Pulsar 7T62 User manual
CAL. 7T62
ALARM & CHRONOGRAPH
ENGLISH
TIME/CALENDAR
●Hour, minute and small second hands
●Date displayed in numerals
STOPWATCH
●Measures up to 60 minutes in 1/5 second increments.
●Split time measurement
SINGLE-TIME ALARM
●Rings only once at a designated time within the coming 12
hours.
English
2
6
DISPLAY AND CROWN/BUTTONS
c: Second clickb: First click
a: Normal position
Hour hand
STOPWATCH
minute hand
STOPWATCH
1/5-second hand
Minute hand
A
a b c
B
Date
Small second
hand
ALARM hour hand ALARM minute hand
CROWN
English
3
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1Turn Crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
1Push Crown back in to normal position.
2TurnCrownclockwisewhilepressingitlightly
until tight.
Unlocking the crown
English
4
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
●This watch is so designed that the following are all made with the crown at the
second click position:
1) main time setting
2) alarm hand adjustment
3) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1)
and 2) at the same time. If needed, 3) should also be adjusted then.
CROWN Pull out to second click when the second hand is at the 12
o’clock position.
English
5
1) MAIN TIME SETTING
Hour hand
6
Minute hand
Small second hand
CROWN Turn to set the hour and
minute hands.
* It is recommended that the hands be set
to the time a few minutes ahead of the
current time, taking into consideration
the time required to set the ALARM
hands and to adjust the STOPWATCH
hand position if necessary.
2) ALARM HAND ADJUSTMENT
●Set the ALARM hands to the time the main time hands indicate.
English
6
6
Hour hand Minute hand
ALARM
hour hand
ALARM
minute hand
B
BPress repeatedly to set ALARM
hands to the time indicated by
the main time hands.
* ALARM hands move quickly if
button B is kept pressed.
3) STOPWATCH HAND POSITION ADJUSTMENT
●If the STOPWATCH hands are not in the “0” position, follow the procedure below
to set them to the “0” position.
APress for 2 seconds.
* STOPWATCH minute hand turns
a full circle.
▲
English
7
▲
BPress repeatedly to set STOP-
WATCH minute hand to the “0”
position.
* The hand moves quickly if button
B is kept pressed.
▲
APress for 2 seconds.
* STOPWATCH 1/5-second hand
turns a full circle.
▲
BPress repeatedly to set STOP-
WATCH 1/5-second hand to the
“0” position.
* The hand moves quickly if button
B is kept pressed.
▲
6
STOPWATCH
1/5-second
hand
STOPWATCH
minute hand
A
B
English
8
●ALARM and STOPWATCH hands can be readjusted in the following order
by pressing button A for 2 seconds.
ALARM
hands
STOPWATCH
minute hand
STOPWATCH
1/5-second hand
▲
▲
▲
Advance
12 hours.
()Turns a
full circle.
() Turns a
full circle.
()
▲
▲
Push back in to normal
position in accordance
with a time signal.
* After all the adjustments are
completed, check that the main
time and alarm hands indicate
the same time.
CROWN
English
9
1Pull out to first click.
2Turn clockwise until the desired
date appears.
3Push back in to normal position.
CROWN
SETTING THE DATE
●Before setting the date, be sure to set the main time.
6
➠
➠
Date
English
10
6
STOPWATCH
●The stopwatch can measure up to 60 minutes in 1/5-second increments.
●After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours.
AStart / Stop / Restart
BReset /
Split /Split release
STOPWATCH
minute hand
STOPWATCH
1/5-second hand
Other manuals for 7T62
1
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar Linetic Series User manual
Pulsar
Pulsar VR42 User manual
Pulsar
Pulsar NX11 User manual
Pulsar
Pulsar CAL. VD53 User manual
Pulsar
Pulsar YM62 User manual
Pulsar
Pulsar W855 User manual
Pulsar
Pulsar W150 User manual
Pulsar
Pulsar W864 User manual
Pulsar
Pulsar V33J User manual
Pulsar
Pulsar V621 User manual
