Parkside PHZ 3 A1 User manual

IAN 364230_2010

HAMMER PULL BAR / HAMMER-ZUGEISEN /

TIRE-LAME MARTEAU PHZ 3 A1

TIRE-LAME MARTEAU

Mode d’emploi

HAMMER-ZUGEISEN

Bedienungsanleitung

HAMMER PULL BAR

Operating instructions

HAMER-TREKIJZER

Gebruiksaanwijzing

PŘÍKLEPOVÉ KLADIVO

Návod k obsluze DOCIĄGACZ DO PANELI

Instrukcja obsługi

KLADIVOVÉ ŤAHADLO

Návod na obsluhu

HAMMERTRÆKNINGSJERN

Betjeningsvejledning

KIT COLOCACIÓN SUELOS

LAMINADOS

Instrucciones de uso

GB/ IE Operating instructions Page 1

DE/AT/CH Bedienungsanleitung Seite 9

FR/BE Mode d’emploi Page 17

NL/BE Gebruiksaanwijzing Pagina 25

CZ Návod k obsluze Strana 33

PL Instrukcja obsługi Strona 41

SK Návod na obsluhu Strana 49

ES Instrucciones de uso Página 57

DK Betjeningsvejledning Side 65

PHZ 3 A1 GB│IE │ 1 ■

Contents

Introduction...................................2

Information about these operating instructions.................2

Proper use ............................................2

Safety .......................................3

Package contents ..............................4

Use ..........................................4

Cleaning and storage...........................6

Disposal......................................6

Service .......................................7

Importer .....................................8

PHZ 3 A1

■ 2 │ GB│IE

Introduction

Information about these operating instructions

Congratulations!

You have purchased a high-quality product. Familiarise

yourself with the product before using it for the ﬁrst time. To

do this, read the following operating instructions thoroughly. Use the

product only as described and for the range of applications speciﬁed.

Keep these operating instructions in a safe place. Please also pass

these operating instructions on to any future owner(s).

Proper use

The product is used exclusively for the joint-free bonding of laminate

and parquet ﬂooring and replaces the need for hammers, mallets and

pull bars. The product can be used for all material thicknesses from

7 to 13mm. Commercial or industrial use is not permitted. No liability

will be assumed in cases of improper use. No liability will be assumed

for damage caused by misuse or improper handling, the use of force

or unauthorised modiﬁcation. The risk is borne solely by the user.

PHZ 3 A1 GB│IE │ 3 ■

Safety

■ Check the product before every use to make sure it is in perfect

condition. Do not use the product if it is damaged in any way.

■ Do not allow children to use the product unless they are being

supervised. Children are not always able to correctly recognise

potential dangers. This product is not a toy.

■ This product is not intended for use by individuals (including

children) with reduced physical, sensory, or mental capabilities.

It may also not be used by individuals who lack experience and/

or knowledge unless they are supervised by a person responsible

for their safety or have received instructions on how to use the

product from such a person.

■ Use protective equipment. For your own

safety, always wear ear muﬀs, a breathing

mask/dust mask, safety goggles and safety gloves.

■ Warning! Risk of crushing! A jerking movement is necessary when

using the product. Make sure that you do not injure yourself.

■ Rusty discolorations or other signs of chemical or mechanical

change to the parts can cause premature failure of the parts.

PHZ 3 A1

■ 4 │ GB│IE

Package contents

▯ Hammer Pull Bar

▯ These operating instructions

NOTE

► Check the package for completeness and signs of visible damage.

► If the delivery is incomplete or damage has occurred as a result

of defective packaging or during transport, contact the customer

service hotline (see section Service).

Use

NOTE

► The product can be used for all material thicknesses from 7 to

13mm.

With the help of the product, you can join laminate and parquet boards

without joints and without the need for hammers, tapping wood and

pull bars. The integrated pull bar transfers the force to the edge of the

board when pulling the carriage towards the rear stop. The product is

particularly suitable for the last row of boards by the wall.

♦ Place the pull bar on a board.

♦ Loosen the black locking screw on the carriage so you can move

the carriage.

♦ Hold the back stop with one hand to stabilise the product.

PHZ 3 A1 GB│IE │ 5 ■

WARNING! RISK OF CRUSHING!

► Be careful not to hurt your ﬁngers when moving the carriage

forwards or backwards.

♦ Hold the red handle ﬁrmly with your other hand and push the

carriage towards the pull bar as a starting position.

♦ Pull the red handle towards the rear stop. The board is joined

seamlessly.

♦ If the board is not joined seamlessly, repeat the process with more

force.

♦ After use, tighten the black locking screw on the carriage to

prevent unintentional movement of the carriage.

PHZ 3 A1

■ 6 │ GB│IE

Cleaning and storage

ATTENTION! PROPERTY DAMAGE!

► Do not use aggressive or abrasive cleaning agents, as these

can damage the surfaces of the product.

♦ Clean the product using a dry cloth.

♦ Store the product in a clean, dry location away from direct

sunlight.

Disposal

Dispose of the product via an approved waste disposal

company or your municipal waste disposal facility.

Comply with all applicable regulations. Please contact

your waste disposal facility if you are in any doubt.

Your local community or municipal authorities can

provide information on how to dispose of the worn-out

product.

The product is recyclable, subject to extended producer

responsibility and is collected separately.

PHZ 3 A1 GB│IE │ 7 ■

Dispose of the packaging in an environmentally friendly

manner.

Note the labelling on the packaging and separate the

packaging material components for disposal, if neces-

sary. The packaging material is labelled with abbrevia-

tions (a) and numbers (b) with the following meanings:

1–7: plastics, 20–22: paper and cardboard, 80–98:

composites.

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: [email protected]

Service Ireland

Tel.: 1890 930 034

(0,08EUR/ Min.,(peak))

(0,06EUR/ Min.,(oﬀ peak))

E-Mail: [email protected]

IAN 364230_2010

PHZ 3 A1

■ 8 │ GB│IE

Importer

Please note that the following address is not the service address.

Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Other manuals for PHZ 3 A1

This manual suits for next models

Table of contents

Languages:

Other Parkside Tools manuals

Parkside

Parkside PDNE 4000 A1 User manual

Parkside

Parkside PDST 10 A2 User manual

Parkside

Parkside PMFWZ 1 A1 Technical specifications

Parkside

Parkside PDT 40 C2 User manual

Parkside

Parkside 1200 A1 User manual

Parkside

Parkside 275674 User manual

Parkside

Parkside PSS 65 A1 User manual

Parkside

Parkside PDT 40 C2 User manual

Parkside

Parkside PAMFW 12 C3 User manual

Parkside

Parkside PDMH 4500 A2 User manual

Parkside

Parkside PDLA 6.3 A1 User manual

Parkside

Parkside PDST 10 B3 User manual

Parkside

Parkside PDST 10 B3 User manual

Parkside

Parkside PDT 40 B2 Owner's manual

Parkside

Parkside PDSS A1 User manual

Parkside

Parkside PDST 10 B3 User manual

Parkside

Parkside PDSP 1000 D4 User manual

Parkside

Parkside PDT 40 B2 User manual

Parkside

Parkside PAGG 4 A1 User manual

Parkside

Parkside PDST 10 A2 User manual

Parkside

Parkside 89568 User manual

Parkside

Parkside BMR 1400 User manual

Parkside

Parkside PDT 40 D3 User manual

Parkside

Parkside PBSG 95 A1 User manual

Popular Tools manuals by other brands

Martor

Martor SECUNORM 175 quick start guide

ERKCO

ERKCO 1000 user manual

jbc

jbc N4473 instruction manual

FEINMETALL

FEINMETALL FZWZ-SET-001 quick start guide

Worx Professional

Worx Professional Sonicrafter WU676 Original instructions

Gage Bilt

Gage Bilt GB713SH Original instructions

Hilti

Hilti DX 9-ENP Original operating instructions

norbar

norbar NORTRONIC 34399 Operator's manual

BGS technic

BGS technic 8578 manual

Makita

Makita DHR241 instruction manual

Motor Guard

Motor Guard JMB-1250 instructions

Power Adhesives

Power Adhesives 805-12 operating instructions

Clemco

Clemco 24189 quick start guide

VVG

VVG VNG 903 Series instruction manual

Hilti

Hilti FX 3-A operating instructions

Grizzly

Grizzly H6472 Manual insert

axing

axing BWZ 5-02 Operation instructions

Dh-Robotics

Dh-Robotics RGI-100 Short manual