Reese 7067000 User manual

These instructions contain IMPORTANT safety information.

Please read and keep for future reference.

2.5 Ton Steel Cable Puller

Model: 7067000

• 6 ft. Max Pull Length

• Dual Steel Gears and Locking Pawls

• Swivel Yoke

• Easy Thumb-Control Lever Release

• Non-Slip Rubber Grip Handle

• Drop-Forged Hooks with Spring-Action Safety

Latches

For assistance with this product or to order

replacement parts, please contact:

Horizon Global

47912 Halyard Drive Suite 100

Plymouth, MI 48170

Technical Service: (800) 234-6992

ReeseBrands.com

Date of Purchase:_________

NOTICE

""!

READ and FOLLOW all instructions and safety messages before using this product.

To prevent serious injury or death.

• Do not lift more than rated capacity.

• Do not operate if damaged or malfunctioning.

• Keep hands and clothing clear of cable drum and ratchet.

• Do not side load, load must be straight line hook to hook.

• Never lift a person or suspend a load above a person.

• Always have at least two full wrap of cable around drum.

• Inspect cable before every use, do not use if damaged.

• Never use a handle extension.

The following items should be inspected prior to each use. If any damage is found, repair before operating the

cable puller.

• Inspect operating mechanism for proper operation and for unusual sound such as but not limited to binding of

the wire rope and bearing squeal.

• Inspect hooks and hook latches for damage.

• Inspect wire rope and connections for damage.

• Inspect hoist lever for bends, cracks or other damage.

• Inspect hoist body for damage.

• Inspect for loose bolts or rivets.

• Inspect for evidence of worn, corroded, cracked, or distorted parts.

• Inspect for evidence of damage to any fasteners used to secure the retaining members.

TO UNREEL CABLE:

Place handle in the forward position and disengage the lever pawl (figure 2) by pushing the thumb control lever

release to the up position (figure 1). Then disengage the retainer pawl by holding the end of the retainer pawl

release tab (figure 3) against the frame allowing the reel to spin freely when the cable is pulled out. Cable length is

6 feet.

TO TIGHTEN CABLE:

Push the thumb control lever release to the down position (figure 4) to engage the lever pawl with ratchet wheel.

Raise handle to tighten cable. Lower handle to ratchet . Repeat as needed.

TO RELEASE CABLE TENSION:

Ensure the load is secured and will not move.!Disengage lever pawl by moving thumb control lever to up position

(figure 1).!Move cable puller handle toward the end with fixed hook, and push handle all the way until the lever

pawl pushes against the retainer pawl.!This will release cable tension one tooth at a time.!Repeat until all tension

is released on the cable.

Thumb control lever release in down

position

FIGURE 4

OPERATION

Thumb control lever release in up position

FIGURE 1

Lever pawl

FIGURE 2

Retainer pawl release tab

FIGURE 3

PREVENTIVE MAINTENANCE

Every 6 to 12 months lubricate all moving parts and friction points with a light oil. Wipe down cable with light oil on

a rag to help prevent corrosion.

REESE One (1) year Limited Warranty

1. Warranty. Horizon Global warrants to the original consumer purchaser ("You") that the Product will be

free from defects in material or workmanship for one year from the date of your retail purchase. Horizon

Global makes no other warranties. If the Product does not comply with the Warranty, Horizon Global will

replace the Product without charge and within a reasonable time or, at Horizon Global option, otherwise

refund the purchase price.

2. Limitations on the Warranty. The Warranty does not cover the following: (a) normal wear and tear; (b)

service or labor charges incurred in removing or replacing any Product; (c) the finish on the Product; (d)

a Product that has been damaged through abuse, neglect, misuse or as a result of any accident or in any

other manner; (e) a Product which is misapplied, overloaded, or improperly installed; and (f) a Product

altered in any manner by anyone other than Horizon Global.

3. Obligations of Purchaser. To obtain the benefits of the Warranty, You must promptly present the

defective Product and proof of purchase to Horizon Global, 47912 Halyard Drive, Suite 100, Plymouth,

Michigan 48170 or any of its branches, factories, or authorized dealers listed in local directories. Any

returned Product that is replaced or refunded becomes the property of Horizon Global.

4. Legal Rights. This Warranty gives You specific legal rights, and You also may have other rights which

vary from state to state. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE ON ANY PRODUCT SHALL BE LIMITED TO ONE YEAR FROM THE DATE OF

RETAIL PURCHASE BY YOU. Some states do not allow limitations on how long an implied warranty lasts,

so the above limitation may not apply to You.

5. Remedy Limits. Replacement of the Product or refund in the manner provided above is Your exclusive

remedy and shall constitute fulfillment of all liabilities of Horizon Global to You whether based on

contract or otherwise. Horizon Global shall not be liable or assume responsibility for the loss of the use

of any vehicle, loss of time, rental of vehicles, loss or damage to personal property, expenses such as

gasoline, telephone, lodging, or towing, or any other incidental or consequential damages incurred as a

result of the use or ownership of any Product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation or exclusion may not apply to You. Any of

the above remedy limitations shall be inoperative to the extent they are not permitted by applicable state

law.

THIS WARNING IS GIVEN IN COMPLIANCE WITH CALIFORNIA PROPOSITION 65

WARNING: This product contains chemicals known to the state of California to cause cancer birth

defects or other reproductive harm.

4 70670n

Rev 010617

This manual suits for next models

Table of contents

Other Reese Tools manuals

Reese

Reese 22K User manual

Popular Tools manuals by other brands

Martor

Martor SECUNORM 175 quick start guide

ERKCO

ERKCO 1000 user manual

jbc

jbc N4473 instruction manual

FEINMETALL

FEINMETALL FZWZ-SET-001 quick start guide

Worx Professional

Worx Professional Sonicrafter WU676 Original instructions

Gage Bilt

Gage Bilt GB713SH Original instructions

Hilti

Hilti DX 9-ENP Original operating instructions

norbar

norbar NORTRONIC 34399 Operator's manual

BGS technic

BGS technic 8578 manual

Makita

Makita DHR241 instruction manual

Motor Guard

Motor Guard JMB-1250 instructions

Power Adhesives

Power Adhesives 805-12 operating instructions

Clemco

Clemco 24189 quick start guide

VVG

VVG VNG 903 Series instruction manual

Hilti

Hilti FX 3-A operating instructions

Grizzly

Grizzly H6472 Manual insert

axing

axing BWZ 5-02 Operation instructions

Dh-Robotics

Dh-Robotics RGI-100 Short manual