Omron SYSMAC CJ1W-EIP21 Installation manual

Machine Automation Controller

CJ-series

EtherNet/IPTM Units

EtherNet/IP Units

Operation Manual

for NJ-series CPU Unit

W495-E1-05

CJ1W-EIP21

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is

constantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

OMRON, 2012

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other

countries for OMRON factory automation products.

• Windows, Windows 98, Windows XP, Windows Vista, and Windows 7 are registered trademarks of Microsoft

Corporation in the USA and other countries.

• EtherCAT®is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

• ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.

• The SD logo is a trademark of SD-3C, LLC.

Other company names and product names in this document are the trademarks or registered trademarks of their

respective companies.

Trademarks

Introduction

CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Introduction

Thank you for purchasing an EtherNet/IP Unit.

This manual contains information that is necessary to use the EtherNet/IP Unit. Please read this man-

ual and make sure you understand the functionality and performance of the NJ-series CPU Unit before

you attempt to use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

•Personnel in charge of introducing FA systems.

•Personnel in charge of designing FA systems.

•Personnel in charge of installing and maintaining FA systems.

•Personnel in charge of managing FA systems and facilities.

For programming, this manual is intended for personnel who understand the programming language

specifications in international standard IEC 61131-3 or Japanese standard JIS B3503.

This manual covers the following products.

•CJ-series EtherNet/IP Unit

•CJ1W-EIP21

This manual contains information that is necessary to use a CJ1W-EIP21 EtherNet/IP Unit that is con-

nected to an NJ-series CPU Unit. Use a CJ1W-EIP21 EtherNet/IP Unit with unit version 2.1 or later for

an NJ-series CPU Unit. Also use a CPU Unit with unit version 1.01 or later and Sysmac Studio version

1.02 or higher.

Intended Audience

Applicable Products

Relevant Manuals

2CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Relevant Manuals

There are three manuals that provide basic information on the NJ-series CPU Units: the NJ-series CPU

Unit Hardware User’s Manual, the NJ-series CPU Unit Software User’s Manual, and the NJ-series

Instructions Reference Manual.

Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac Stu-

dio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.

Other manuals are necessary for specific system configurations and applications.

Read all of the manuals that are relevant to your system configuration and application to make the most

of the NJ-series CPU Unit.

Purpose of use

Manual

NJ Series NX Series

Basic information

NJ-series CPU Unit

Hardware User’s Manual

NJ-series CPU Unit

Software User’s Manual

NJ-series Instructions

Reference Manual

NJ-series CPU Unit Motion

Control User’s Manual

NJ-series CPU Unit Built-in

EtherCAT Port User’s Manual

NJ-series Motion Control

Instructions Reference Manual

NJ-series CPU Unit Built-in

EtherNet/IP Port User’s Manual

NJ-series Database Connection

CPU Unit User’s Manual

NJ-series Troubleshooting

Manual

NX-series EtherCAT Coupler Unit

User’s Manual

NX-series NX Units

User’s Manuals

NX-series Data

Reference Manual

CJ-series Special Unit Operation

Manuals for NJ-series CPU Unit

Introduction to NJ-series Controllers ●

Setting devices and hardware ●

Using motion control ●●

Using EtherCAT ●

Using EtherNet/IP ●

Using the database connection ser-

vice

●

Using the NX Series ●●●

Using CJ-series Units ●

Software settings ●

Using motion control ●●

Using EtherCAT ●

Using EtherNet/IP ●

Using the database connection ser-

vice

●

Using the NX Series ●●●

Writing the user program ●●

Using motion control ●● ●

Using EtherCAT ●

Using the database connection ser-

vice

●

Using the NX Series ●●

Using CJ-series Units ●

Programming error processing ●

Testing operation and debugging ●

Using motion control ●●

Using EtherCAT ●

Using EtherNet/IP ●

Using the database connection ser-

vice

●

Using the NX Series ●●

Relevant Manuals

CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

*1 The NJ-series Troubleshooting Manual introduces the error management concepts and error items. Refer to the manuals

that are indicated with triangles for details on errors for the corresponding Units.

Learning about error management and

corrections*1

▲▲ ▲▲ ▲▲●▲▲ ▲

Maintenance ●

Using motion control ●●

Using EtherCAT ●

Using EtherNet/IP ●

Using the NX Series ●●

Using CJ-series Units ●

Purpose of use

Manual

NJ Series NX Series

Basic information

NJ-series CPU Unit

Hardware User’s Manual

NJ-series CPU Unit

Software User’s Manual

NJ-series Instructions

Reference Manual

NJ-series CPU Unit Motion

Control User’s Manual

NJ-series CPU Unit Built-in

EtherCAT Port User’s Manual

NJ-series Motion Control

Instructions Reference Manual

NJ-series CPU Unit Built-in

EtherNet/IP Port User’s Manual

NJ-series Database Connection

CPU Unit User’s Manual

NJ-series Troubleshooting

Manual

NX-series EtherCAT Coupler Unit

User’s Manual

NX-series NX Units

User’s Manuals

NX-series Data

Reference Manual

CJ-series Special Unit Operation

Manuals for NJ-series CPU Unit

Manual Structure

4CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Manual Structure

The following page structure is used in this manual.

Page Structure

4-9

4 Installation and Wiring

NJ-series CPU Unit Hardware User’s Manual (W500)

stinUgnitnuoM3-4

stnenopmoCrellortnoCgnitcennoC1-3-4

4-3 MountingUnits

The Units that make up an NJ-series Controller can be connected simply by pressing the Units together

and locking the sliders by moving them toward the back of the Units. The End Cover is connected in the

same way to the Unit on the far right side of the Controller.

1Join the Units so that the connectors fit exactly.

2The yellowsliders at the top and bottom of each Unit lock the Units together. Move the sliders

toward the back of the Units as shown belowuntil they click into place.

Precautions for Correct UsePrecautions for Correct Use

4-3-1 ConnectingController Components

Connector

Hook Hook holes

Slider

Lock

Release

Move the sliders toward the back

until they lock into place.

Level 1 heading

Level 2 heading

Level 3 heading

Level 2 heading

A step in a procedure

Manual name

Special information

Level 3 heading

Page tab

Gives the current

headings.

Indicates a procedure.

Icons indicate

precautions, additional

information, or reference

information.

Gives the number

of the main section.

This illustration is provided only as a sample. It may not literally appear in this manual.

The sliders on the tops and bottoms of the Power Supply Unit, CPU Unit, I/O Units, Special I/O

Units, and CPU Bus Units must be completely locked (until they click into place) after connecting

the adjacent Unit connectors.

Manual Structure

CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Special information in this manual is classified as follows:

Note References are provided to more detailed or related information.

In this manual, “download” refers to transferring data from the Sysmac Studio to the physical Controller

and “upload” refers to transferring data from the physical Controller to the Sysmac Studio.

For the Sysmac Studio, synchronization is used to both upload and download data. Here, “synchronize”

means to automatically compare the data for the Sysmac Studio on the computer with the data in the

physical Controller and transfer the data in the direction that is specified by the user.

Special Information

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Version Information

Information on differences in specifications and functionality for CPU Units with different unit versions

and for different versions of the Sysmac Studio is given.

Precaution on Terminology

Manual Structure

6CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Sections in this Manual

CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Sections in this Manual

Determining

IP Addresses

Assigning Device Vari-

ables for CJ-series Units

Sysmac Studio Settings

for the EtherNet/IP Unit

Testing Communications

Tag Data Link Functions

Message Communications

FTP Server

Automatic Clock

Adjustment

SNMP Agent

Communications Per-

formance and Commu-

nications Load

Troubleshooting

Appendices

Index

Introduction

Installing Ethernet

Networks

Sections in this Manual

8CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)

Other manuals for SYSMAC CJ1W-EIP21

Table of contents

Other Omron Controllers manuals

Omron

Omron C200HX-CPU Series User manual

Omron

Omron SYSMAC CS1W-EIP21 User manual

Omron

Omron NX1P Owner's manual

Omron

Omron E5EN User manual

Omron

Omron NJ-series User manual

Omron

Omron PROFINET IO CJ1W-PRM21 User manual

Omron

Omron CJ1W-SCU32 User manual

Omron

Omron CQM1H - PROGRAM Owner's manual

Omron

Omron E5CC-U-800 User manual

Omron

Omron C200HS Series Parts list manual

Omron

Omron C200HS Series Parts list manual

Omron

Omron V600 Series User manual

Omron

Omron E5GN User manual

Omron

Omron SYSMAC CPM1 User manual

Omron

Omron F3SX-E-D1RR User manual

Omron

Omron R88D-GN Series User manual

Omron

Omron F3SX-N-L1D1RR2 User manual

Omron

Omron SYSMAC CS1W-CLK13 User manual

Omron

Omron R88M-1M Series User manual

Omron

Omron SYSMAC C20P User manual

Omron

Omron CS Series User manual

Omron

Omron NX102 series User manual

Omron

Omron SYSMAC CS Series User manual

Omron

Omron NJ-series Instruction Manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual