PROAIM KITE-22-WONDER Manual instruction

PROAIM KITE-22 WONDER PACKAGE 2

IT IS IMPORTANT THAT YOU READ AND UNDERSTAND THIS GUIDE BEFORE ATTEMPTING TO

ASSEMBLE OR USE YOUR PROAIM KITE-22 WONDER PACKAGE.

SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE 'ON

LINE' BY CONTACTING YOUR SALES REPRESENTATIVE.

INTRODUCTION

A fully featured camera crane is the creave tool of choice for serious videographers and

semi-professionals. Our Proaim Kite-22 Wonder package is designed for years of trouble-free op-

eraon and has the fastest setup and longest reach of any crane in its price category. With preci-

sion engineering and quality of manufacture, the Proaim Kite-22 Wonder package is truly a pro-

fessional tool that will expand a directors creave opportunies. The smooth-coated, corrosion

resistant cables are easy to handle and will last a lifeme.

WHAT’S IN THE BOX

Please inspect the contents of your shipped package to ensure you have received all that is

pictured and listed below. The grey foam shipping /storage container has been especially

designed to protect your purchase while in transit and is a good place to keep your Proaim

Kite-22 Wonder package contents when not in use. You will receive this package in 8 boxes.

First Box includes

 Jib Secons

Second Box includes

 Jib Secons

Third Box includes

 Accessories of Jib Crane

Fourth Box includes

 Jib Stand

Fih Box includes

 Pan Tilt Head

Sixth Box includes

 Power Pack

Seventh Box includes

 Dolly

NOTE :

 We send the Jib secons in two boxes. One box has the secons with

pipe packing and the other box (cardboard box) has the rest of the

secons. We only send one pipe packing for the jib secons.

 We send the Dolly in cardboard box.

PROAIM KITE-22 WONDER PACKAGE 3

Packaging Material of Jib Accessories Suitcase Box:

1. Spreader 10. Knobs for weight secon

2. Head Plaorm 11. Knobs for xing Hub Assembly

3. Weight rods 12. Locking pin for tripod legs

4. Joysck unit xing plate 13. Knobs for tripod legs

5. Hub Mounng 14. Locking pin for Jib arms

6. Stress Cable 15. Shank for weight secon

7. Shanks for Joining arms 16. Shank for Vercal Pivot Mounng

8. L-brackets for weight secon 17. Proaim Zoom Controller

9. LCD Monitor Adapter

Packaging Material of Pan Tilt Head Box:

1. Gold Pan Tilt Head

2. 1 x Joysck Box

3. 1 x AC Adapter

4. 1 x Universal Adapter

5. 1 x Cables

6. Tools

7. XLR Cable

PROAIM KITE-22 WONDER PACKAGE 4

ASSEMBLY INSTRUCTIONS

For Spreader :

 Spread the spreader on oor and open the legs of

spreader with the help of provided knob.

 Take out the Jib Stand from its case, spread and extend its legs.

For Dolly :

 Open the legs of Dolly and spread it on oor. Then ghten the Allen bolts to secure the legs in

place.

Allen Bolts

This dolly has various holes for exible mounng of Tripod

 Take out the Spreader from the Accessory suitcase OR Take out the dolly from its bag.

 Match the holes of the boom leg secon with the upper leg secon to secure the tripod

stand with the Steel locking Pins and ghten the knobs.

Knob

PROAIM KITE-22 WONDER PACKAGE 5

Warning: We have provided double locking precauons on Jib Stand; Pin is the rst and pri-

mary locking, knob is the secondary locking, so rst lock the Pin to avoid slipping of stand.

 In case of Spreader : Fix the tripod stand with Spreader and ghten the top ratchet knobs

of stand to secure it in place.

 In case of Dolly : Insert the tripod legs into the foots on the dolly.

Dolly Foots

 Install the Hub Assembly by sliding the boom of the hub assembly

into the stand’s Mount opening.

Warning: This is the Pan Fricon Knob. Never pan the Jib with this knob

ghtened.

If this knob turns while panning, it is too ght. Only ghten while parking

the jib !

INSTALLING THE HUB ASSEMBLY

Note : The Hub Assembly has several mounng holes. You can mount LCD

Monitor or Joysck box to this assembly if you want.

INSTALLING THE JIB SECTIONS

 Install the Secon 7 & 6 (largest diameter secon to the rear) to the vercal pivot point with the

long bolt, washers and nut. Tighten the nut properly to secure the secon.

PROAIM KITE-22 WONDER PACKAGE 6

 Slide Secon 5 into Secon 6 and join with ring pin.

 Install the pin at the rst join holes of the secons and bolt, washers and nut from side at

the second holes of secon.

First hole

Second Hole

This Ring Pin is to avoid the play in Jib.

This knob is for ghtening the Jib secons.

IMPORTANT

ASSEMBLING THE REAR FRAME

 Take the two 16mm thick rods and two 25mm thick rods.

Aach these rods altogether so that it makes a rectangle

and for this insert the 16mm rods into slots of 25mm rods.

 Aach the Allen bolts by screwing in with hand and ghten with Allen key at all the four

points to secure properly.

 Similarly insert all the secons one by one (small to the big) and install the pin and bolt ,

washers and nut to secure each secon.

PROAIM KITE-22 WONDER PACKAGE 7

 Align the threads of joysck plate with the threads of the 1mm rods and ghten the Allen

bolts with Allen key.

 Take out the two black tubes from the weight rod.

 Insert one L-Bracket and then the central black tube with washers at both ends into the

weight rod.

 Insert the second L-Bracket & the third black tube at the end of the weight rod.

 Detach the top screw from the frame from both sides.

 Aach the rod with L-Brackets with the rectangular frame and ghten the top screw. Then

screw-in the knobs at both ends.

PROAIM KITE-22 WONDER PACKAGE 8

 Aach the bigger weight rod with L-Brackets, for this insert the rod into one L-Bracket then

add the black tube with white washers at both the sides, insert the rod into the other L-

Bracket and then add the black tube. Tighten the nut and then aach the knob at the end.

INSTALLING THE REAR FRAME

 To mount the Rear secon, align the Assembly’s ‘L’ brackets to the tail of jib secon and in-

sert the bolt with washers through one end of the secon to the other. Slide the bolt

through and hand ghten.

 Add weights (Not Included) to the rear weight secon at both sides and ghten the weight

closer knobs to secure properly.

INSTALLING THE HEAD PLATFORM

 Install the Head Plaorm assembly (leveling arm up) to the end of the smallest secon with

the provided bolt, sha collars, washers and nut. Tighten all the Allen bolts and nuts to se-

cure properly.

NOTE: Add white washers as per requirement on both sides of jib secon so that there is no

play in between head plate & Jib secon.

PROAIM KITE-22 WONDER PACKAGE 9

 Connect the Head Plaorm Leveling Cable by hooking the turnbuckle ends .

INSTALLING THE STRESS CABLE

INSTALLING THE PAN TILT HEAD

 Aach the Pan Tilt Head with the Jib. There are 4 mounng holes on the pan lt as well as

the jib plate. Align the holes and aach it with the screws. Tighten the wing nuts to secure

properly.

 Adjust the mounng extension so that the pan motor is in the rear facing posion before

mounng.

 Install your cable starng at the camera end; leaving enough cable slack for the camera for

full pan & lt movement, you may need to add Velcro to loop the cable around the jib arm.

POWER HEAD ANATOMY

A Square Mount for Crane / Tripod Stand

B 12v motor for Pan

C Brass Gear for Pan

D Inbuilt XLR Cable connector

E Head Frame

F 12v motor for Tilt

G Brass Gear for Tilt

H Camera Plaorm

PROAIM KITE-22 WONDER PACKAGE 10

BALANCING

Balancing the camera on the head is crical to smooth operaon.

 Find the horizontal balance point of your camera by using 2 ngers of one hand while hold-

ing the handle.

 Mark this point on the side of the camera with chalk or tape.

 Turn the unit on and move the lt control unl the camera plate is vercal.

 Loosen the two screws holding lt motor. (DO NOT REMOVE).

 Grasp the motor and turn slightly to disengage gears.

 Mount the camera to the camera plate with the screw provided.

 Tighten by threading the nut up to the boom of the camera plate securely.

 Make sure your balance point previously marked with chalk or tape is in the middle of the

plate.

 Loosen the knob below the camera plate and slide the camera and plate up or down unl

the center line of your camera is about in the middle of the large gear. Now ghten knob.

 If the camera is perfectly balanced it will stay in any posion while motor gear is sll un-

aached.

 Grasp the motor and turn it back unl the gears mesh.

 Gently ghten motor screws.

 Secure the camera.

Note All reducon boxes have a small amount of backlash. The balancing of the camera will

reduce the backlash to a minimum making it felt at the top of the lt arc.

CABLES & CONTROL BOX

 Install the 12 volt DC power (4 pin XLR) in rear of Joysck Box.

Note: Any 12 volt baery may operate the PROAIM™ GOLD PAN

TILT HEAD as long as the connector mates and is #1 pin Negave

and #4 pin Posive.

JOYSTICK

 The joystick may be operated hand held, from a flat surface like a table top or attached to

the boom arm of the jib.

HEAD CABLE

PROAIM™ GOLD PAN TILT HEAD Digital only

 Attach the 4-pin power cord to rear of joystick box.

 Attach the both two pin male connector of cable to the both two

pin female connector of head for panning & tilting.

 If the joystick control is opposite, undo the connectors at the mo-

tors, rotate 180 degrees and re-install.

CAUTION: DO NOT USE A UNREGULATED POWER SUPPLY! IF USING A REGULATED POWER SUP-

PLY IT MUST PRODUCE LESS THAN 12 VOLTS. MORE THAN 24 VOLTS MAY CAUSE PERMANENT

DAMAGE.

Other manuals for KITE-22-WONDER

Table of contents

Other PROAIM Camera Accessories manuals

PROAIM

PROAIM SP-CMFY-01 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM PTZ-10 User manual

PROAIM

PROAIM TRK-4P User manual

PROAIM

PROAIM SnapRig Cage CG215 User manual

PROAIM

PROAIM P-TWS-QS User manual

PROAIM

PROAIM CT-STRK-02 User manual

PROAIM

PROAIM CINEMA Series User manual

PROAIM

PROAIM Kite-22 Ultimate Package User manual

PROAIM

PROAIM MC-RONS User manual

PROAIM

PROAIM CINEMA QR-ELMG-01 User manual

PROAIM

PROAIM P-SPK-13 User manual

PROAIM

PROAIM SL-CNL User manual

PROAIM

PROAIM DL-PLRS-P01 User manual

PROAIM

PROAIM E-FOCUS PRO ZOOM Manual instruction

PROAIM

PROAIM P-MTCL-STD-BLK User manual

PROAIM

PROAIM CINEMA P-SWCC-10 User manual

PROAIM

PROAIM P-OHBP-01 User manual

PROAIM

PROAIM TP-SPHF-01 User manual

PROAIM

PROAIM VI-2AXS-01 User manual

PROAIM

PROAIM CST-100-01 User manual

PROAIM

PROAIM P-QRG-01 User manual

PROAIM

PROAIM Cinema ROM-1 User manual

PROAIM

PROAIM DL-ANCR-02 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions