Prorack S27 User manual
K982
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 2 x 2 x 4 x 4
Revision No: 4D 1
Fitting Kit K982
MAX kgs (lbs)
W/P WHD
Fiat
Freemont, 5dr SUV 12-+ EU 68 kgs (149 lbs) 68 kgs (149 lbs)
Freemont, 5dr SUV 13-+ AU 68 kgs (149 lbs) 68 kgs (149 lbs)
Dodge
Journey, 5dr SUV 08-11 EU 68 kgs (149 lbs) 68 kgs (149 lbs)
Journey, 5dr SUV 08-17 NZ 68 kgs (149 lbs) 68 kgs (149 lbs)
Journey, 5dr SUV 08-17 AU 68 kgs (149 lbs) 68 kgs (149 lbs)
Journey, 5dr SUV 08-17 ZA 68 kgs (149 lbs) 68 kgs (149 lbs)
2
Fitting Kit K982
X
A B C 1 2 3
Freemont, 5dr SUV 12-+ (EU) -80mm 660mm - 960mm 915mm -
-3 -1/8ths" 26" - 37 13/16ths" 36" -
Freemont, 5dr SUV 13-+ (AU) -80mm 660mm - 960mm 915mm -
-3 -1/8ths" 26" - 37 13/16ths" 36" -
Journey, 5dr SUV 08-11 (EU) -80mm 660mm - 960mm 915mm -
-3 -1/8ths" 26" - 37 13/16ths" 36" -
Journey, 5dr SUV 08-17 (NZ) -80mm 660mm - 960mm 915mm -
-3 -1/8ths" 26" - 37 13/16ths" 36" -
Journey, 5dr SUV 08-17 (AU) -80mm 660mm - 960mm 915mm -
-3 -1/8ths" 26" - 37 13/16ths" 36" -
Journey, 5dr SUV 08-17 (ZA) -80mm 660mm - 960mm 915mm -
-3 -1/8ths" 26" - 37 13/16ths" 36" -
3
Fitting Kit EN
K982
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
4
Fitting Kit EN
K982
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
5
Fitting Kit EN
K982
Fitment
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Clamps directly to edge of roof under the
doors
●Please check the front of this manual for
information relating specifically to your
vehicle.
●It is important to put the pads in the correct
position on the vehicle.
●Letters refer to the pad part numbers and
position.
●Pad Part Number:
A = 11-04-219
●Refer to the underside of the pad for the
part number.
6
Fitting Kit EN
K982
●Place rubber pads (supplied with fitting kit)
on the vehicle roof. Pad may vary in shape
to that shown.
●Make sure the pad fits into the holes
underneath the foot.
●Remove locking screw.
7
Fitting Kit EN
K982
●Apply protective strip as shown.
Trim if required.
●It is important to put the clamps in the
correct position on the vehicle.
●Letters refer to the part numbers stamped
on clamps.
●Clamp Part Number:
A = A808
B = B809
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
8
Fitting Kit EN
K982
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
9
Fitting Kit EN
K982
●Tighten locking screw on both legs evenly,
2.5 Nm (1.8 ft lb).
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
10
This manual suits for next models
1
Table of contents
Other Prorack Automobile Accessories manuals
Prorack
Prorack K758 User manual
Prorack
Prorack K571 Install guide
Prorack
Prorack WHISPBAR S41 Operation and installation manual
Prorack
Prorack K145 User manual
Prorack
Prorack K916 User manual
Prorack
Prorack K146 User manual
Prorack
Prorack K405 User manual
Prorack
Prorack K473 User manual
Prorack
Prorack K1074 User manual
Prorack
Prorack K122 User manual
Prorack
Prorack K182 Operation and installation manual
Prorack
Prorack K419 User manual
Prorack
Prorack K723 User manual
Prorack
Prorack K046 User manual
Prorack
Prorack K866 User manual
Prorack
Prorack S4 User manual
Prorack
Prorack K827 User manual
Prorack
Prorack K186 User manual
Prorack
Prorack K813 User manual
Prorack
Prorack K823 User manual
