembly is complete.

CARE INSTRUCTIONS

Do not use polishes or cleaners on the fixture. Wipe clean with

a soft, dry cloth.