WP6070CN-M Plus
WP6101CN-M Plus
Product Code
WP6070CN-M Plus: 7”, 1024 x 600 pixels, WSVGA color
TFT with capacitive touch screen with serial port, 1
Ethernet port.
WP6101CN-M Plus: 10.1”, 1024 x 600 pixels, WSVGA
color TFT with capacitive touch screen with serial port, 1
Ethernet port.
The WP6CN-M Plus is a ThinClient with an inbuilt
browser, which can be used to connect to a remote web
server on the network.
To use the WP6 Plus as a browser, follow these steps to
connect the device to a webserver. The Password for
configuring the device is admin@123.
[Note: For configuring new Password it must be at least 7
or more characters with 1 capital letter (0-9, a-z, A-Z).]
1. Connect an Ethernet cable to the device.
2. Power up the device using 24VDC power supply by
connecting it to the device’s pluggable terminal block.
3. If the browser or the firmware needs to be updated,
connect a USB flash drive to the device.
7.0“: 24VDC(±15%) @800mA,
19.2W
10.1“: 24VDC(±15%) @780mA,
18.72W
1024 x 600pixels, 7" Color TFT,
WSVGA Web Panel capacitive
Touch Screen
1024 x 600pixels, 10.1" Color TFT,
WSVGA Web Panel capacitive
Touch Screen
134.80(H) x 202.10(W) mm
187.90 (H) x 269.30(W) mm
146.20(H) x 213.50(W) x 46.80(D) mm
199.30(H) x 280.70(W) x 46.70(D) mm
2 x 10/100MBps (One 10/100/1000
Mbps and one 10/100 Mbps)
10 to 95% (Noncondensing)
IEC 60068-2-27, 25g, 11ms, 6
shocks per axis, total 18 shocks (X,
Y, Z)
5~150Hz, 3g peak, (X, Y, Z)
IP66 for front panel mounting
Codesys, Ignition SCADA, Node-
RED, Apache, Spider Controls
#Codesys, Ignition Scada, Google, Chromium, Apache, Node-RED etc. are
registered trademarks of their respective owners and Renu electronics does
not claim any rights over them
