PROAIM PF-4TR User manual

23.9ft Fraser (PF-4TR) Jib crane with

PT-1000 Pan tilt head, FR-TS Stand and

FR-D Dolly

(PF-4TR-PP)

INSTRUCTION MANUAL

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by

the applicable copyright statutes or in wring by the Publisher.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 2

INTRODUCTION

PROAIM presents a fully professional 23.9 Fraser lm producon package, a perfect lming

soluon to increase your producon value. Fraser, a DV & Eng jib system has numerous features

to support & oer great performance. It is compable with many types of DV, HDV &broad

casng camera.

The triangular jib crane with high-intensity aluminium alloy structure ts smoothly & securely

with one another providing super rigidity and strength. Precisely designed 2-axis pan-lt

head adds creavity to your shots. Accompanied with various other benets, it completes the

package which is designed to enhance the cinemac quality.

IN THE BOX

Please inspect the contents of your shipped package to ensure you have received all that is

pictured and listed below.

Jib Secons

Jib Stand

Cables length & Qty :

(Red) 14 5 inch-1

(Red) 6 8 inch—1

(Red) 4 7inch—1

(Red) 3 8 inch—1

Cable Guide support rod

Hub locking knob

(Blue) 18 8 inch-1

(Blue)10 10inch-1

(Yellow)17 2inch-1

Dolly

Monitor Supporting Rods

Weight rod with weight closer

Locking pin

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 3

2 X joysck wires

1.(blue ring)

2.(yellow ring)

8meter 7 pin to 7 pin

XLR male wire (1PC)

5 pin lemo male to male

connecng wire (1PC)

3.5mm jack male to male

connecng wire (1 PC)

8meter BNC to BNC long

Connecng Wire (1PC)

4 pin XLR male to female

connecng wire (1PC)

2.5mm jack male to male

connecng wire(1PC) Lemo to din

connecng wire

(1PC)

1 meter BNC connecng

wire(1PC)

Pan Tilt Head 4X Knob

1x motor holding rod Focus & iris

Main Controlling box

Head control

handle

Camera control

handle

lemo to push or pull

connecng wire (1PC)

Main Ac adapter

(1 PC)

Pan lt wires

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 4

 Take out the bolt from the center of dolly and spread it on floor. Then put the bolt back through

the center of dolly again.

Note: To keep the dolly in stac posion

(non-movable), Lock down the wheels.

ASSEMBLING THE DOLLY

 Stretch the legs of jib stand on oor and in order to set the height of stand, loosen the bolts on

legs with the help of allen key and insert the locking pin for extra security of stand legs.

ATTACHING THE JIB STAND

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 5

 Now mount the jib Stand onto the dolly.

 Place the secon 2 with hub mounng on stand and ghten it with the hub locking knob to

secure it properly.

NOTE: For assembling the jib crane, Lock the pan and lt knobs.

Pan locking

knob.

Tilt Locking

knob

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 6

 Aach rst secon with second secon and ghten the allen bolts to secure it.

 Aach cable guide support rod to cable guide clamp on secon-2 and ghten the allen bolts

secon properly to secure it. Then aach the cable guide support rod onto the cable guide

clamp.

 Loosen the allen bolt, in order to

aach cable guide support rod to it.

ATTACHING THE CABLE GUIDE RODS

NOTE : Aach the rest of the secons in the same way starng from the other end of secon 2.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 7

 Now aach hook to the cable guide rod on jib Secon-2. Then aach 4.7 red cable into the

hook & connect it to the clamp on jib secon –1.

 Now repeat the same steps to connect

the 3 8 inch cable from jib secon-2

and aach with clamp on jib secon-1

to clamp on jib secon : 1.

Cable code (red)

ATTACHING THE STABILITY CABLES

 Mount another hook to the cable guide rod on jib secon-2 then aach 6.8 red cable to the

hook and further clamp it on jib Secon-4 & adjust the cable with the help of wire tensioner.

Note: Repeat the same steps to connect 14.5 cable from jib Secon-2 with clamp on jib Secon-6

NOTE: You can adjust the cable with the help of wire tensioner.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 8

 Aach 10.10 blue cable to the clamp on jib Secon-4 & aach it further to the clamp on Jib

Secon-1 & repeat the same steps for other side.

Cable code (blue)

 Align the cables to the cables guide side

rod.

 Note: Repeat the same steps to connect 18.8 blue cable to the clamp on jib Secon-6 &

aach it further to the clamp Jib Secon-1 & repeat the same steps for other side.

 Aach the 17.2 yellow cable to the hub secon and aach it with the head secon of jib

and adjusng the cable with the help of wire tensioner.

Cable code (Yellow)

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 9

 Aach the pan-lt head to the Head plate of crane and and secure it with the help of knobs.

ATTACHING THE PAN TILT HEAD

knobs

 Mount your camera on the mounng plate of pan lt head with the help of provided

checknut.

 Insert the silver 15mm rod into the

camera sliding plate to aach iris and

focus gear.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 10

 Similarly, plug the lemo to din connector wire from camera to circuit board.

 Now Insert the gear into 15mm rod and aach the gear to the iris & lens focusing & iris ring of

your camera. Then plug the iris & focus cable from camera to circuit board.

 Plug the 5 pin male to male lemo wire from head to circuit board of head.

This manual suits for next models

Table of contents

Other PROAIM Professional Video Accessories manuals

PROAIM

PROAIM G-HRZN-01 User manual

PROAIM

PROAIM P-HDRP-01 User manual

PROAIM

PROAIM Kite-33 Starter Manual instruction

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM JB-VG12-01 User manual

PROAIM

PROAIM Quad Plus User manual

PROAIM

PROAIM SnapRig SR228 User manual

PROAIM

PROAIM ATLS-HAP User manual

PROAIM

PROAIM Kite-22 Ultimate Package User manual

PROAIM

PROAIM Atlas V2 User manual

PROAIM

PROAIM Cinema P-W5P-BRZ User manual

PROAIM

PROAIM Flycam SW-015-00 User manual

PROAIM

PROAIM P-MC-CNL User manual

PROAIM

PROAIM SD-FUSN-00 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM P-OHCP-01 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM P-WV-2PP User manual

PROAIM

PROAIM P-W5P24-BASE User manual

PROAIM

PROAIM CINEMA P-2BPM-01 User manual

PROAIM

PROAIM SnapRig CG219 User manual

PROAIM

PROAIM P-18-JS User manual

PROAIM

PROAIM P-CNL-3MC User manual

PROAIM PF-4TR User manual

Popular Professional Video Accessories manuals by other brands