MSC 96M5980 User manual

96M5980
Intel ®ArrandaleTM /PCH
Mini-ITX Motherboard
USER’S MANUAL
Version 1.0

ii
96M5980 User’s Manual
Acknowledgments
AMI is a registered trademark of American Megatrends Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Intel® Arrandale DC Mobile Processor are registered
trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Fintek is a registered trademark of Fintek Electronics Corporation.
All other product names or trademarks are properties of their
respective owners.

96M5980 User’s Manual iii
Table of Contents
Introduction.......................................................1
Product Description ............................................................. 1
Checklist .............................................................................. 2
96M5980 Specifications ..................................................... 3
Board Dimensions ............................................................... 4
Installations.......................................................6
Installing the CPU ............................................................... 7
Installing the Memory ......................................................... 8
Setting the Jumpers ............................................................. 9
Connectors on 96M5980 .................................................... 13
BIOS Setup.......................................................23
Drivers Installation......................................51
Intel Chipset Software Installation Utility......................... 52
VGA Drivers Installation .................................................. 54
Realtek HD Audio Driver Installation ............................... 56
LAN Drivers Installation ................................................... 57
Intel® Management Engine Interface ............................... 60
Appendix...........................................................63
A. I/O Port Address Map ................................................... 63
B. Interrupt Request Lines (IRQ) ...................................... 64
C. Watchdog Timer Configuration .................................... 65

iv
96M5980 User’s Manual
IMPORTANT NOTE: When the system boots without the CRT being
connected, there will be no image on screen when you insert the
CRT/VGA cable. To show the image on screen, the hotkey must be
pressed (CTRL-ALT-F1).

INTRODUCTION
96M5980 User’s Manual 1
Introduction
Product Description
The 96M5980 Mini ITX board incorporates the Intel® Chipset for Embedded
Computing, consisting of the Intel® Arrandale DC mobile processor (integrated
Graphic and Memory Controller) and Intel® Ibex Peak-M (PCH), an optimized
integrated graphics solution with a 800/1066MHz front-side bus. Dimensions of
the board are 170mm x 170mm.
The integrated graphics controller contains a refresh of the 5thgeneration
graphics core support Intel® Dynamic Video Memory Technology, Smart 2D
Display Technology, Clear Video Technology. It features a low-power design, is
validated with the Intel® Arrandale DC mobile processors on 45nm process.
With dual channel DDR3 800/1066MHz two SoDIMM sockets on board, the
board supports up to 8GB of DDR3 system memory.
The main features of the board are:
Supports Intel® Arrandale DC mobile processor
Supports up to 3.0GHz, 1066MHz FSB
Two DDR3 SoDIMM, Max. 8GB memory
Onboard Gigabit PHY and Intel PCI-Express Gigabit LAN
Integrated Graphics VGA for CRT /DVI/ LVDS
4x SATA, 10x USB 2.0, 4x COM, Watchdog timer
1x Mini PCI-E (Mini Card), 1x PCI, 1xPCI-E(x1) slots

INTRODUCTION
2
96M5980 User’s Manual
Checklist
Your 96M5980 package should include the items listed below.
•The 96M5980 Mini-ITX motherboard
•This User’s Manual
•1 CD containing chipset drivers and flash memory utility
•Cable kit (Serial port, Serial ATA)

INTRODUCTION
96M5980 User’s Manual 3
96M5980 Specifications
CPU Supported Intel® Arrandale DC mobile processor
CPU Voltage 0.700V ~ 1.5V (IMVP-6.5)
System Speed Up to 3.0GHz or above
CPU FSB 1066MHz FSB
Cache Up to 4MB shared L3 Cache
Green /APM APM1.2
CPU Socket rPGA Socket 989
Chipset Intel Ibex Peak-M (PCH) Chipset
PCH: 25mm x 27mm, 1071-pin FCBGA
BIOS AMI BIOS, supports ACPI function
Memory DDR3 800/1066 SoDIMM x2 (w/o ECC function), Max. 8GB
VGA Arrandale DC mobile processor integrated graphics
Supports CRT
Supports DVI single or Dual
LVDS LCD Panel Arrandale DC mobile processor built-in, supports 24-bit, single or
dual channel LVDS
LAN 1. PCH 10/100/gigabit MAC + PHY
•Intel 82577LM 10/100/1000
2. Intell 82574L PCI-e Gigabit LAN controller x1 (96M5980F)
USB PCH built-in USB 2.0 host controller, support 10 ports
Serial ATA Ports PCH built-in SATA controller, supports 4 ports
IAMT6.0 PCH built-in Intel Active Management Technology VER 6.0 with HW
KVM (96M5980RF only)
Audio PCH built-in High Definition audio controller:ALC888 w/ 7.1 channels
LPC I/O F81865F: COM1, COM2 (RS232/RS422/RS485), COM3 and COM4
Hardware monitor (3 thermal, 4 voltage monitor inputs, 2 fan
headers)
Digital IO 4 in & 4 out
Keyboard/Mouse Supports PS/2 keyboard/mouse connector
Expansion Slots PCI slot x1, PIC-E (x1) slot x1 and Mini PCIE socket x1
Edge Connector PS/2 connector x1 for keyboard/mouse and dual USB stack
connector
Gigabit LAN RJ-45 + dual USB stack connector x2
DVI-D and DVI-I stack connector x1
DB9 x1 for COM 1; DB15 x1 for VGA
RCA Jack 3x1 for Audio (Front-Out, Line-In, Mic)
Onboard Header/
Connector
10-pin headerx1 for Digital I/O; 10-pin header x1 for COM2
20-pin header x1 for COM3, COM4
10-pin header x 2 for USB 7,8; 9,10
DF13 connector x2 for LVDS;
10-pin header x1 for audio Line-Out & Mic
4-pin header x1 for CD in, SPDIF-out connector x1
SATA connector x4 for SATA ports
Watchdog Timer Yes (256 segments, 0, 1, 2…255 sec/min)
System Voltage +5V, +3.3V, +12V, -12V, 5VSB (2A)
Others Modem Wakeup, LAN Wakeup
Board Size 170mm x 170mm (Mini ITX)

INTRODUCTION
[
Board Dimensions
4
96M5980 User’s Manual

INTRODUCTION
96M5980 User’s Manual 5

INSTALLATIONS
6
96M5980 User’s Manual
Installations
This section provides information on how to use the jumpers and
connectors on the 96M5980 in order to set up a workable system. The
topics covered are:
Installing the CPU .................................................................................. 7
Installing the Memory ............................................................................ 8
Setting the Jumpers ................................................................................ 9
Connectors on 96M5980 ..................................................................... 13
Table of contents
Other MSC Motherboard manuals























