PROAIM Victor Pro User manual

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Victor Pro Video Producon Camera Cart (CT-VCTR-PRO-48)

Assembly Manua l

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

What’s In The Box

Lower Shelf

2 x Crossbars

2 x Hinge Handle

Allen key L– Type, 4 x Screws

Top Shelf

Carrying Handle

4 x Knobs

2 x Pneumac Tires Without

Break With Packing Pouch

2 x Pneumac Tires With

Break With Packing Pouch

Victor Pro Camera Cart Setup

• Open all the 4 locks which are on both sides

end of the cart.

• Unlock the re (With brake) by ipping the

knob.

4 x (31” Length) Rods With Packing

• Aer unlocking all locks, separate the upper

and lower shelf.

• Pull and ip the locking pin in upward direc-

on to open the locks.

NOTE: Two peoples are needed to assemble the cart.

Pneumac Tires With break

• The cart would look like this aer aaching

both the res (With break).

NOTE: To keep the cart in stac posion, lock

the wheels by pushing down the lever.

• Aach the unlocked re (With break) on

lower shelf’s dovetail bracket by sliding on it

as shown in the image.

• Flip the knobs to secure the aached re As

shown in image.

• Unlock the re (non break) by ipping the

knob.

• Aach the unlocked res (non break) on

lower shelf’s dovetail bracket by sliding as

shown in the image.

Pneumac Tires Without Break

• The cart would look like this aer aaching

both the res (non break).

• Tighten all the knobs provided at each corner

of the lower cart. So that all the rods are

properly aached to the cart as shown in the

image.

• Loosen the screw of the carrying handle with

the help of Allen key L-type as shown in im-

age.

• Now place the carrying handle on the side of

the boom shelf.

• Follow the same steps for all screw removal

before aaching it to lower shelf.

• Loose all the 4 knobs of lower shelf’s corner

hole and insert rod into it, as shown in image.

• Now, screw the carrying handle to lower shelf

with the help of allen key L-Type.

Rod

Carrying Handle

• Tighten all the 4 corner knobs of upper shelf

so that upper shelf doesn't fall down.

• Tighten knobs ghtly to set crossbar properly

on the rods.

• Now place the clamps of crossbar on rods, as

shown in image.

• Loosen the knob to open clamp of the cross-

bar.

• Now mount the upper shelf on the top of

the rods by aligning it in the corners.

• Follow same steps for all screws to check

whether they are properly set.

Upper Shelf

Crossbar

• Place handle clamp on the rod and adjust the

hinge handle accordingly.

• Follow same steps to aach second hinge

handle.

NOTE: It helps create the leverage needed while

liing the cart quickly over obstacles, stairs or

other incline surfaces.

• Follow the same step with second knob and

open the ap.

• Loosen the handle to open clamp of hinge

handle.

• Unlatch upper shelf’s ap by sliding the knob.

• The crossbar would look like this aer

aaching both clamps, as shown in image.

Hinge Handle

• The cart would look like this aer following all

the steps correctly.

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and

evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

support and care unl you use our product.

YOUR PROAIM VICTOR PRO VIDEO PRODUCTION CAMERA CART

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

This manual suits for next models

Table of contents

Other PROAIM Camera Accessories manuals

PROAIM

PROAIM JB-AS08-00 User manual

PROAIM

PROAIM JB-FR6T-00 User manual

PROAIM

PROAIM VI-SPCM-01 User manual

PROAIM

PROAIM SnapRig Universal User manual

PROAIM

PROAIM JK-ATV-01 User manual

PROAIM

PROAIM STD-PTZ-01 User manual

PROAIM

PROAIM Cinema Series Comet User manual

PROAIM

PROAIM SL-WG User manual

PROAIM

PROAIM P-OHCP-01 User manual

PROAIM

PROAIM Pro CINEMA Series User manual

PROAIM

PROAIM SnapRig Cage CG215 User manual

PROAIM

PROAIM VI-CYRS-01 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM QR-UD15 User manual

PROAIM

PROAIM TP-TRBS-01 User manual

PROAIM

PROAIM VCTR-CP User manual

PROAIM

PROAIM DL-ANCR-02 User manual

PROAIM

PROAIM P-TRK-12 User manual

PROAIM

PROAIM P-SPK-13 User manual

PROAIM

PROAIM SL-051 User manual

PROAIM

PROAIM P-BKST-02 User manual

PROAIM

PROAIM MB-10 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM BP-302-01 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions