Prorack K704 User manual

This manual suits for next models

1

Table of contents

Other Prorack Automobile Accessories manuals

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual

K704

Fitting Kit (Refer to line drawing instructions)

EN Fitting Instructions for Basic Carrier

x 4 x 2 x 2 x 4

x 4 x 1 x 4 x 4

x 4 x 8

Revision No: 5E 1

Fitting Kit (Refer to line drawing instructions) K704

MAX kgs (lbs)

W/P WHD

2

Fitting Kit (Refer to line drawing instructions) K704

X

A B C 1 2 3

3

Fitting Kit (Refer to line drawing instructions) EN

K704

First Time Installation

●Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

●These instructions show type A crossbar

fitted. They also apply to type B, C and D.

●This kit fits type A, B, C and D.

●Use keys to remove covers.

4

Fitting Kit (Refer to line drawing instructions) EN

K704

●Use hex screwdriver to reverse adjusting

screw 10 turns.

●Press adjusting screw and pull crossbar

legs out. Refer to the crossbar instructions

for crossbar adjustment method.

●Ensure each end of the crossbar is

adjusted equally.

●Attaches to factory-fitted mounting points

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Adjust crossbar in or out to suit vehicle.

Refer to the crossbar instructions for

crossbar adjustment.

5

Fitting Kit (Refer to line drawing instructions) EN

K704

●Remove plastic clamp block by gripping bar

leg with fingers and push firmly with

thumbs until clamp block drops out behind

leg.

●Select plastic internal block (from fitting kit)

and insert into foot.

●Repeat for all legs.

●Apply protective strip to roof of the vehicle

as shown.

Trim if required.

6

Fitting Kit (Refer to line drawing instructions) EN

K704

Fitment

●Open or remove fixed-point covers.

●Ensure rubber gasket is pulled away from

fixed point block when installing clamp.

●Place clamp into position as pictured.

●Ensure spring washer is between clamp

and the head of the screw.

●Using 5mm Hex Key supplied with this kit,

fully tighten to 5Nm (3.7 ft lb) hand tight.

●Repeat for all four positions.

●Assemble as shown.

7

Fitting Kit (Refer to line drawing instructions) EN

K704

●Refer to the underside of the pad for the

part number.

●Letters refer to the pad part numbers and

position.

●It is important to put the pads in the correct

position on the vehicle.

●Pad Part Number:

A = 235A

B = 236A

●Fit pad carefully over fixed point and clamp

screw.

●Ensure the fixed-point covers sit vertically

in the recess in the pads.

8

Fitting Kit (Refer to line drawing instructions) EN

K704

●Place crossbars on pads ensuring the pads

fit into the holes underneath the foot and

the grubscrew passes through the hole in

the foot.

●Repeat for all four positions.

●Tighten adjusting screw to 5 Nm (3.7 ft lb)

hand tight.

●Place washer over clamp thread as shown.

●Ensure that tab is inserted into clamp

block.

9

Fitting Kit (Refer to line drawing instructions) EN

K704

●Tighten the plastic knob. The side with the

nut showing should be facing up.

●Ensure the plastic knob is in the position

shown when fully tightened.

●Repeat for all legs.

●Check crossbar is securely attached to the

vehicle.

●Use keys to fit and lock covers

10