MSI MS-6567 User manual

MSI

Version 1.0

G52-MA00545

MS-6567 (v1.X) ATX Mainboard

645E Max2 Series

MICRO-STAR INTERNATIONAL

MS6567_Preface_uk.p65 07.05.2002, 15:291

Manual Rev: 1.0

Release Date: Mar. 2002

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

Micro-Star International MS-6567

Tested to comply

with FCC Standard

For Home or Office Use

MS6567_Preface_uk.p65 07.05.2002, 15:292

iii

Edition

Mar. 2002

The material in this document is the intellectual property of MICRO-STAR

INTERNATIONAL. We take every care in the preparation of this document,

but no guarantee is given as to the correctness of its contents. Our products

are under continual improvement and we reserve the right to make changes

without notice.

Trademarks

All trademarks are the properties of their respective owners.

Intel®and Pentium®are registered trademarks of Intel Corporation.

PS/2 and OS®/2 are registered trademarks of International Business Machines

Corporation.

Windows®95/98/2000/NT/ME/XP are registered trademarks of Microsoft

Corporation.

Netware®is a registered trademark of Novell, Inc.

Award®is a registered trademark of Phoenix Technologies Ltd.

AMI®is a registered trademark of American Megatrends Inc.

Revision History

Revision Revision History Date

1.0 First Release Mar. 2002

MS6567_Preface_uk.p65 07.05.2002, 15:293

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electri-

cal shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

zThe power cord or plug is damaged

zLiquid has penetrated into the equipment

zThe equipment has been exposed to moisture

zThe equipment has not work well or you can not get it work according

to User’s Manual.

zThe equipment has dropped and damaged

zIf the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGETEMPERATUREABOVE 600 C (1400F), IT

MAY DAMAGE THE EQUIPMENT.

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

MS6567_Preface_uk.p65 07.05.2002, 15:294

Getting Started

1-1

Chapter 1. Getting Started

TOPICS

Mainboard Specification 1-2

Mainboard Layout 1-4

Quick Components Guide 1-5

Thank you for purchasing 645E Max2 (MS-6567) series ATX

motherboard. The 645E Max2 (MS-6567) series is a superior computer

mainboard based on SiS 645DX & 961B chipsets for optimal system

efficiency. Designed to fit the advanced Intel®Pentium®4 processors in the

478 pin package, the motherboard provides a high performance and profes-

sional desktop platform solution.

Getting Started

Chapter 1

1-2

CPU

* Supports Socket 478 for P4 processors (Willimate 478 and Northwood 478)

* FSB @ 400/533 MHz (100/133 MHz QDR)

* Supports 1.3GHz, 1.4GHz, ... 2.4GHz and up

Chipset

* SiS 645DX chipset (702 BGA)

- Supports 64-bit P4 processors at 533MHz

- Supports 32-bit AGP 4x/2x slot

- Supports 64-bit high performance DDR333 / DDR266 memory controller

- Supports bi-directional 16-bit data bus with 533MHz bandwidth MuTIOL

* SiS 961B chipset (371 BGA)

- Supports Dual-IDE ATA 66/100/133

- AC’97 link controller

- Low pin count interface for SIO

Main Memory

* Three 184-pin DDR DIMM sockets

* Maximum memory size up to 3GB without ECC

Slots

* One AGP (2x/4x) universal slot

* Five 32-bit Master PCI slots (PCI v2.2)

* One CNR (Communication Network Riser) slot

On-Board IDE

* Dual IDE controllers integrated in SiS 961B

* Supports PIO, Bus Master, Ultra DMA 66/100/133 operation

* Can connect up to 4 IDE devices

On-Board Peripherals

External:

- PS2 Keyboard + PS2 Mouse

- USB x 2

- Parallel + Serial 2

- Game port + Audio (Mic-in, Line-in, Line-out)

- RJ45 (LAN)

Internal:

- Front Panel (2 x 5) w/ Intel pin definition

- Front USB (2 x 5) w/ Intel pin definition * 2

- Front Audio (2 x 5) w/ Intel pin definition

Mainboard Specification

Getting Started

1-3

- Front IR (2 x 5) w/ Intel pin definition

- IDE x 2, Floppy, ATX power connector

- CPU Fan, System Fan, Audio (CD-in)

Audio

* AC97 link controller integrated in SiS 961B

* 6-channel S/W audio codec ALC 650 (optional)

- Compliance w/ AC97 v2.2 spec.

- Meets PC2001 audio performance requirement

- Supports SPDIF I/O

BIOS

* 2Mb AMI BIOS w/ PnP, ACPI, SMBIOS 2.3, Green and Boot Block

* Provides DMI2.0, WfM2.0, WOR and SMBus for system management.

Dimension

* ATX Form Factor: 30.5 cm (L) x 23 cm (W)

Mounting

* 6 mounting holes

Ethernet Controller Features

* Ethernet Controller chip: Realtek RTL 8101L

* Supports 10 Mb/s and 100 Mb/s N-way Autonegotiation operation

* PCI local bus single-chip Fast Ethernet controller

- Compliant to PCI Revision 2.2

- Supports ACPI, PCI power management

* Compliant to PC99/PC2001 standard

* Supports Wake-On-LAN (WOL) signals (active high, active low, positive pulse,

and negative pulse)

* Half/Full duplex capability

Others

Vcore adjustable

STR support

PC2001 compliant

Supports S-Bracket (optional)

Supports 533MHz FSB

Supports LAN

Chapter 1

1-4

Mainboard Layout

645E Max2 (MS-6567) series ATX Mainboard

Getting Started

1-5

Quick Components Guide

Component Function

DDR1~3 Installing DDR SDRAM modules

Socket 478 Installing CPU

CPUFA Connecting to CPUFAN

SYSFA Connecting to SYSTEM FAN

ATX Power Supply Installing power supply

JPW1 Connecting to 12V power connector

IDE1 & IDE2 Connecting to IDE hard disk drive

FDD1 Connecting to floppy disk drive

JUSB1 Connecting to USB interfaces

PCI Slot 1~5 Installing expansion cards

AGP Slot Installing AGP cards

CNR Slot Installing CNR cards

JBAT1 Clearing CMOS data

JFP1/2 Connecting to case

JIR1 Connecting to IR module

JAUD1 Connecting to audio connector

JDB1 Connecting to D-Bracket™ (optional)

JSP3 Connecting to SPDIF interface (optional

S-Bracket)

JCD1 Connecting to CD-ROM audio connector

Chapter 1

1-6

S-Bracket (Optional)

S-Bracket is a bracket which provides 2 SPDIF jacks for digital audio

transmission and 2 analog Line-Out connectors for additional 4-channel ana-

log audio output. With the S-Bracket, your system will be able to perform 6-

channel audio operation for wonderful surround sound effect, or connect to

Sony & Philips Digital Interface (SPDIF) speakers for audio transmission with

better quality.

The S-Bracket offers two types of SPDIF connectors: one for optical

fiber and the other for coaxial connection. Select the appropriate one to meet

your own need. For more information on S-Bracket, refer to Appendix A: Using

4- or 6-Channel Audio Function.

S-Bracket

SPDIF jack (optical)

SPDIF jack (coaxial)

Analog Line-Out jacks

Other manuals for MS-6567

This manual suits for next models

Table of contents

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual