RH ANVERS TASK User manual

ANVERS TASK FLOOR LAMP

PARTS ENCLOSED

(A) Lamp with Cord (1)

(B) Dimmer Switch (1)

(C) Electrical Plug (1)

(D) Plastic Cover (1)

ANVERS TASK FLOOR LAMP

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY

RECOMMENDED.

1. Do not break or pull out LED panel.

2. Indoor use only.

3. Do not look directly at the lightbulb when lit.

4. Keep lamp away from materials that may burn.

5. If the supply cord or adaptor is damaged, it must be replaced only

by a service agent or a qualied-technician.

WARNINGS

All wires are connected. When unpacking, be careful not to pull

wires, as a bad connection may result. Do not connect electricity

until your fixture is fully assembled. To reduce the risk of fire,

electrical shock, or personal injury, always turn off fixture and allow it

to cool prior to replacing the lightbulb. Do not touch or look directly

at the bulb when fixture is illuminated. Keep flammable materials

away from lit bulb.

WARNING: This product can expose you to lead, which is

known to the State of California to cause cancer and birth defects or

other reproductive harm. For more information, go to

www.P65Warnings.ca.gov.

THIS PRODUCT IS NOT A TOY AND HAS NO PLAY

VALUE.

WARNING: STRANGULATION HAZARD

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3 years of age.

ASSEMBLY & INSTALLATION

1. Carefully remove all parts from the box and remove all plastic

coverings.

2. Connect the plug at end of the cord to the outlet at the side of

Dimmer Switch (B).

3. Remove Plastic Cover (D) from Electrical Plug (C).

4. Plug into proper electrical outlet and test xture.

5. Assembly is complete.

TO OPERATE THE SWITCH:

1. When the lamp is unlit, simply tap the foot dimmer switch to turn

the lamp on.

2. To adjust the brightness, tap and hold your foot on the switch and

the light will begin to dim up or down. To dim the opposite way,

remove your foot, then tap and hold again until the desired light

level is achieved.

3. To turn the lamp o, tap the switch.

CARE INSTRUCTIONS

Do not use polishes or cleaners on the lamp. Wipe clean with a soft,

dry cloth.

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual