PROAIM DL-BRZA-01 User manual

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Breeza Video/Film Camera Dolly Slider

with Track Ends (DL-BRZA-01)

Assembly Manual

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Proaim Breeza Dolly

3 x Bolts

Sizes: (6 x 12 mm)

2 x End Spacers

An-Tilt Safety

Brake

Flat Mount Plate

Bag Packing

75mm Bowl

Adapter 3 x Type Allen Keys

Sizes: 2.5, 4mm & 5mm

2 x Wrench Sizes: 17 & 13mm

1 x Low-Prole Middle

Support Spacer

Heavy Duty Sled

4 x Double Wheels

100mm Bowl Adapter

End Spacers Assembly

Insert a 4 track into the clamp. Once the

track is properly fitted into the clamp, tightly

secure it with the knob, as shown in the

image.

The height of the end feet of the end spacers

can be adjusted according to your setup

requirement with the help of a knob.

The end feet can be used in both, Hi-Hat and

Low-Hat mode accordingly.

The same process is to be followed for the

other track.

NOTE: It comes with track-ends for overall

secure and smooth track running.

To insert a track in the end spacers, rst

loosen the knobs of the clamp and then slide

up the clamp to easily t the track.

Now place the breeza dolly onto the 4 track.

The handles part of the dolly plaorm should

be inside of the track as shown. Make sure all

wheels are aligned correctly on the track and

dolly runs smoothly.

NOTE: Proaim Breeza Compact Portable Slider

Dolly integrates the latest technology with

supreme quality to maximize your creave

potenal.

Breeza Dolly Setup

Properly secure with a knob aer mounng

the safety brake. Follow the same process on

the other side.

Now mount a 75mm bowl adapter, insert the

screws and properly secure the adapter with

the help of an Allen key.

The 75mm bowl adapter is mounted on the

dolly plaorm, as shown in the image.

NOTE: It has a 16-wheel design with oang

trucks that gives smooth, squeak-free move on a

straight or curved track.

The dolly plaorm already has a 100mm bowl

adapter mount. To mount a 75mm bowl, first

loosen the screws using an Allen key and

remove the 100mm bowl.

NOTE: The Breeza dolly plaorm is designed

with a Bowl mount 75mm, 100mm, and an at

base mount.

Mount the Safety Brake on side of the Breeza

dolly plaorm. Adjust the posion of the

bracket so it goes under the track to prevent

the plaorm from lng out.

Loosen the knob to properly open the safety

brake.

An-Tilt Safety Brake Assembly

Mount Fluid Head on the Bowl Adapter

Aer mounng the uid head on the bowl,

secure it properly by inserng the locking

knob from the boom side.

To mount the at plate, rst remove the

75mm bowl adapter from the dolly plaorm.

For this, use an Allen key, loosen all the screws

and then take out the 75mm bowl adapter.

Mount the at plate on the dolly plaorm,

then insert the screws by aligning to the

boom and properly ghten.

After properly securing the fluid head

(Not Included), mount a camera

(Not Included) on it.

NOTE: Breeza Dolly Slider is sturdy enough to

take a massive payload. And the end-clamps

mount tripods and light stand in seconds. It also

includes so-grip rubber ball feet, support

bracket, and safety wheels that give overall

secure, leveled & greater performance.

Insert the uid head (Not Included) into the

bowl through a screw.

Mount the uid head (Not Included) onto the

at plate and to properly secure, insert a bolt

from the middle/centre of the boom, as

shown in the image.

Mount the end spacers onto the stand

(Not Included) and tighten with the help of a

knob.

NOTE: If you need higher level shots, then you

can put end spacers on Stands.

Mount the Centre Support Spacer onto the

stand. Aer mounng the spacer onto the

stand (Not Included), properly secure it with a

knob.

Aach the Centre Support spacer under the

centre of the track system help of a

Support stand (Not Included).

Insert an 8 track into the clamp. Once the

track is properly ed into the clamp, secure it

with the help of a knob, as shown in the

image. Follow the same process on the other

side.

After properly securing the fluid head

(Not Included), mount a camera on it.

The 8 track is now mounted on the centre

support spacer.

8 Track Setup

Mount the Safety Brake on side of the Breeza

dolly plaorm. Adjust the posion of the

bracket so it goes under the track to prevent

the plaorm from lng out.

Then aach the uid head (Not Included) to

the bowl adapter, as shown in the image.

To secure the uid head (Not Included) from

the boom, insert the locking knob from the

top and secure it properly.

To mount the camera (Not Included)

under-slung, attach the bowl adapter aligning

the bottom threads, then insert the screws and

properly ghten using an Allen key.

Now place the breeza dolly onto the 8 track.

The handles part of the dolly plaorm should

be inside of the track as shown. Make sure all

wheels are aligned correctly on the track and

dolly runs smoothly.

NOTE: The whole dolly system is Quick & Easy

to Set up for a steady workow. It saves a lot of

your valuable producon me.

Underslung Camera Setup

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon

and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

utmost support and care until you use our product.

YOUR PROAIM BREEZA VIDEO/FILM CAMERA DOLLY SLIDER WITH TRACK ENDS

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Other PROAIM Camera Accessories manuals

PROAIM

PROAIM P-WV-2PL-PP User manual

PROAIM

PROAIM PTZ-10 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM 14ft. Jib Arm with Jib Stand User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM FDL-250 User manual

PROAIM

PROAIM JB-FLMS-01 User manual

PROAIM

PROAIM Fusion User manual

PROAIM

PROAIM P-MB-600 User manual

PROAIM

PROAIM P-TP300 User manual

PROAIM

PROAIM VI-CYRS-01 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM Pro CINEMA Series User manual

PROAIM

PROAIM P-GDTR-01 User manual

PROAIM

PROAIM MB-10 User manual

PROAIM

PROAIM Gravita User manual

PROAIM

PROAIM CST-100-01 User manual

PROAIM

PROAIM ROM-1 User manual

PROAIM

PROAIM Kite-22 Ultimate Package User manual

PROAIM

PROAIM Explorer User manual

PROAIM

PROAIM SL-CSMO-01 User manual

PROAIM

PROAIM E-FOCUS PRO ZOOM Manual instruction

PROAIM

PROAIM P-SMMT-01 User manual

PROAIM

PROAIM MB-10 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions