Pulsar W170 User manual
CAL. W170
DIGITAL QUARTZ
ENGLISH
●Time/calendar
●100-hour stopwatch
●Countdown timer
●Regular alarm
●Dual time
●Illuminating light (electroluminescent panel)
2
English
MODE CHANGE
AWith each press, the mode changes in the following order:
TIMER
➡➡
DUAL
TIME
STOPWATCH
TIME/
CALENDAR
➡➡
➡
* The design of the liquid crystal panel differs depending on the model.
A
ALARM
3
English
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
APress to show TIME/
CALENDAR mode.
B
▲
Press for 2 seconds.
▲
C
▲
Select the digits to be
adjusted.✽
D
▲
Set the flashing digits.
▲
BReturn to TIME/CALENDAR
mode.
A
BC
D
Day Date
4
English
✽Selection of the digits
Seconds ➾Minutes ➾ Hour ➾ Year ➾Month ➾Date
➾
12-/24-hour indication
➾
SHOWING THE CALENDAR DISPLAY
CPress and hold in TIME/
CALENDAR mode.
* While the button is kept pressed,
the year, month and date are
displayed.
C
Year
Date
Month
5
English
STOPWATCH MODE
●The stopwatch measures up to 100 hours in 1/100 second increments for the first
hour and in 1 second increments thereafter.
D
CStart / Stop / Restart
APress to show STOPWATCH mode.
Measure split time /
Reset
A
6
English
Split time measurement
START
▲
SPLIT 1
▲
SPLIT 2
▲
• • • •
STOP
▲
RESET
CD C D
D
Measurement of two competitors
START RESET
CD
D
FINISH TIME OF
1ST COMPETITOR
(displayed in the upper row)
▲
C
FINISH TIME OF
2ND COMPETITOR
(displayed in the lower row)
▲
▲
7
English
TIMER MODE
●The timer can be set up to 99 hours and 59 minutes in minute increments.
●After the set time is up, the timer counts up the time up to 59 minutes and 59
seconds.
●The remaining time is displayed in seconds.
TIMER SETTING
APress to show TIMER mode.
BPress for 2 seconds.
C
▲
Select the digits to be adjusted
(hour/minutes).
D
▲
Set the flashing digits.
▲
▲
BReturn to TIMER mode.
A D
BC
Current time
Set time
8
English
TIMER OPERATION
CStart / Stop / Restart
* When the set time is up, a warning sound beeps for 20 seconds.
To stop it manually, press any of the buttons.
Set time
Current time
DReset
9
English
ALARM MODE
●The alarm can be set to ring on a 24-hour basis.
APress to show ALARM mode.
ALARM TIME SETTING BPress for 2 seconds.
C
▲
Select the digits to be adjusted
(hour/minutes).
▲
▲
BC
AD
Current time
Set alarm time
DSet the flashing digits.
▲
BReturn to ALARM mode.
* The alarm mark is automatically
displayed and the alarm is
engaged.
10
English
ENGAGEMENT/DISENGAGEMENT OF ALARM
AND HOURLY TIME SIGNAL
With each press, the engagement/
disengagement of the alarm and hourly
time signal are made as follows:
Alarm engaged
Hourly time signal engaged
Both engaged
Neither engaged
C
Alarm mark
* At the designated time, the alarm rings for 20 seconds. To stop it manually, press any
of the buttons.
* Checking the set alarm time:
Press and hold button D in the TIME/CALENDAR mode. While the button is kept
pressed, the alarm time that has been set is displayed. When the alarm is disengaged,
the set alarm time will not be displayed.
▲
▲
▲
▲
C
Hourly time
signal mark
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar VJ33 User manual
Pulsar
Pulsar W650 User manual
Pulsar
Pulsar Z46H User manual
Pulsar
Pulsar VD84 User manual
Pulsar
Pulsar 5Y67 User manual
Pulsar
Pulsar Linetic Series User manual
Pulsar
Pulsar AS01 User manual
Pulsar
Pulsar w863 User manual
Pulsar
Pulsar YM22 User manual
Pulsar
Pulsar W150 User manual
Pulsar
Pulsar VS75 User manual
Pulsar
Pulsar VD75 User manual
Pulsar
Pulsar NX01 User manual
Pulsar
Pulsar GH Series Product information sheet
Pulsar
Pulsar W864 User manual
Pulsar
Pulsar 8F56 User manual
Pulsar
Pulsar W866 User manual
Pulsar
Pulsar AS32 User manual
Pulsar
Pulsar W855 User manual
Pulsar
Pulsar V33J User manual
