NXP Semiconductors I.MX31 User manual

i.MX31 3-Stack

Development Kit

Quick Start Guide

for Linux

3StackQS_Linuxbeta.book Page 1 Wednesday, January 16, 2008 1:58 PM

Information in this document is provided solely to enable system and software implementers to use Freescale Semicon-

ductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any inte-

grated circuits or integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale

Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any partic-

ular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product

or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental dam-

ages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and

do vary in different applications and actual performance may vary over time. All operating parameters, including “Typ-

icals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does

not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not de-

signed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semi-

conductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use

Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold

Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of

personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale

Semiconductor was negligent regarding the design or manufacture of the part.

Federal Communications Commission Radio Frequency Interference Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that might cause undesired operation.

Changes or modifications to this equipment not expressly approved by Freescale could void the user’s authority to

operate the equipment.

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names

are the property of their respective owners.

How to Reach Us:

Home Page:

www.freescale.com

E-mail:

[email protected]

USA/Europe or Locations Not Listed:

Freescale Semiconductor

Technical Information Center, CH370

1300 N. Alma School Road

Chandler, Arizona 85224

+1-800-521-6274 or +1-480-768-2130

[email protected]

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

[email protected]

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku,

Tokyo 153-0064, Japan

0120 191014 or +81 3 5437 9125

support.japan@freescale.com

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.

Technical Information Center

2 Dai King Street

Tai Po Industrial Estate

Tai Po, N.T., Hong Kong

+800 2666 8080

support.asia@freescale.com

For Literature Requests Only:

Freescale Semiconductor Literature Distribution

Center

P.O. Box 5405

Denver, Colorado 80217

1-800-521-6274 or 303-675-2140

Fax: 303-675-2150

LDCForFreescaleSemiconductor@hibbertgroup.com

3StackQS_Linuxbeta.book Page 2 Wednesday, January 16, 2008 1:58 PM

i.MX31 3-Stack Quick Start Guide for Linux

1 About the Boards 3

About the 3-Stack Platform System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

CPU Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Debug Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Personality Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2 Getting Started 13

Unpack the Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CD-ROM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Provide a Development PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3 Build the Platform 17

Build a Development Platform: Assemble 3 Boards . . . . . . . . . . . . . . . . . . . . .17

Connect Personality Board to Debug Board . . . . . . . . . . . . . . . . . . . . . . . . .18

Connect CPU Board to Debug Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Connect Development Platform to PC; Run Preloaded Image . . . . . . . . . . . 20

Build a Demo Platform: Assemble 2 Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connect CPU Board to Personality Board . . . . . . . . . . . . . . . . . . . . . . . . . .22

Connect Power Supply; Run Preloaded Demo . . . . . . . . . . . . . . . . . . . . . . . 23

4 Using the Linux Demo Image 25

Linux Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Multimedia Applications Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Connectivity Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Downloading Multimedia to the 3-Stack Board. . . . . . . . . . . . . . . . . . . . . . . . . 26

Using an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Using a USB Mass Storage Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3StackQS_Linuxbeta.book Page 1 Wednesday, January 16, 2008 1:58 PM

i.MX31 3-Stack Quick Start Guide for Linux

Running the Video, Audio, and Picture Applications. . . . . . . . . . . . . . . . . . . . .29

Running the Video Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Running the Audio Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Running the Picture Viewer Application. . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Running the Camera Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Running the FM Radio Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Supported Codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Ready to Begin Your Development?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

3StackQS_Linuxbeta.book Page 2 Wednesday, January 16, 2008 1:58 PM

i.MX31 3-Stack Quick Start Guide for Linux

About the Boards

This chapter provides detailed information about the three boards (CPU, Debug,

Personality) and identifies the locations of the connectors and switches.

About the 3-Stack Platform System

Freescale introduces the 3-Stack Platform System, which you use to develop multimedia

and connectivity applications using the i.M31 Applications Processor and the MC13783

Audio and Power Management device.

The 3-Stack Platform System decreases the time between first development and final

product release by providing you (as the system designer) with a near-to-final product

design, which you can use as a development platform for software and hardware.

There are two Board Support Packages (BSP) for the 3-Stack Platform System, with one

BSP for WinCE and one BSP for Linux operating systems. These BSPs contain drivers

optimized for multimedia operations using the i.MX31 and MC13783 devices.

Freescale's 3-Stack Platform System consists of three small boards: CPU, Debug, and

Personality.

• A CPU board contains the i.MX31 CPU, memories and the MC13783 Power

Management IC (PMIC).

• A Debug board provides the debug interfaces (like JTAG), and also has a CPLD that

implements an external Ethernet and serial controller for debug purposes.

• The Personality board implements the functionality of the 3-Stack board system, and

contains hardware for WiFi connectivity, FM receiver, and so on. The Personality

board can be modified to meet your specific requirements without the need to modify

the other two boards (CPU, Debug). The Personality board was designed to support

common multimedia applications, and has a 2.8-inch VGA display, image sensor

Table 1.1 Chapter Summary

Board See

3-Stack Platform “About the 3-Stack Platform System” on page 3

CPU “CPU Board” on page 6

Debug “Debug Board” on page 7

Personality “Personality Board” on page 10

3StackQS_Linuxbeta.book Page 3 Wednesday, January 16, 2008 1:58 PM

About the Boards

About the 3-Stack Platform System

4i.MX31 3-Stack Quick Start Guide for Linux

camera, WiFi 802.11g/b, FM receiver, SD Card connector, USB OTG, USB Host,

2.4 QVGA smart display panel connector, ATA connector and TV-Out connector.

As the 3-Stack Platform continues to evolve, more Personality boards will be created

to meet new multimedia requirements.

Table 1.2 describes the 3-Stack Platform features in detail.

Table 1.2 3-Stack Platform Features

Item Description

All boards • Near to final product form-factor demonstration

modules and working platforms.

• Solid reference schematics that closely resemble

final products to aid customers' designs.

CPU board • i.MX31 ARM-11 Applications Processor

• MC13783 Atlas power management chip

• 256 MB of NAND Flash Memory

• 128 MB of 32 bit DDR SDRAM memory

• 37.914 mm x 67.517 mm

Personality board • Peripheral components

• Interface connectors

• 71.428 mm x 129.462 mm

Debug board • Two RS-232 interfaces

• 10/100 Base-T Ethernet connector

• Current measure connectors

• 71.400 mm x 174.900 mm

Expansion Headers • Utilizing reliable high density connector to interface

between boards, 3 board assembly for software

development and 2-board assembly (without debug

board) for demonstration

Battery Support • +4.2 V 2400mAh Battery power supply and Battery

Charging Function

LCD Display • 2.8 inch TFTLCD display panel with touch panel and

LED backlight

Smart LCD Connector • 2.4 inch QVGA smart display panel connector

Camera Interface • Image sensor camera connector

Selectable Clock

Sources

• Two selectable system clock sources: 32.768 KHz

and 26 Mhz

Debug Port • RealView-ICE debug support

3StackQS_Linuxbeta.book Page 4 Wednesday, January 16, 2008 1:58 PM

About the Boards

About the 3-Stack Platform System

i.MX31 3-Stack Quick Start Guide for Linux

Video and Audio

Stereo

• Stereo microphone jack, headphone and video jack,

stereo and mono (ear piece) speaker terminals

GPS Connector • One connector to outboard GPS module

FM Receiver

TV Out • TV decoder that supports 8-bit color, NTSC and PAL

formats

PC Card Expansion • SD card connectors, with card sense

Keypad • Onboard keypad and keypad connector

Network Support • WiFi 802.11g/b and BT2.0 + EDR Combo Module

onboard

• One Ethernet jack connector (for application/debug)

USB • One USB OTG high-speed transceiver with mini-

USB connector

• One USB high-speed host transceiver, with

standard USB host connector

ATA Support ATA5 controller with

• One 44-position dual row 2 mm header for small

form-factor disk drivers

• One 40-pin ZIF connector for Toshiba HDD

Accelerometer • Onboard accelerometer with sensitivity in three

separate axes (X, Y, Z)

Serial Port Two RS-232 interfaces with DB-9 connectors

• One RS-232 interface is driven by a UART channel

internal to the MX31, and it supports DCE with

optional full modem controls

• The other RS-232 interface is DTE with optional full

modem controls

Cables • 5.0V/2.4A universal power supply kit

• RS-232 standard serial cable

• High Speed USB cables with mini-AB connectors for

OTG

• High speed cable with standard A-to-mini-B

connectors

• Mini-USB adaptor

• Ethernet cables (2) with RJ45-8 connectors

Table 1.2 3-Stack Platform Features

Item Description

3StackQS_Linuxbeta.book Page 5 Wednesday, January 16, 2008 1:58 PM

About the Boards

CPU Board

6i.MX31 3-Stack Quick Start Guide for Linux

CPU Board

Figure 1.1 CPU Board

You use the J1 board-to-board connector (500 pins) to connect the CPU board to either of

the other two boards:

• Connect the CPU board to a Personality board, for running demos (no Debug board

is needed).

• Connect the CPU board to a Debug board, (and connect the Personality board to the

Debug board) for developing software. The Personality board plugs into the other

side of the Debug board.

Software • Sample Windows® embedded CE binary image

from Freescale

• Windows embedded CE BSP available from

Freescale

Application

Development Tools

• ATK software

• Platform Builder 5.0/6.0

• Visual Studio 2005

Table 1.2 3-Stack Platform Features

Item Description

J1 Board-to-Board Connector

CPU

Board Top

Bottom

3StackQS_Linuxbeta.book Page 6 Wednesday, January 16, 2008 1:58 PM

About the Boards

Debug Board

i.MX31 3-Stack Quick Start Guide for Linux

Debug Board

Figure 1.2 Debug Board

To Personality Board

Connector CN74

Current Measure J3

MX31 JTAG CN1

SW5–SW10 See Table 1.5

3.3V LED D9

Power-On S4

DC Power LED D11

DC Power J2

Ethernet J1

UART CON4

female

UART CON3

male

Debug CPLD

JTAG CN2

Personality

CPLD JTAG

CN3

CPLD Test

Debug Reset S2

CPLD Test

Power S1

System Reset

CPLD LEDs D1–D8

SW4 See Table 1.4

Debug

Board

TOP

Bottom

Resettable Fuse F1

To CPU Board Connector

3StackQS_Linuxbeta.book Page 7 Wednesday, January 16, 2008 1:58 PM

About the Boards

Debug Board

8i.MX31 3-Stack Quick Start Guide for Linux

Table 1.3 Debug Board Physical Features

Type Physical Feature

Switches • S1: Power button

• S2: Debug board reset button

• S3: System reset switch

• S4: Power-on switch

• SW4: Enable switch

Connectors • J1:10/100 Base-T Ethernet RJ45 connector

• J2: 5.0V DC power connector

• J3: Current measure connector

• J4: 500-pin connector to CPU board

• P1: WEIM Address measure connector

• P2: WEIM Data measure connector

• CN1: i.MX31 JTAG connector

• CN2: Debug board CPLD JTAG connector

• CN3: Personality board CPLD JTAG connector (Reserved)

• CN74: 500-pin connector to Personality board

• CON4: UART (DCE) DB9 female connector

LEDs • D1–D8: LEDs for CPLD debug

• D9: LED for debug board 3.3V power

• D11:LED for DC power supply

Buttons • BT1, BT2: Test buttons for CPLD

Fuse • F1: Resettable Fuse

3StackQS_Linuxbeta.book Page 8 Wednesday, January 16, 2008 1:58 PM

Table of contents

Other NXP Semiconductors Microcontroller manuals

NXP Semiconductors

NXP Semiconductors MKW36Z512xxx4 Series User manual

NXP Semiconductors

NXP Semiconductors S12ZVMAEVB User manual

NXP Semiconductors

NXP Semiconductors freescale Kinetis TWR-KV10Z32 User manual

NXP Semiconductors

NXP Semiconductors ColdFire MCF52235 User manual

NXP Semiconductors

NXP Semiconductors SLN-LOCAL2-IOT User manual

NXP Semiconductors

NXP Semiconductors FRDM665SPIEVB User manual

NXP Semiconductors

NXP Semiconductors S32K1 Series Instruction Manual

NXP Semiconductors

NXP Semiconductors MTRCKTSPS5744P User manual

NXP Semiconductors

NXP Semiconductors MC68HC16Z1 User manual

NXP Semiconductors

NXP Semiconductors LPC800 User manual

NXP Semiconductors

NXP Semiconductors JN517x-DK005 User manual

NXP Semiconductors

NXP Semiconductors Freescale TWR-POS-K81 User manual

NXP Semiconductors

NXP Semiconductors OM-SE051ARD User manual

NXP Semiconductors

NXP Semiconductors MKL27Z128VFM4 User manual

NXP Semiconductors

NXP Semiconductors SAFE ASSURE Qorivva MPC5602P User manual

NXP Semiconductors

NXP Semiconductors MPC5777C User manual

NXP Semiconductors

NXP Semiconductors MCUXpresso SDK User manual

NXP Semiconductors

NXP Semiconductors UM11733 User manual

NXP Semiconductors

NXP Semiconductors FRDM-KW24D512 User manual

NXP Semiconductors

NXP Semiconductors LPC5500 Series User manual

NXP Semiconductors

NXP Semiconductors S32R27 Guide

NXP Semiconductors

NXP Semiconductors JN5189-DK006 User manual

NXP Semiconductors

NXP Semiconductors IOTZTB-DK006 User manual

NXP Semiconductors

NXP Semiconductors KL25 Series User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide

NXP Semiconductors i.MX31 User manual

Popular Microcontroller manuals by other brands