MSI MS-6533E User manual
i
Version 1.0
G52-MA00628
MS-6533E/G/EG (v1.X)
Micro ATX Mainboard
MSI
MICRO-STAR INTERNATIONAL
ii
Manual Rev: 1.0
Release Date: July 2002
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
Micro-Star International MS-6533
Tested to comply
with FCC Standard
For Home or Office Use
iii
Edition
July 2002
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks are the properties of their respective owners.
Intel®and Pentium®are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.
Windows®98/2000/NT/XP are registered trademarks of Microsoft Corporation.
Netware®is a registered trademark of Novell, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
AMI®is a registered trademark of American Megatrends Inc.
Revision History
Revision Revision History Date
1.0 First Release July 2002
iv
Safety Instructions
1. Read the safety instructions carefully.
2. Save this User’s Guide for possible use later.
3. Keep this equipment away from humidity.
4. Lay this equipment on a stable and flat surface before setting it up.
5. The openings on the enclosure are used for air convection and to prevent
the equipment from overheating. Note: Do not cover the openings.
6. Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 110/220V before connecting the equip-
ment to the power inlet.
7. Place the power cord in a way that people are unlikely to step on it. Do not
place anything on the power cord.
8. Always unplug the power cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage the equipment
or cause an electrical shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zthe power cord or plug is damaged
zliquid has penetrated into the equipment
zthe equipment has been exposed to moisture
zthe equipment has not work well or you can not get it work according
to User’s Guide
zthe equipment was dropped and damaged
zthe equipment has obvious signs of breakage
12. Do not leave the equipment in an unconditioned environment with a stor-
age temperature of 600 C (1400F) or above, which may damage the
equipment.
CAUTION: To prevent explosion caused by improper battery
replacement, use the same or equivalent type of battery recommended
by the manufacturer only.
v
CONTENTS
Chapter 1. Getting Started ........................................................................ 1-1
Mainboard Specification ...................................................................... 1-2
Mainboard Layout ............................................................................... 1-5
Quick Components Guide .................................................................... 1-8
Chapter 2. Hardware Setup ....................................................................... 2-1
Central Processing Unit: CPU .............................................................. 2-2
CPU Installation Procedures ......................................................... 2-2
Installing the CPU Fan .................................................................. 2-3
CPU Core Speed Derivation Procedure ......................................... 2-4
Memory ................................................................................................ 2-5
Introduction to DDR SDRAM ....................................................... 2-5
DDR Module Combination ............................................................ 2-6
Installing DDR Modules ............................................................... 2-6
Power Supply ....................................................................................... 2-7
ATX 20-Pin Power Connector: CONN1 ......................................... 2-7
ATX 12V Power Connector: JPW1 ................................................ 2-7
Back Panel ............................................................................................ 2-8
Mouse Connector: JKBMS1 ......................................................... 2-8
Keyboard Connector: JKBMS1 ..................................................... 2-9
USB Connectors ............................................................................ 2-9
Serial Port Connectors: COM A & COM B / JCOM3 ................... 2-10
RJ-45 LAN Jack ........................................................................... 2-11
Joystick/Midi Connectors ........................................................... 2-11
Audio Port Connectors ............................................................... 2-11
Parallel Port Connector: LPT1 ...................................................... 2-12
Connectors ......................................................................................... 2-13
Floppy Disk Drive Connector: FDD1 ........................................... 2-13
Chassis Intrusion Switch Connector: J8 ...................................... 2-13
vi
Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-14
JCD1/JAUX1/JMD1 .................................................................... 2-15
CPUFA/SYSFA ............................................................................ 2-16
Front Panel Connectors: JFP1 & JFP2 ......................................... 2-17
Front Panel Audio Connector: JAUD .......................................... 2-18
Front USB Connectors: JUSB2 & JUSB3 ..................................... 2-19
IrDA Infrared Module Header: JIR .............................................. 2-20
LAN Active LED Jumper: JLAN .................................................. 2-20
IEEE 1394 Connectors: J1394_1 & J1394_2 .................................. 2-21
SPDIF Connector: JSP1 ............................................................... 2-22
Modem Connector: JMOD .......................................................... 2-23
Jumpers .............................................................................................. 2-25
Clear CMOS Jumper: JBAT1 ........................................................ 2-25
Slots ................................................................................................... 2-26
AGP (Accelerated Graphics Port) Slot ......................................... 2-26
PCI Slots ...................................................................................... 2-26
CNR (Communication Network Riser) ......................................... 2-26
PCI Interrupt Request Routing .................................................... 2-27
Chapter 3. AWARD BIOS Setup ............................................................... 3-1
Entering Setup ...................................................................................... 3-2
Control Keys ................................................................................. 3-2
Getting Help .................................................................................. 3-3
The Main Menu ................................................................................... 3-4
Standard CMOS Features .................................................................... 3-6
Advanced BIOS Features .................................................................... 3-8
Advanced Chipset Features ............................................................... 3-11
Integrated Peripherals ........................................................................ 3-13
Power Management Setup ................................................................. 3-19
vii
PNP/PCI Configurations ..................................................................... 3-24
PC Health Status ................................................................................ 3-26
Frequency/Voltage Control ................................................................ 3-27
Load Fail-Safe/Optimized Defaults ..................................................... 3-29
Set Supervisor/User Password ........................................................... 3-30
Appendix: Using 4- or 6-Channel Audio Function .................................... A-1
Installing the Audio Driver ................................................................. A-2
Using 4- or 6- Channel Audio Function .............................................. A-4
Selecting 4- or 6- Channel Setting ....................................................... A-6
Testing the Connected Speaker .......................................................... A-7
Playing KaraOK .................................................................................. A-8
Glossary .................................................................................................... G-1
Getting Started
1-1
Chapter 1. Getting Started
Thank you for purchasing the MS-6533E/G/EG series Micro ATX
mainboards. The MS-6533E/G/EG series are based on SiS645DX/SiS650GX/
SiS651 (co-layout) and SiS962L/SiS962 chipsets for optimal system efficiency.
Designed to fit the advanced Intel®Pentium®4 processors in the 478 pin
package, the MS-6533 E/G/EG series deliver a high performance and profes-
sional desktop platform solution.
1
Getting Started
TOPICS
Mainboard Specification 1-2
Mainboard Layout 1-5
Quick Components Guide 1-8
Chapter 1
1-2
CPU
Socket 478 for P4 processors (Willimate 478 and Northwood 478) with 400/
533 MHz (100/133MHz QDIR)
Core frequency from 1.7GHz to 2.53 GHz and up
Chipset
SiS®645DX/650GX/651 HMAC/IGUI HMAC /IGUI HMAC (702 pin BGA)
- High performance host interface 400/533 (645 DX and 651 only) MHz
- Support 64-bit high performance DDR333 (645 DX and 651 only) /
DDR266/DDR 200 and PC133/100 memory controller
- Support AGP 4X/2X interface with fast write transaction
- High throughput SiS HyperZip connect to SiS962L/962 HyperZip Media
I/O
- High performance 2D/3D and Video Accelerator (650GX and 651 only)
- Complete TV-out/Digital flat panel solution and MPEG-2/1 Video
decoder (651 only)
SiS®962L/962 HyperZip Media I/O (371BGA)
- High performance HyperZip connect to Sis series NB
- Integrated multi-threaded I/O link ensures concurrency of up/down stream
data transfer with 1.2GB/s bandwidth
- Integrated HyperZip connect to PCI bridge
- Dual IDE Master/Slave controller
- Integrated USB 2.0/1.1 host controller and Fast Ethernet MAC controller
- Integrated audio controller with AC97 interface
- Advanced power management and PC2001 compliance
- Integrated RTC and DMA interrupt and keyboard controller
- Integrated PCI to LPCC bridge
- Integrated IEEE 1394 Host controller (SiS962 only)
MainMemory
Supports four memory banks using two 184-pin unbuffered DDR DIMM.
Supports up to 2GB memory size.
Slots
One AGP (Accelerated Graphics Port) 2X/4X slot.
Three PCI 2.2 32-bit PCI bus slots (support 3.3V/5V PCI bus interface).
One CNR (Communication Network Riser) slot.
Mainboard Specification
Getting Started
1-3
On-BoardIDE
Dual IDE controllers integrated in Sis 962L/962.
Support P/O, Bus Master, Ultra DMA66/100/133 operation.
Can connect up to four IDE devices.
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial ports (COM A + COM B).
- 1 parallel port supports SPP/EPP/ECP mode.
- 6 USB ports (2.0/1.1) (Rear * 2/ Front * 4).
- 1 IrDA connector for SIR.
- 1 RJ-45 LAN jack (optional).
- 1 audio/game port.
- 1 VGA port (650GX and 651only).
- 2 IEEE 1394 ports (optional).
Audio
AC97 link controller integrated in SiS 962L/SiS 962.
2/6 channels software audio codec RealTek ALC201A/202A/ALC650.
- Compliance with AC97 v2.1 Spec.
- Meet PC2001 audio performance requirement.
LAN (optional)
PCI local bus single-chip Fast Ethernet Controller, RealTek RTL8101L.
- Integrated Fast Ethernet MAC and PHY in one chip.
- Supports 10Mb/s and 100Mb/s auto-negotiation operation.
- Compliance with PCI v2.2 and PC99 standard.
Supports Wake-On-LAN and remote wake-up.
Supports ACPI power management.
Modem(optional)
Supports MSI proprietary modem card MS-6961.
IEEE 1394 (SiS 962 only) (optional)
Compliant with IEEE 1394-1995 and 1394a-2000
Supports Serial Bus Data Rates of 100, 200 and 400 Mbits/s.
This manual suits for next models
2
Table of contents
Other MSI Motherboard manuals
MSI
MSI MS-98G6 User manual
MSI
MSI 970A-G46 Series User manual
MSI
MSI Z97-G43 GAMING User manual
MSI
MSI MS-7380 User manual
MSI
MSI MS-98H3 User manual
MSI
MSI X370 XPOWER GAMING TITANIUM User manual
MSI
MSI MPG Z590 GAMING CARBON WIFI User manual
MSI
MSI MAG B460M MORTAR WIFI User manual
MSI
MSI KT6-V User manual
MSI
MSI MPG X570S Carbon EK X User manual
