Pulsar YM91 User manual
INSTRUCTION MANUAL FOR WATCH CALIBRE
YM91
THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed or placed inside any part of the body, the battery can
cause severe or fatal injuries within 2 hours or less.
Button batteries are hazardous whether new or used. Keep batteries
out of reach of children.
If you think the battery may have been swallowed or placed inside
any part of the body, seek immediate medical attention. Contact the
Australian Poisons Information Centre immediately on 13 11 26
(New Zealand 0800 764 766) for 24 / 7 fast, expert advice.
CAL. YM91
CHRONOGRAPH
ENGLISH
TIME/CALENDAR
●Hour, minute and small second hands
●Date displayed in numerals
STOPWATCH
●Measures up to 60 minutes in 1/5 second increments.
●Split time measurement
English
2
DISPLAY AND CROWN/BUTTONS
c: Second clickb: First click
a: Normal position
Hour hand
STOPWATCH
minute hand
STOPWATCH
1/5-second hand Minute hand
a b c
Date
Small second
hand
CROWN
B
A
English
3
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1Turn Crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
1Push Crown back in to normal position.
2TurnCrownclockwisewhilepressing it lightly
until tight.
Unlocking the crown
English
4
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
●This watch is so designed that the following are all made with the crown at the
second click position:
1) main time setting
2) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1)
and 2) at the same time.
CROWN Pull out to second click when the small second hand is at the
12 o’clock position.
English
5
1) MAIN TIME SETTING
Hour hand Minute hand
Small second hand
CROWN Turn to set the hour and
minute hands.
* Itis recommended that thehands be set
to the time a few minutes ahead of the
current time, taking into consideration
the time required to adjust the
STOPWATCH hand position .
2) STOPWATCH HAND POSITION ADJUSTMENT
●If the STOPWATCH hands are not in the “0” position, follow the procedure below
to set them to the “0” position.
English
6
▲
▲
BPress repeatedly to set STOP-
WATCH minute hand to the “0”
position.
* Thehand moves quickly if button
B is kept pressed.
▲
APress for 2 seconds.
* STOPWATCH 1/5-second hand
turns a full circle.
▲
STOPWATCH
1/5-second hand
STOPWATCH
minute hand
A
B
* STOPWATCHminutehandturns
a full circle.
APress for 2 seconds.
English
7
▲
▲
Push back in to normal
position in accordance
with a time signal.
CROWN
BPress repeatedly to set STOP-
WATCH 1/5-second hand to the
“0” position.
* Thehand moves quickly if button
B is kept pressed.
English
8
1Pull out to first click.
2Turn clockwise until the desired
date appears.
3Push back in to normal position.
CROWN
SETTING THE DATE
●Before setting the date, be sure to set the main time.
➠
➠
Date
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar W170 User manual
Pulsar
Pulsar VX3K User manual
Pulsar
Pulsar Z46G User manual
Pulsar
Pulsar W890 User manual
Pulsar
Pulsar PBK002 User manual
Pulsar
Pulsar 1N00 User manual
Pulsar
Pulsar W621 User manual
Pulsar
Pulsar Pulsar ANALOGUE User manual
Pulsar
Pulsar CAL. W440 User manual
Pulsar
Pulsar W860 User manual
Pulsar
Pulsar GH Series Product information sheet
Pulsar
Pulsar AS01 User manual
Pulsar
Pulsar CAL. VD53 User manual
Pulsar
Pulsar WM60 User manual
Pulsar
Pulsar P1 User manual
Pulsar
Pulsar 7T62 User manual
Pulsar
Pulsar 5Y85 User manual
Pulsar
Pulsar w863 User manual
Pulsar
Pulsar VD75 User manual
Pulsar
Pulsar N944 User manual
