Pulsar VD74 User manual
CAL. VD74
ANALOGUE QUARTZ
ENGLISH
lTime display:
Hour and minute hands with small second and
24-hour hands
lCalendar display:
Date and day of the week hands
English
2
DISPLAY AND CROWN/BUTTONS
c: Second click
b: First click
a: Normal position
CROWN
Hour hand Minute hand
Small second hand
Day hand
Date hand
a b c
S U
MO
TU
WE
TH
FR
SA
HOUR.
24
6
12
18
24-hour hand
English
3
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1Turn crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
1Push crown back in to normal position.
2Turn crown clockwise while pressing it
lightly until tight.
Unlocking the crown
English
4
TIME/CALENDAR SETTING
DAY AND TIME SE
TT
ING
CROWN
1Pull out to second click when
small second hand is at the 12
o’clock position.
2Turn clockwise to advance
hour and minute hands until
day hand is set to the desired
day of the week.
3Turn to set the time.
4Push back completely in accor-
dance with a time signal.
1
4
2
3
Small second hand
Day hand
S U
MO
TU
WE
TH
FR
SA
HOUR.
24
6
12
18
24-hour hand
English
5
DATE SETTING
CROWN
1 Pullouttorstclick.
2Turn counterclockwise to set
date hand to the desired date.
3Push in.
Date hand
1
3
2
English
6
NOTES ON OPERATING THE WATCH
DAY AND TIME SETTING
lIt is necessary to adjust the date on the first day after a 30-day month and
February.
lDo not set the date between 10:00 p.m. and 2:00 a.m., as the date may not
change properly. If it is necessary to set the date during that period of time,
first change the time to any time outside of this period, set the date, and then
reset to the correct time.
DATE SETTING
lWhen adjusting the day hand, turn the crown slowly.
lWhen the time is set, the 24-hour hand move correspondingly with the hour
and minute hands.
lWhen setting the hour hand, check that the 24-hour hand is correctly set.
lWhen setting the minute hand, first advance it 4 to 5 minutes ahead of the
desired time and then turn it back to the exact minute.
English
7
BATTERY CHANGE
Battery life : Approx. 3 years
Battery : SEIKO SR626SW
l
As the battery is inserted at the factory to check the function and performance of
the watch, its actual life once in your possession may be less than the specified
period.
lWhen the battery expires, be sure to replace it as soon as possible to prevent any
malfunction.
lWe recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
English
8
WARNING
lDo not remove the battery from the watch.
lIf it is necessary to take out the battery, keep it out of the reach of
children. If a child swallows it, consult a doctor immediately.
lNever short-circuit, tamper with or heat the battery, and never expose
it to re. The battery may burst, become very hot or catch re.
CAUTION
l The battery is not rechargeable. Never attempt to recharge it, as this
may cause battery leakage or damage to the battery.
English
9
TO PRESERVE THE QUALITY OF YOUR WATCH
WATER RESISTANCE
lNon-water resistant
lWater resistance (5 bar)*
If “WATER RESISTANT 5 BAR”
is inscribed on the case back,
your watch is designed and
manufactured to withstand
up to 5 bar and is suitable for swimming,
yachting and taking a shower.
If “WATER RESISTANT 10
BAR”, “WATER RESISTANT 15
BAR” or “WATER RESISTANT
20 BAR” is inscribed on the
lWater resistance (10 bar/15 bar/20 bar)*
case back, your watch is designed and
manufactured to withstand up to 10 bar/15
bar/20 bar and is suitable for taking a bath,
shallow diving, but not for scuba diving.
We recommend that you wear a PULSAR
Diver’s watch for scuba diving.
If “WATER RESISTANT” is
not inscribed on the case
back, your watch is not water
resistant, and care should be
If “WATER RESISTANT” is
inscribed on the case back,
your watch is designed and
manufactured to withstand
lWater resistance (3 bar)
up to 3 bar, such as accidental contact
with splashes of water or rain, but it is not
designed for swimming or diving.
taken not to get it wet as water may damage
the movement. If the watch becomes wet,
we suggest that you have it checked by an
AUTHORIZED PULSAR DEALER or SERVICE
CENTER.
English
10
* Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the
crown is pushed in completely.
Do not operate the crown when the watch is wet or in water. If used in sea water,
rinse the watch in fresh water and dry it completely.
* When taking a shower with the water resistance 5 bar watch, or taking a bath with
the water resistance 10, 15 or 20 bar watch, be sure to observe the following:
•Do not operate the crown when the watch is wet.
•If the watch is left in warm water, a slight time loss or gain may be caused.
This condition, however, will be corrected when the watch returns to normal
temperature.
NOTE:
Pressure in bar is a test pressure and should not be considered as corresponding
to actual diving depth since swimming movement tends to increase the pressure
at a given depth. Care should also be taken on diving into water.
TEMPERATURES
(122° F) may cause battery leakage or
Your watch works with
stable accuracy within a
temperature range of 5° C
and 35° C (41° F and 95° F).
Temperatures over 50° C
shorten the battery life. Do not leave
your watch in very low temperatures
below –5° C (+23° F) for a long time
since the cold may cause a slight
time loss or gain. However, the above
conditions will be corrected when the
watch returns to normal temperature.
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar VD57 User manual
Pulsar
Pulsar Linetic Series User manual
Pulsar
Pulsar P1 User manual
Pulsar
Pulsar N021 User manual
Pulsar
Pulsar Y621 Operating instructions
Pulsar
Pulsar W855 User manual
Pulsar
Pulsar AS01 User manual
Pulsar
Pulsar N944 User manual
Pulsar
Pulsar 7S26 User manual
Pulsar
Pulsar V621 User manual
Pulsar
Pulsar VC10 User manual
Pulsar
Pulsar N021 User manual
Pulsar
Pulsar w863 User manual
Pulsar
Pulsar Y302 User manual
Pulsar
Pulsar V071 User manual
Pulsar
Pulsar V33J User manual
Pulsar
Pulsar YM91 User manual
Pulsar
Pulsar V110 User manual
Pulsar
Pulsar Z021 User manual
Pulsar
Pulsar Pulsar ANALOGUE User manual
