NXP Semiconductors i.MX 8M User manual
AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
Rev. 1.1 — 7 December 2020 Application note
Document information
Information Content
Keywords EdgeLock SE05x, Plug & Trust middleware, i.MX 8M
Abstract This document explains how to get started with the EdgeLock SE05x Plug &
Trust middleware using the EdgeLock SE05x development boards and i.MX
8M board. It provides detailed instructions for connecting the boards, installing
the software, running the EdgeLock SE05x Plug & Trust project examples and
executing the ssscli tool
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
Revision history
Revision number Date Description
1.0 2020-10-21 First document release.
1.1 2020-12-07 Updated to latest template and fixed broken links
Revision history
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
2 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
1 How to use this document
The Plug & Trust middleware includes a set of project examples that demonstrate the use
of EdgeLock SE05x product family in the latest IoT security use cases. This document
provides detailed instructions to run project examples for EdgeLock SE05x in i.MX 8M
board. The main body of this document should be used in this sequence:
1. Order board samples. Section 2 contains the ordering details of the demo boards
required in this document;
2. Prepare the hardware. Section 3 describes how to setup the OM-SE05xARD and i.MX
8M boards.
3. Flash the microSD card image. Section 4 describes how to create a micro-SD card
with the Linux image with the pre-installed Plug & Trust middleware.
4. Run project examples. Section 5 describes how to run EdgeLock SE05x included in
Plug & Trust middleware.
Supplementary material is provided in the appendices.
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
3 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
2 Hardware required
The EdgeLock SE05x works as an auxiliary security device attached to a host controller,
communicating with through an I²C interface. To follow the instructions provided in this
document, you need an EdgeLock SE05x development board and a i.MX 8M MCU
board, acting as a host controller.
EdgeLock SE05x development boards ordering details
The EdgeLock SE05x support package provides development boards for evaluating
EdgeLock SE050 and EdgeLock SE051 features. Select the development board of the
product you want to evaluate. Table 1 details the ordering details of the EdgeLock SE05x
development boards.
Part number 12NC Description Picture
OM-SE050ARD 935383282598 SE050 Arduino®
compatible
development kit
OM-SE051ARD 935399187598 SE051 Arduino®
compatible
development kit
Table 1. EdgeLock SE05x development boards.
Note: The pictures in this guide will show OM-SE050ARD, but OM-SE051ARD can be
used as well with the same configuration.
i.MX 8M MCU board ordering details
Table 2 details the ordering details for the i.MX 8M board.
Part number 12NC Content Picture
MCIMX8M-EVK 935378743598 i.MX 8M evaluation kit
Table 2. i.MX 8M development kit details
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
4 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
3 Boards setup
This section explains how to prepare the OM-SE05xARD boards and i.MX 8M board to
run the EdgeLock SE05x Plug & Trust middleware project examples. Follow these steps:
1. Connect the OM-SE05xARD to the i.MX 8M board. The i.MX 8M board does not
come with an Arduino connector, so you have to connect the Arduino shield of the
OM-SE05xARD board to the J801_I2C connector of the i.MX 8M board using wires.
Table 3 details the jumper connection
OM-SE05xARD (# jumper - #
pin)
I.MX 8M (# jumper - # pin) Description
J2 - Pin 10 J801 - Pin 1 SCL
J2 - Pin 7 J801 - Pin 2 Ground
J2 - Pin 9 J801 - Pin 3 SDA
J8 - Pin 3 J801 - Pin 5 3.3 Volt supply
Table 3. Wire connection OM-SE05xARD - i.MX 8M
and Figure 1 illustrate the wiring between boards.
Figure 1. Connection between OM-SE05xARD and i.MX 8M boards
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
5 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
2. Make sure the jumper settings in your OM-SE05xARD board are configured as shown
in Figure 2:
Figure 2. Jumper configuration for i.MX 8M board
Note: For more information about the jumper settings, refer to AN12395 (OM-
SE05xARD) and AN13016 (OM-SE051ARD) respectively.
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
6 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
4 Software setup
The software setup consists of:
1. Preparing a micro-SD card with the pre-compiled Linux image with the preinstalled
Plug & Trust middleware for i.MX 8M board, as described in Section 4.1.
2. Installing the USB to UART Bridge VCOM driver in your laptop, as described in
Section 4.2.
3. Installing TeraTerm terminal application, as described in Section 4.3.
4. Booting the i.MX 8M board, as described in Section 4.4.
4.1 Micro-SD card preparation
To prepare the micro-sd card with the pre-compiled Linux image that includes the Plug &
Trust middleware, you need to:
1. Download from NXP website the Plug & Trust middleware SD Card Image. This
image contains the Plug & Trust middleware pre-installed with already some
examples on a bootable SD Card Image.
Note: In case the image provided by NXP does not suit your use case, you can
find the explanation of how to create an card image using Yocto in the Plug & Trust
middleware documentation (simw-top/doc/dev-platforms/platform_imx8_linux.html) .
2. Download and install Win32 Disk Imager software. Win32 Disk Imager is a Windows
open source program to format SD card images. Instead of Win 32 Disk Imager, you
could also use any other software for this operation.
3. Plug your micro-SD card in your laptop.
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
7 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
4. Open Win32 Disk Imager, (1) select from your file system the pre-compiled Linux
image you downloaded from the website, and (2) click on the Write button as shown
in Figure 3.
Note: the SD card image might come in a ZIP package. Make sure to unzip the
package and change the extension to .img before selecting the image file in Win32
Disk Imager.
Figure 3. Micro-SD card preparation with Win32 Disk Imager software
4.2 Drivers
To install the i.MX 8M drivers, follow these steps:
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
8 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
1. Plug the power supply and connect the USB cable to your laptop as shown in
Figure 4.
Figure 4. Plug the power supply and connect the USB cable to your laptop
2. Download the USB to UART Bridge VCOM driver for your processor (either 32 or 64
bits). Install the driver by following the setup wizard until it is finished.
3. Unplug and plug your board.
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
9 / 26
NXP Semiconductors AN13027
EdgeLockTM SE05x Quick start guide with i.MX 8M
4. Go to your Device Manager, and check that your board is recognized and assigned
to a port number (COMxx). Write down the assigned port number (COMxx) as it is
needed in the next steps. Your Device Manager should look like Figure 5.
Note: if you see more than one COM port, use the one denoted as Enhanced COM
port.
Figure 5. Check that i.MX 8M board is recognized in Device Manager
4.3 Terminal setup
We need to install a terminal application, for instance TeraTerm, to communicate
and view the serial output of the i.MX 8M board from our laptop. To setup TeraTerm
application:
1. Download TeraTerm and run the installer.
2. Launch TeraTerm, click the Serial option and select from the dropdown list the
Enhanced COM port number assigned to your i.MX 8M board (In this case COM11)
as shown in Figure 6. Click the OK button to confirm the setup. If you cannot see the
AN13027 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
Application note Rev. 1.1 — 7 December 2020
10 / 26
Other manuals for i.MX 8M
5
This manual suits for next models
4
Table of contents
Other NXP Semiconductors Microcontroller manuals
NXP Semiconductors
NXP Semiconductors S32R274RRUEVB User manual
NXP Semiconductors
NXP Semiconductors EasyEVSE EV User manual
NXP Semiconductors
NXP Semiconductors Freescale 56800TDC User manual
NXP Semiconductors
NXP Semiconductors LPC43Sxx User manual
NXP Semiconductors
NXP Semiconductors K32W User manual
NXP Semiconductors
NXP Semiconductors MPC5748G Low Cost EVB User manual
NXP Semiconductors
NXP Semiconductors i.MX 8M PLUS EVK User manual
NXP Semiconductors
NXP Semiconductors MPC5606BK User manual
NXP Semiconductors
NXP Semiconductors MKW36Z512xxx4 Series User manual
NXP Semiconductors
NXP Semiconductors MC9S12XS256 User manual
NXP Semiconductors
NXP Semiconductors S12VR32EVB User manual
NXP Semiconductors
NXP Semiconductors MPC5606S User manual
NXP Semiconductors
NXP Semiconductors freescale KV4 Series User manual
NXP Semiconductors
NXP Semiconductors UM10574 User manual
NXP Semiconductors
NXP Semiconductors Harpoon User manual
NXP Semiconductors
NXP Semiconductors MTRCKTSPS5744P User manual
NXP Semiconductors
NXP Semiconductors LPC5410x User manual
NXP Semiconductors
NXP Semiconductors MRF101AN User manual
NXP Semiconductors
NXP Semiconductors TWR-K60N512-IAR User manual
NXP Semiconductors
NXP Semiconductors OM2385 User manual
Popular Microcontroller manuals by other brands
AMS
AMS AS7261 Demo Kit user guide
Novatek
Novatek NT6861 manual
Espressif Systems
Espressif Systems ESP8266 SDK AT Instruction Set
Nuvoton
Nuvoton ISD61S00 ChipCorder Design guide
STMicrolectronics
STMicrolectronics ST7 Assembler Linker user manual
Texas Instruments
Texas Instruments Chipcon CC2420DK user manual
Texas Instruments
Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual
CYPRES
CYPRES CY14NVSRAMKIT-001 user guide
Texas Instruments
Texas Instruments INA-DUAL-2AMP-EVM user guide
Espressif Systems
Espressif Systems ESP8266EX Programming guide
Abov
Abov AC33M8128L user manual
Laird
Laird BL654PA user guide