RH SAREZZO Programming manual

SAREZZO CYLINDRICAL TABLE LAMP

ASSEMBLY & INSTALLATION INSTRUCTIONS

UNITED STATES ENGLISH

SAREZZO CYLINDRICAL TABLE LAMP UNITED STATES ENGLISH

RH.COM

REVISION 05-31-22

SAREZZO CYLINDRICAL TABLE LAMP

PARTS INCLUDED

(A) Lightbulb (1)

(B) Knurled Ring (1)

(C) Shade (1)

(D) Smooth Ring (1)

Socket

Spider Fitter

Fig. 1

(B)

(D)

Body

Table Surface

Plug

Power Cord

(A)

(B)

(C)

(D)

Dimmer Switch

Lamp Base

Spider Fitter

Socket

SAREZZO CYLINDRICAL TABLE LAMP UNITED STATES ENGLISH

RH.COM

REVISION 05-31-22

IMPORTANT: PLEASE READ

IMPORTANT SAFETY FEATURES

BULBS

This lamp has been rated for one (1) 9-watt maximum Type A19 E26

LED lightbulb (included). To avoid the risk of ﬁre, do not exceed the

recommended wattage.

DIMMER SWITCH COMPATIBILITY

This lamp is dimmer-switch compatible, and may only be used with a

forward-phase dimmer switch.

WARNINGS

All wires are connected. When unpacking, be careful not to pull wires,

as damage may result. Do not connect electricity until the lamp is fully

assembled. To reduce the risk of ﬁre, electrical shock, or personal injury,

always turn off lamp and allow it to cool prior to replacing the lightbulb.

Do not touch or look directly at the bulb when lamp is illuminated. Keep

ﬂammable materials away from lit bulb.

WARNING: STRANGULATION HAZARD

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3 years of age.

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.

ASSEMBLY AND INSTALLATION

1. Carefully remove all parts from the box and remove all plastic

coverings.

2. Place the table lamp on a clean surface.

3. Tighten the Smooth Ring (D) on the socket, carefully place the

spider ﬁtter on the Smooth Ring (D), and secure it with Knurled

Ring (B) (see Fig. 1).

4. Insert the Lightbulb (A) into the socket.

5. Insert the plug into a power outlet.

6. Turn on the dimmer switch.

7. Assembly is complete.

CARE INSTRUCTIONS

Wipe all surfaces with a soft, dry cloth. Clean the table lamp with

a mixture of mild soap and water. Do not use any harsh cleaners

(including ammonia-based products) or abrasives, as they will damage

the ﬁnish.

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual