PEERLESS HL4UN-002 Guide

1 of 2 ISSUED: 06-03-11 SHEET #:120-9110-1

Insert two 1/4-20 x 1-3/4" carriage bolts (A)

into bottom of display base as shown in detail 1.

Model: HL4UN-002, HL4UN-002-Q10

Installation and Assembly:

Lock Down Hardware for Display Base Stands

BOTTOM OF BASE

FRONT

A B

DETAIL 1

MEASURE

DISTANCE

Measure distance between center lines of cut outs in

bottom of display base. Use measurement to mark

location of holes at point 1 and point 2, on table.

Drill two holes using a 9/32'' drill bit.

POINT 1

POINT 2

• drill

• 9/32" drill bit

• 5/8" open box wrench

E F G

HTOOLS NEEDED

HL4UN-002 HL4UN-002-Q10

Description Qty. Part # Qty. Part #

1/4-20 x 1 3/4" carriage bolt 2 520-1017 20 520-1017

BM4 x 16 mm phillips trilobe screw 2 520-2621 20 520-2621

CM4 x 16 mm socket pin screw 2 520-1087 20 520-1087

D1/4-20 sloped nut 3 530-0035 23 530-0035

EM4 x 12 mm socket pin screw 2520-1079 20 520-1079

F#8 flat washer 2540-1001 20 540-1001

Gplastic cap 2590-1294 20 590-1294

H4 mm allen wrench 1 560-9646 3 560-9646

Parts List

NOTE: Display and base may appear

different than illustrated

2 of 2 ISSUED: 06-03-11 SHEET #:120-9110-1

Hand tighten slope nut (D) through 1/4-20 x 1-3/4" carriage bolt (A) until snug against bottom of desktop surface.

Thread another slope nut (D) upside-down, about two turns from rst slope nut (D). Insert an open box wrench

between both slope nuts (D) and tighten. NOTE: Avoid jamming both slope nuts (D) together, doing so may make

it difcult to remove slope nut used for tightening rst slope nut (D) as shown in gure 3.1. After slope nut is secure

remove bottom slope nut as shown in gure 3.2. Repeat with remaining 1/4-20 x 1 3/4" carriage bolt (A).

Fasten two plastic caps (G).

TIGHTENING

SLOPE NUT

BOTTOM OF DESKTOP

FIGURE 3.1 FIGURE 3.2

NOTE: Do not overtighten slope nut (D)

plate may distort

FRONT

Thread two M4 x 16 phillips pan trilobe screws (B) to bottom display attachment holes as shown in g. 4.1.

Remove the two M4 x 16 phillips pan trilobe screws (B) and attach display screen to display base using two M4 x

16 mm socket pin screws (I) or M4 x 12 mm socket pin screws (E) with #8 at washers (F), as shown in gure 4.2.

Tighten with 4 mm security allen wrench (H). Use TV supplied screws for remaining holes.

g 4.1 g 4.2

DISPLAY SCREEN DISPLAY SCREEN

DISPLAY BASE

NOTE: Display and base may appear

different than illustrated

NOTE: Screws are installed using bottom

two display mounting locations.

Installation of Security Screws for Base/Screen Assembly

C or E

• If screws don’t get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly

secured, damage may occur to screen or product may fail.

WARNING

All other brand and product names are trademarks or registered trademarks of their respective owners.

This manual suits for next models

Other PEERLESS Rack & Stand manuals

PEERLESS

PEERLESS FPZ-600 Guide

PEERLESS

PEERLESS PARAMOUNT PA730 Guide

PEERLESS

PEERLESS Paramount PF660 Guide

PEERLESS

PEERLESS Slimline OP-LWB 530 Guide

PEERLESS

PEERLESS PLT BLK Guide

PEERLESS

PEERLESS PWMT300 User manual

PEERLESS

PEERLESS HCW201 User manual

PEERLESS

PEERLESS LCT Series Guide

PEERLESS

PEERLESS ACC-V800X Guide

PEERLESS

PEERLESS Smartmount ST670 Guide

PEERLESS

PEERLESS Smartmount SA752P Guide

PEERLESS

PEERLESS WSP700 Instruction Manual

PEERLESS

PEERLESS SmartMount SA770PU Guide

PEERLESS

PEERLESS Vision Point LCFS 100 Guide

PEERLESS

PEERLESS A100IWBMOUNT Guide

PEERLESS

PEERLESS SmartMount ST 635 Guide

PEERLESS

PEERLESS DST940 Guide

PEERLESS

PEERLESS Paramount PSP2 Guide

PEERLESS

PEERLESS IWB600-WB User manual

PEERLESS

PEERLESS PARAMOUNT PSP2-S Guide

PEERLESS

PEERLESS MIS488 Guide

PEERLESS

PEERLESS SmartMount RTFPA45 Guide

PEERLESS

PEERLESS Solid-Point PLCM UN1 Guide

PEERLESS

PEERLESS Paramount PS200 Guide

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 