Prorack K731 User manual

Table of contents

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual

K731

Fitting Kit

EN Fitting Instructions for Basic Carrier

x 1 x 1 x 1 x 1

x 1 x 1 x 2 x 2

x 1 x 1 x 6 x 2

Revision No: 1A 1

Fitting Kit K731

MAX kgs (lbs)

W/P WHD

Audi

A3, 3dr Hatch Sep 12-+ EU 60 kgs (132 lbs) 60 kgs (132 lbs)

A3, 3dr Hatch Sep 12-+ ZA 60 kgs (132 lbs) 60 kgs (132 lbs)

A3, 3dr Hatch Sep 12-+ CN 60 kgs (132 lbs) 60 kgs (132 lbs)

2

Fitting Kit K731

X

A B C 1 2 3

A3, 3dr Hatch Sep 12-+ (EU) -410mm 285mm - 855mm 795mm -

-16 -1/8ths" 11 1/4ths" - 33 11/16ths" 31 5/16ths" -

A3, 3dr Hatch Sep 12-+ (ZA) -410mm 285mm - 855mm 795mm -

-16 -1/8ths" 11 1/4ths" - 33 11/16ths" 31 5/16ths" -

A3, 3dr Hatch Sep 12-+ (CN) -410mm 285mm - 855mm 795mm -

-16 -1/8ths" 11 1/4ths" - 33 11/16ths" 31 5/16ths" -

3

Fitting Kit EN

K731

First Time Installation

●Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

●This kit fits type A, B, C and D.

●These instructions show type A crossbar

fitted. They also apply to type B, C and D.

NOTE: Clamp images in these instructions may

not be representative of the clamps in this kit

4

Fitting Kit EN

K731

●Use keys to remove covers.

●Use hex screwdriver to reverse adjusting

screw 10 turns.

●Press adjusting screw and pull crossbar

legs out. Refer to the crossbar instructions

for crossbar adjustment method.

●Ensure each end of the crossbar is

adjusted equally.

5

Fitting Kit EN

K731

●Remove locking screw.

●Apply protective strip as shown.

Trim if required.

●A, B = Clear

C, D, E = Grey

●It is important to put the clamps in the

correct position on the vehicle.

●Letters refer to the part numbers stamped

on clamps.

●Clamp Part Number:

A = 069A

B = 070A

C = 102A

D = 103A

6

Fitting Kit EN

K731

●Attach clamp to each leg. NOTE; clamps

may have labels showing their positions on

the vehicle (For example; "Front Right").

●Refit locking screw so that it goes through

the hole in the clamp. Do not begin to

tighten the locking screw.

●Refer to the underside of the pad for the

part number.

7

Fitting Kit EN

K731

●It is important to put the pads in the correct

position on the vehicle.

●Letters refer to the pad part numbers and

position.

●Pad Part Number:

A = 241

B = 293

C = 294

●Place rubber pads (supplied with fitting kit)

on the vehicle roof. Pad may vary in shape

to that shown.

●Make sure the pad fits into the holes

underneath the foot.

8

Fitting Kit EN

K731

Fitment

●Clamps directly to edge of roof under the

doors

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Place crossbar on vehicle. Minimum

recommended spacing between the bars is

700mm (27 1/2") (unless otherwise stated).

●Adjust the legs on the crossbar so that they

are positioned equally from the ends of the

crossbar, and the clamps engage firmly on

the body work of the vehicle.

●Tighten adjusting screw to 5 Nm (3.7 ft lb)

hand tight.

9

Fitting Kit EN

K731

●Tighten locking screw on both legs evenly.

●Check crossbar is securely attached to the

vehicle.

●Use keys to fit and lock covers

10