Prorack K987 User manual

K987

Fitting Kit

EN Fitting Instructions for Basic Carrier CAUTION: Professional

installation recommended

x 4 x 4 x 4 x 8

x 4 x 4 x 4 x 1

x 1

Revision No: 1A 1

Fitting Kit K987

MAX kgs (lbs)

W/P WHD

Tata

Xenon Double Cab, 4dr Ute 09-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)

Xenon Double Cab, 4dr Ute 09-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)

2

Fitting Kit K987

X

A B C 1 2 3

Xenon Double Cab, 4dr Ute 09-+ (AU) -150mm 550mm - 864mm 858mm -

-5 -7/8ths" 21 5/8ths" - 34" 33 3/4ths" -

Xenon Double Cab, 4dr Ute 09-+ (ZA) -150mm 550mm - 864mm 858mm -

-5 -7/8ths" 21 5/8ths" - 34" 33 3/4ths" -

3

Fitting Kit EN

K987

Items you will require:

●Tape measure

Pen

Flat-head screwdriver

Craft knife

Side cutters or tin snips

Hammer

8mm (3/8") punch

Cordless drill

Depth stop

Vacuum cleaner

Rust inhibitor

Small paint brush

Neutral cure silicon sealant

Rivet gun

Attention:

●Attaches with riveted mounts under rubber

ditch mould. Professional installation

advised.

First Time Installation

●Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

4

Fitting Kit EN

K987

●This kit fits type A, B, C and D.

●These instructions show type A crossbar

fitted. They also apply to type B, C and D.

●Use keys to remove covers.

●Use hex screwdriver to reverse adjusting

screw 10 turns.

5

Fitting Kit EN

K987

●Press adjusting screw and pull crossbar

legs out. Refer to the crossbar instructions

for crossbar adjustment method.

●Ensure each end of the crossbar is

adjusted equally.

●Adjust crossbar in or out to suit vehicle.

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Remove plastic clamp block by gripping bar

leg with fingers and push firmly with

thumbs until clamp block drops out behind

leg.

6

Fitting Kit EN

K987

●Select plastic internal block (from fitting kit)

and insert into foot.

●Repeat for all legs.

●Fit rubber pads (supplied with fitting kit) to

foot. Pad may vary in shape to that shown.

●Make sure the pad fits into the holes

underneath the foot.

●Mark reference point on masking tape with

a pen.

●A = Reference point / rear of front door

●Please check the front of this manual for

information relating specifically to your

vehicle.

7

Fitting Kit EN

K987

Permanent Mount Fitment

●Mark as shown.

●Repeat for all positions.

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Line up the centre hole in the mounting

block with the marked reference points.

8

Fitting Kit EN

K987

●Mark as shown.

●Remove as shown.

●Remove as shown.

9

Fitting Kit EN

K987

●Apply protective tape as shown.

●Cut protective strip as shown.

●Cut protective strip as shown.

●Check fit.

10

This manual suits for next models

1

Table of contents

Other Prorack Automobile Accessories manuals

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual