MSI MS-6309 User manual

CHAPTER 1 INTRODUCTION

1-1

Chapter 1

INTRODUCTION

The 694 Master (MS-6309 ver 3.0) ATX mainboard is a high-performance

computer mainboard based on VIA®VT82C694X chipset. The 694 Master

(MS-6309 ver 3.0) is designed for the Intel®CeleronTM or Coppermine (FC-

PGA) processor for inexpensive business/personal desktop markets.

TheApolloPro133A(VT82C694X)isaSocket-370systemlogicnorthbridge

with the addition of 133 MHz capability for both the CPU and SDRAM

interfaces. Apollo Pro133A may be used to implement both desktop and

notebook personal computer systems from 66MHz to 133MHz based on

Socket-370. The primary features of the Apollo Pro133A-North Bridge are:

Slot-1orSocket-370CPU(FrontSideBus)Interface(66 / 100 / 133MHz),

DRAMMemory Interface (66 / 100/133MHz), AGP Bus Interface(66MHz),

PCIBusInterface(33MHz), Mobile Power Management.

TheVT82C686B PSIPC (PCI Super-I/OIntegratedPeripheral Controller) is a

high integration, high performance, power-efficient, and high compatibility

device that supports Intel and non-Intel based processor to PCI bus bridge

functionality to make a complete Microsoft PC99-compliant PCI/ISA system.

CHAPTER 1 INTRODUCTION

1-2

Mainboard Features

CPU

lSocket 370 for Intel®CeleronTM/ Coppermine processor.

lSupports233MHz,266MHz, 300MHz,333MHz,350MHz, 400MHz,

450MHz,500MHZ,533MHzto1GHz.

Chipset

lVIA®694Xchipset (510BGA)

-AGP 4x and PCI plus Advanced ECC Memory Controller

-SupportPC100/133 SDRAM, VCM technology

lVIA®VT82C686Bchipset(352BGA)

- Advanced Power Management Features

-IntegratedSuperI/O(FDC,LPT,COM 1/2, and IR)

- DirectSound AC97 Audio

-DualbusMasterIDEUltraDMA33/66/100

-ACPI

ClockGenerator

l66.6MHz,100MHz and133MHzclocks are supported.

MainMemory

lSupport eight memory banks using four 168-pin unbuffered DIMM.

lSupporta maximummemory sizeof 2GB (32Mx8).

lSupportECC(1-bitErrorCodeCorrect)function.

lSupport 3.3v SDRAM DIMM.

Slots

lOne AGP (Accelerated Graphics Port) slot.

- AGP specification compliant

- AGP66MHz 3.3v/1.5v for 2x/4x device support

lOne CNR (Communication Network Riser) slot which support Modem

only.

lSix 32-bit Master PCI Bus slots.

lSupports 3.3v/5v PCI bus Interface.

CHAPTER 1 INTRODUCTION

1-3

On-BoardIDE

lAnIDEcontrolleron the VIA®VT82C686BChipsetprovidesIDE HDD/

CD-ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation

modes.

lCan connect up to four IDE devices.

On-BoardPeripherals

lOn-BoardPeripherals include:

-1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

-2 serial ports (COMA + COMB)

- 1 parallel port supports SPP/EPP/ECP mode

- 4 USB ports

- 1 IrDA/HP connector for SIR

-1394 (optional)

Audio

lChip Integrated (Software Audio)

-AC’97Compliant

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface (DMI)

function which records your mainboard specifications.

Dimension

lATXFormFactor : 30.5cm (L)x21cm (W) x4 layers PCB

Mounting

l6 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ATX

Power Supply

VIA

694X

chipset

Socket 370

DIMM 2

Top: mouse

Bottom:

keyboard

Top:Port 1

USB

DIMM 3

IDE1

Bottom:

Port2

IDE2 FDD

VT82C686B

JMDM1

JFP1

JGS1

JGL1

JBAT1

JWOL1

JPH

JAUX

CPUFAN

BATT

Top: LPT

Bottom:

COMA

COMB

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

694 Master (MS-6309 ver 3.0) Mainboard

JCD

USB2

JRMS1

CNR1

AGP Slot

SYSFAN

JVTT

DIMM 1

PCI SLOT 4

PCI SLOT 5

BIOS

Mainboard Layout

VT1611A

DIMM 4

PCI SLOT 6

JFSH1

DiagnosticLED

JSPK1

J601

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-1

+27

Chapter 2

HARDWARE INSTALLATION

Central Processing Unit: CPU

The mainboard operates with Intel® CeleronTM/Pentium® III (FC-PGA)

processor. The mainboard uses a CPU socket called Socket 370 for easy

CPU installation. The CPU should always have a eat Sink and a cooling

fan attached to prevent overheating.

3. Press the lever down to

complete the installation.

2. Locate Pin 1 in the socket

and look for the white dot or

cut edge in the CPU. Match

Pin 1 with the white dot/cut

edge. Then, insert the CPU.

It should insert easily.

Open Lever

Pin 1

Sliding

Plate

White dot/

Cut edge

Lever

1. Pull the lever sideways away

from the socket. Then, raise

the lever up to a 90-degree

angle.

Pin 1

••

• CPU Installation Procedures

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-2

The BIOS can be used to set the CPU ost Bus Frequency Clock.

If CPU Clock = 66M z

Core/Bus ratio = 3.5

then CPU core speed = ost Clock x Core/Bus ratio

= 66M z x 3.5

= 233M z

• CPU Core Speed Derivation Procedure

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-3

• Fan Power Connectors: CPUFAN & SYSFAN

These connectors support system cooling fan with + 12V. It sup-

ports three pin head connector. When connecting the wire to the

connector, always take note that the red wire is the positive and

should be connected to the +12V, the black wire is Ground and

should be connected to GND. If your mainboard has System ard-

ware Monitor chipset on-board, you must use a specially designed

fan with speed sensor to take advantage of this function.

For fans with fan speed sensor, every rotation of the fan will send out 2

pulses. System ardware Monitor will count and report the fan rotation

speed.

Note: Always consult your reseller for proper CPU cooling fan.

CPUFAN

CPUFAN: Processor Fan

SYSFAN: System Fan

+12V

GND

SENSOR

SYSFAN

+12V

GND

SENSOR

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

Clear CMOS Jumper: JBAClear CMOS Jumper: JBA

Clear CMOS Jumper: JBAT1T1

T1T1

A battery must be used to retain the mainboard configuration in CMOS

RAM. Short 1-2 pins of JBAT1 to store the CMOS data.

Keep Data Clear Data

Note: You can clear CMOS by shorting 2-3 pin, while the system is off.

Then, return to 1-2 pin position. Avoid clearing the CMOS while

the system is on, it will damage the mainboard. Always unplug

the power cord from the wall socket.

JBAT1

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-5

Memory InstallationMemory Installation

Memory Installation

••

• Memory ank Configuration

The mainboard supports a maximum memory size of 2GB (256-bit

technology) SDRAM: It provides four 168-pin unbuffered DIMMs (Double

In-Line Memory Module) sockets. It supports 8 MB to 512 Mbytes DIMM

memory module.

DIMM1(Bank0+ Bank1)

DIMM2(Bank2+ Bank3)

DIMM3(Bank4+ Bank5)

DIMM4(Bank6+ Bank7)

There are three kinds of DIMM specification supported

by this mainboard: PC133, PC100 and PC66 If you

use 66MHz CPU Bus Frequency, these four DIMM

Specs is supported If you use 100 MHz CPU Bus

Frequency, only PC100 DIMM Specs is supported If

you use 133 MHz CPU Bus Frequency, only PC133

DIMM Specs is supported



WARNING!

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-6

A. How to install a DIMM Module

1. The DIMM slot has 2 Notch Keys VOLT and DRAM, so the

DIMM memory module can only fit in one direction.

2. Insert the DIMM memory module vertically into the DIMM slot.

Then push it in.

3. The plastic clip at the side of the DIMM slot will automatically

close.

Single Sided DIMM

Double Sided DIMM

VOLTDRA

••

• Memory Installation Procedures

Other manuals for MS-6309

Table of contents

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual