MPS EVKT6515 User manual
EVKT6515 DC Brush
Motor Driver Board
MP5402M Module Board SpecificationRev. 1.0 www.MonolithicPower.com 1
6/10/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
FEATURES
Input Voltage Range 7V to 35V
Output Current Up to 1.5A
Current Limit / Regulation Yes
Over Current Protection Yes
Over Temperature Protection Yes
Operation Temperature -40°C to +85°C
USER GUIDE
To quickly start using the EVKT6515 DC brush
motor driver board, do the following:
1. Connect the motor to OUT1 and OUT2 pins.
2. Connect a power supply (between 7V and
35V) to the VIN and GND pins.
3. Slide the switch to “FWD” or “REV” to control
the direction of the motor.
4. Adjust the motor speed by turning the
thumbwheel pot.
Note:
Please pay attention to the correct input
polarity connection, to avoid damage due to
reversed connection.
*For more details about the MP6515, please visit MPS’ website: http://www.monolithicpower.com
(Dimensions in millimeters)
MP1494 – SYNCHRONOUS STEP-DOWN CONVERTER WITH INTERNAL MOSFETS
Other MPS Motherboard manuals
MPS
MPS MP2672 User manual
MPS
MPS EV7740DN-01B User manual
MPS
MPS EV6551-QB-00A User manual
MPS
MPS EV0035 User manual
MPS
MPS EV2602DQ-00B User manual
MPS
MPS EV1477-TF-00B User manual
MPS
MPS EV1518DG-00A User manual
MPS
MPS EVQ4488-U-00B User manual
MPS
MPS EV2483DQ-00C User manual
MPS
MPS EV6001DN-00D User manual
MPS
MPS MagAlpha EVMA Q-00A Series Operating instructions
MPS
MPS EV2637A-R-00A User manual
MPS
MPS EV5920-5048-V-00A User manual
MPS
MPS EV2632-R-01A User manual
MPS
MPS EV2605DQ-00B User manual
MPS
MPS MP2483 User manual
MPS
MPS EV6536-U-00A User manual
MPS
MPS EV2696A-Q-00B User manual
MPS
MPS EV0030 User manual
MPS
MPS EV8042DF-00B User manual
