Pulsar V653 User manual

CAL. V653

CHRONOGRAPH

ENGLISH

TIME/CALENDAR

CHRONOGRAPH

●Hour, minute, second and 24-hour hands

●Date displayed in numerals

●Measures up to 60 minutes in 1 second increments.

●Split time measurement

English

DISPLAY AND CROWN/BUTTONS

CHRONOGRAPH

minute hand

Second hand

Minute hand

Hour hand

CROWN

a b c

Date

24-hour hand

CHRONOGRAPH second hand

c: Second clickb: First click

a: Normal position

English

SCREW DOWN CROWN

[for models with screw down crown]

Locking the crown

1Turn Crown counterclockwise until you no

longer feel the threads turning.

2Crown can be pulled out.

1Push Crown back in to normal position.

2TurnCrownclockwisewhilepressingitlightly

until tight.

Unlocking the crown

English

●Before setting the time, be sure to check that the CHRONOGRAPH hands are in

“0” position when the chronograph is reset. (For resetting the chronograph, see

“CHRONOGRAPH” on page 6)

ADJUSTING CHRONOGRAPH HAND POSITION

Pull out to second click.

CROWN

CROWN Push back in to normal

position.

CROWN

Pressrepeatedlytoreset

CHRONOGRAPH

hands to “0” position.

▲

* If either of the CHRONOGRAPH hands does not return to “0” position, follow the

procedure below to reset the hands.

English

TIME/CALENDAR SETTING

1Pull out to first click, and turn clockwise until the previous day’s date

appears.

2Pull out to second click when Second hand is at the 12 o’clock position.

3Turn clockwise until the desired date appears.

4Turn to set Hour and Minute hands.

5Push back in to normal position in accordance with a time signal.

CROWN

123

24-hour hand

English

CHRONOGRAPH

minute hand

AStart / Stop / Restart

CHRONOGRAPH

second hand BReset /

Split /Split release

Ex.: 15 minutes and 10 seconds

English

1Use the chronograph to

determine how many seconds it

takes to go 1 km or 1 mile.

2Locate the second marker on the

main dial that corresponds to the

measured seconds, and the

tachymeterscaleitindicatesgives

the average speed per hour.

TACHYMETER

[for models with tachymeter scale on the dial]

To measure the hourly average speed of a vehicle

▲

Ex. 1

“90” (tachymeter scale figure) x

1 (km or mile) = 90 km/h or mph

Tachymeter

scale: “90”

Tachymeter scale can be used only when the time required is less than 60 seconds.

Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to

0.5 km or miles and CHRONOGRAPH second hand indicates “90” on

CHRONOGRAPH

second hand:

40 seconds

English

To measure the hourly rate of operation

1Use the chronograph to measure

the time required to complete 1

job.

2Locate the second marker on the

main dial that corresponds to the

measured seconds, and the

tachymeter scale it indicates gives

the average number of jobs

accomplished per hour.

Ex. 1

▲

“180” (tachymeter scale figure) x

1 job = 180 jobs/hour

CHRONOGRAPH

second hand:

20 seconds

Tachymeter

scale: “180”

Ex. 2: If 15 jobs are completed in 20 seconds:

“180” (tachymeter scale figure) x 15 jobs = 2700 jobs/hour

tachymeter scale:

“90” (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph

“90” (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph

English

ADJUSTING CHRONOGRAPH HAND POSITION

NOTES ON OPERATING THE WATCH

●The CHRONOGRAPH minute hand moves correspondingly with the CHRONOGRAPH

second hand.

●The hands move quickly if the respective buttons are kept pressed.

●The CHRONOGRAPH hands turn counterclockwise by pressing button “A”and

clockwise by pressing button “B”.

TIME/CALENDAR SETTING

●Before setting the time/calendar, be sure to reset the chronograph.

●Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not

change properly.

●When setting the hour hand, be sure to check that AM/PM is correctly set. The watch

is so designed that the date changes once in 24 hours.

* Turn the hands past the 12 o’clock marker to determine whether the watch is set for

the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If

not, the time is set for the P.M. period.

●When setting the minute hand, first advance it 4 to 5 minute ahead of the desired time

and then turn it back to the exact minute.

●The 24-hour hand moves correspondingly with the hour hand.

English

●While the crown is at the second click, do not press the buttons. Otherwise, the

CHRONOGRAPH hands will move. To reset them to “0”position, see “ADJUSTING

CHRONOGRAPH HAND POSITION”on page 4.

CHRONOGRAPH

●While the chronograph is counting, do not pull out the crown to set the time. Otherwise,

the chronograph operation cannot be made.

BATTERY CHANGE

Battery life : Approx. 2 years

Battery : SEIKO SR920SW

Years

●

If the chronograph is used for more than 60 minutes a day, the battery life may be less

than the specified period.

●

As the battery is inserted at the factory to check the function and performance of the

watch, its actual life once in your possession may be less than the specified period.

●

When the battery expires, be sure to replace it as soon as possible to prevent any

malfunction.

Table of contents

Popular Watch manuals by other brands

Pandora

Pandora WATCH2 quick guide

Casio

Casio QW-4343 Service manual

Suunto

Suunto X6 user guide

Seiko

Seiko N830 instruction manual

MotionX

MotionX 365 user guide

Garmin

Garmin VENU SQ 2 owner's manual

QCY

QCY Watch GTC manual

Canyon

Canyon Cindy CNE-KW41WP quick guide

Esq

Esq Watches Operating instructions warranty & service guide

Crane

Crane AA5-CDSM-3A user manual

Timex

Timex W-214 product manual

DETOMASO

DETOMASO MATERA manual

Geemarc

Geemarc Watch N Shake user guide

LORUS

LORUS W590 instruction manual

STENLILLE

STENLILLE Actío user manual

Casio

Casio 5594 Operation guide

Sinn

Sinn HUNTER'S WATCH 3. Edition manual

Slazenger

Slazenger SLZ800 manual