Omron Sysmac CJ1 User manual
smart, seamless and sliceable
CJ1-SERIES
A new strategy in machine control
Advanced Industrial Automation
To stay competitive in the machine building industry you have to be flexible, efficient and fast.
Omron’s C 1 series gives you this competitive edge. This new family of PLCs ranges from powerful
CPU models that offer total machine control, to very small CPUs that enable you to modularise
or ‘slice’ your machine into logical sections. You don’t even need to consider where to slice the
machine! Any I/O units can be mounted on any CPU, enabling you to distribute all the functions
you need to wherever you need them. And no matter how complex your machine becomes,
there’s always a CPU and a combination of I/Os to match your needs. It’s the ultimate in
machine sliceability and scalability!
odularising machines
was never so flexible!
Fast and easy to configure
C 1 modules connect together using reliable, high-quality
locking connectors. This eliminates the need for a bulky
PLC rack, and makes the C 1 fast and easy to configure
and install in control panels.
Actual
size
Seamless communication throughout
Built-in routing functions allow seamless communication over multiple network
layers. Programming and data transfer are fully transparent through open
networks like Ethernet, PROFIBUS-DP and DeviceNet, as well as Omron’s
cost-effective proprietary networks. C 1’s open communication units allow
the PLCs to communicate to nearly any 3rd party device.
Intelligence built-in
The core of intelligence of your machine control
system is the PLC CPU. The C 1-series CPUs range
from cost-effective units for simple sequence
control, to ultra-fast high-capacity models
handling up to 2560 I/O points. The main benefit
to you is that any PLC module can be mounted on
any CPU type. This reduces the number of different
product families for which you have to keep
modules in stock.
Analogue and digital I/O units
C 1 I/O units, ranging from basic to ultra-compact high-density
models, can be placed anywhere in the system, enabling you
to distribute all the functions you need, to wherever you
need them.
Control units
Specialised control units for motion control and
temperature control take the load off the CPU tasks
and allow for easy structured programming.
And Omron’s seamless communication allows fully
distributed machine control, configurable through
any access point in the network.
Omron’s supporting software suite
Omron’s CX-automation suite is designed to help you
unleash the power and flexibility of the C 1 series.
With these software tools you can configure, program,
commission, visualise and maintain all Omron’s PLCs,
and all using the same seamless communication.
You simply choose the software tools you need now,
and add other software components later.
When it comes to PLCs, Omron’s reputation for quality, reliability and advanced
technology is unsurpassed. The C 1 series is no exception. With C 1 you can mix and
match CPU power, special function units, and an extensive range of standard I/O units
to suit every machine automation need. With its credit-card size profile, C 1 offers the
best size/performance ratio in the industry. And without a separate back-plane,
the mounting space required is never more than the units you install.
CJ1 – the best size/performance
ratio in the business
Features and benefits at a glance
Features
Benefits to you:
• Wide range of compatible CPUs and I/O units
- One scaleable PLC family to match all your needs
•High-speed CPUs with instruction times down to 20 nanoseconds
- Processing speed up to five times faster than typical CPU
•Ultra-compact design
- 90mm 65mm – a profile slightly larger than a credit card
•No need for a back-plane
- No restrictions on width, and is fast and easy to install
and configure
•Supports DeviceNet, CompoBus/S, PROFIBUS-DP, Ethernet,
and Controller Link
- High-performance data e change and programming using
these network systems
•A full suite of compatible software tools
- Omron’s CX Automation suite supports the entire Omron
PLC product line.
SF8P_CJ1_ENG01_1002
OMRON EUROPE B.V.
Wegalaan 67-69, NL-2132 D, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.eu.omron.com
For the Middle East, Africa and other countries in Eastern Europe,
Tel: +31 (0) 23 568 13 22 www.eu.omron.com
Automation and Drives
• Programmable logic controllers • Networking
• Human-machine interfaces • Inverter drives • Motion control
Industrial Components
• Relays, electrical and mechanical • Timers • Counters
• Programmable relays • Low voltage switchgear • Power supplies
• Temperature & process controllers • Solid-state relays
• Panel indicators • Level controllers
Sensing and Safety
• Photoelectric sensors • Proximity sensors • Rotary encoders
• Vision systems • RFID systems • Safety switches
• Safety relays • Safety sensors
Austria
Tel: +43 (0) 1 80 19 00
www.omron.at
Belgium
Tel: +32 (0) 2 466 24 80
www.omron.be
Czech Republic
Tel: +420 (0) 267 31 12 54
www.omron.cz
Denmark
Tel: +45 43 44 00 11
www.omron.dk
Finland
Tel: +358 (0) 9 549 58 00
www.omron.fi
France
Tel: +33 (0) 1 49 74 70 00
www.omron.fr
Germany
Tel: +49 (0) 2173 680 00
www.omron.de
Hungary
Tel: +36 (0) 1 399 30 50
www.omron.hu
Italy
Tel: +39 02 32 681
www.omron.it
Netherlands
Tel: +31 (0) 23 568 11 00
www.omron.nl
Norway
Tel: +47 (0) 22 65 75 00
www.omron.no
Poland
Tel: +48 (0) 22 645 78 60
www.omron.com.pl
Portugal
Tel: +351 21 942 94 00
www.omron.pt
Russia
Tel: +7 095 745 26 64
www.russia.omron.com
Spain
Tel: +34 913 777 900
www.omron.es
Sweden
Tel: +46 (0) 8 632 35 00
www.omron.se
Switzerland
Tel: +41 (0) 41 748 13 13
www.omron.ch
Turkey
Tel: +90 (0) 216 326 29 80
www.omron.com.tr
UNITED KINGDOM
Omron Electronics Ltd
1 Apsley Way, Staples Corner, London, NW2 7HF, UK
Tel: +44 (0) 870 752 0861
Fax: +44 (0) 870 752 0862
www.omron.co.uk
Other manuals for Sysmac CJ1
1
This manual suits for next models
1
Other Omron Controllers manuals
Omron
Omron NL-200 User manual
Omron
Omron TJ1-MC04 User manual
Omron
Omron NC1-510000 User manual
Omron
Omron CK5M Series Instruction Manual
Omron
Omron CK3M Seres Instructions for use
Omron
Omron Z500 Series User guide
Omron
Omron F3SX-N-L1D1RR2 User manual
Omron
Omron Sysmac CP1H User manual
Omron
Omron TJ1-MC04 Owner's manual
Omron
Omron SYSMAC CS1W-EIP21 User manual
Omron
Omron C200HX-CPU Series User manual
Omron
Omron NJ501 series Instruction Manual
Omron
Omron E5CN-HT User manual
Omron
Omron NV3W-MR20L-V1 User manual
Omron
Omron MC3 Series User manual
Omron
Omron CJ Series Instruction Manual
Omron
Omron SYSMAC C2000H User manual
Omron
Omron E5ED-8 Series User manual
Omron
Omron E5EK-T User manual
Omron
Omron Sysmac NJ-series User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
