Omron NJ-series Use and care manual

Machine Automation Controller

NJ/NX-series

Firmware Update Instruction

with Memory Cards

P161-E1-01

NX701-

NX502-

NX102-

NX1P2-

NJ501-

NJ301-1

NJ101-

any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior

written permission of OMRON.

2. No patent liability is assumed with respect to the use of the information contained herein.

Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained

in this manual is subject to change without notice.

3. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsi-

bility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in this publication.

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other

countries for OMRON factory automation products.

• Microsoft, Windows, Excel, Visual Basic, and Microsoft Edge are either registered trademarks or trademarks of

Microsoft Corporation in the United States and other countries.

• EtherCAT®is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

• ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.

• The SD and SDHC logos are trademarks of SD-3C, LLC.

Other company names and product names in this document are the trademarks or registered trademarks of their

respective companies.

Trademarks

Copyrights

NOTE

• Microsoft product screen shots used with permission from Microsoft.

• This product incorporates certain third party software. The license and copyright information associated with this

software is available at http://www.fa.omron.co.jp/nj_info_e/.

Introduction

Thank you for purchasing NJ/NX-series products.

This manual contains information that is necessary to update the firmware of NJ/NX-series products.

Please read this manual and make sure you understand the firmware update before you attempt to

use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and maintaining FA systems.

• Personnel in charge of managing FA systems and facilities.

For programming, this manual is intended for personnel who understand the programming language

specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Applicable Products

This manual covers the following products.

•NX-series CPU Units

•NX701-£7££

•NX701-£6££

•NX502-15££

•NX502-14££

•NX502-13££

•NX102-12££

•NX102-11££

•NX102-10££

•NX102-90££

•NX1P2-11££££

•NX1P2-11££££1

•NX1P2-10££££

•NX1P2-10££££1

•NX1P2-90££££

•NX1P2-90££££1

•NX1P2-9B££££

•NX1P2-9B££££1

•NJ-series CPU Units

•NJ501-£5££

•NJ501-£4££

•NJ501-£3££

•NJ301-12££

•NJ301-11££

•NJ101-10££

•NJ101-90££

Introduction

NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Manual Structure

Page Structure

The following page structure is used in this manual.

4-9

4 Installation and Wiring

NJ-series CPU Unit Hardware User’s Manual (W500)

gnitn

3-4

rel

noC

4-3 Mounting Units

The Units that make up an NJ-series Controller can be connected simply by pressing the Units together

and locking the sliders by moving them toward the back of the Units. The End Cover is connected in the

same way to the Unit on the far right side of the Controller.

1Join the Units so that the connectors fit exactly.

2The yellow sliders at the top and bottom of each Unit lock the Units together. Move the sliders

toward the back of the Units as shown below until they click into place.

Precautions for Correct UsePrecautions for Correct Use

4-3-1 Connecting Controller Components

Connector

Hook Hook holes

Slider

Lock

Release

Move the sliders toward the back

until they lock into place.

Level 1 heading

Level 2 heading

Level 3 heading

Level 2 heading

A step in a procedure

Manual name

Special information

Level 3 heading

Page tab

Gives the current

headings.

Indicates a procedure.

Icons indicate

precautions, additional

information, or reference

information.

Gives the number

of the main section.

This illustration is provided only as a sample. It may not literally appear in this manual.

The sliders on the tops and bottoms of the Power Supply Unit, CPU Unit, I/O Units, Special I/O

Units, and CPU Bus Units must be completely locked (until they click into place) after connecting

the adjacent Unit connectors.

Manual Structure

2NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Special Information

Special information in this manual is classified as follows:

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Version Information

Information on differences in specifications and functionality for Controller with different unit versions

and for different versions of the Sysmac Studio is given.

Manual Structure

NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Manual Structure

4NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Sections in this Manual

NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Restrictions on Firmware Update

Performing Firmware Update

Appendices

Troubleshooting

CONTENTS

Introduction .............................................................................................................. 1

Intended Audience...........................................................................................................................................1

Applicable Products .........................................................................................................................................1

Manual Structure...................................................................................................... 2

Page Structure.................................................................................................................................................2

Special Information ..........................................................................................................................................3

Sections in this Manual ........................................................................................... 5

Terms and Conditions Agreement.......................................................................... 8

Warranty, Limitations of Liability ......................................................................................................................8

Application Considerations ..............................................................................................................................9

Disclaimers ......................................................................................................................................................9

Statement of security responsibilities for assumed use cases and against threats.......................................10

Safety Precautions................................................................................................. 11

Precautions for Safe Use ...................................................................................... 12

Precautions for Correct Use ................................................................................. 14

Regulations and Standards .................................................................................. 16

Versions .................................................................................................................. 17

Related Manuals..................................................................................................... 18

Terminology............................................................................................................ 20

Revision History..................................................................................................... 21

Section 1 Restrictions on Firmware Update

1-1 Restrictions ............................................................................................................................1-2

Section 2 Performing Firmware Update

2-1 Procedures to Perform Firmware Update............................................................................2-2

2-2 Operation Status Indicators..................................................................................................2-6

Section 3 Troubleshooting

3-1 Troubleshooting during Firmware Update ..........................................................................3-2

Appendices

A-1 Formatting SD Memory Cards ............................................................................................. A-2

CONTENTS

6NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

A-2 Displaying Firmware Update Log ........................................................................................ A-3

CONTENTS

NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Terms and Conditions Agreement

Warranty, Limitations of Liability

Warranties

Exclusive Warranty

Omron’s exclusive warranty is that the Products will be free from defects in materials and work-

manship for a period of twelve months from the date of sale by Omron (or such other period ex-

pressed in writing by Omron). Omron disclaims all other warranties, express or implied.

Limitations

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF

THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based

on infringement by the Products or otherwise of any intellectual property right.

Buyer Remedy

Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally

shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-

plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal

to the purchase price of the non-complying Product; provided that in no event shall Omron be re-

sponsible for warranty, repair, indemnity or any other claims or expenses regarding the Products

unless Omron’s analysis confirms that the Products were properly handled, stored, installed and

maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return

of any Products by Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the use of Products in

combination with any electrical or electronic components, circuits, system assemblies or any other

materials or substances or environments. Any advice, recommendations or information given orally

or in writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

Terms and Conditions Agreement

8NJ/NX-series Firmware Update Instruction with Memory Cards (P161)

Other manuals for NJ-series

This manual suits for next models

Table of contents

Other Omron Controllers manuals

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual