Mitsubishi MELSEC System Q User manual

MELSEC System Q

Programmable Logic Controllers

Beginner´s Manual

MITSUBISHI ELECTRIC

Art. no.: 209093

29082007

Version A

INDUSTRIAL AUTOMATION

MITSUBISHI ELECTRIC

The texts, illustration, diagrams and examples in this manual are provided

for information purposes only. They are intended as aids to help explain the

installation, operation, programming and use of the

programmable logic controllers of the MELSEC System Q.

If you have any questions about the installation and operation of any of the

products described in this manual please contact your local sales office or distributor (see back cover).

You can find the latest information and answers to frequently asked questions on our website at

www.mitsubishi-automation.com

MITSUBISHI ELECTRIC EUROPE BV reserves the right to make changes

to this manual or the technical specifications of its products at any time without notice.

Beginner’s Manual for the programmable logic controllers of the

MELSEC System Q

Art. no.: 209093

Version Revisions / Additions / Corrections

A 08/2007 pdp-dk First edition

Safety Guidelines

For use by qualified staff only

This manual is only intended for use by properly trained and qualified electrical technicians

who are fully acquainted with the relevant automation technology safety standards. All work

with the hardware described, including system design, installation, configuration, mainte-

nance, service and testing of the equipment, may only be performed by trained electrical tech-

nicians with approved qualifications who are fully acquainted with all the applicable automa-

tion technology safety standards and regulations. Any operations or modifications to the

hardware and/or software of our products not specifically described in this manual may only be

performed by authorised Mitsubishi Electric staff.

Proper use of the products

The programmable logic controllers of the MELSEC System Q are only intended for the spe-

cific applications explicitly described in this manual. All parameters and settings specified in

this manual must be observed. The products described have all been designed, manufac-

tured, tested and documented in strict compliance with the relevant safety standards. Unquali-

fied modification of the hardware or software or failure to observe the warnings on the products

and in this manual may result in serious personal injury and/or damage to property. Only

peripherals and expansion equipment specifically recommended and approved by Mitsubishi

Electric may be used with the programmable logic controllers of the MELSEC System Q.

All and any other uses or application of the products shall be deemed to be improper.

Relevant safety regulations

All safety and accident prevention regulations relevant to your specific application must be

observed in the system design, installation, configuration, maintenance, servicing and testing

of these products. The regulations listed below are particularly important in this regard. This

list does not claim to be complete, however; you are responsible for being familiar with and

conforming to the regulations applicable to you in your location.

쎲VDE Standards

–VDE 0100

Regulations for the erection of power installations with rated voltages below 1000 V

–VDE 0105

Operation of power installations

–VDE 0113

Electrical installations with electronic equipment

–VDE 0160

Electronic equipment for use in power installations

–VDE 0550/0551

Regulations for transformers

–VDE 0700

Safety of electrical appliances for household use and similar applications

–VDE 0860

Safety regulations for mains-powered electronic appliances and their accessories for

household use and similar applications.

쎲Fire safety regulations

MELSEC System Q Beginners Manual I

Safety Guidelines

쎲Accident prevention regulations

–VBG Nr.4

Electrical systems and equipment

Safety warnings in this manual

In this manual warnings that are relevant for safety are identified as follows:

PDANGER:

Failure to observe the safety warnings identified with this symbol can result in health

and injury hazards for the user.

EWARNING:

Failure to observe the safety warnings identified with this symbol can result in damage

to the equipment or other property.

II MITSUBISHI ELECTRIC

Safety Guidelines

General safety information and precautions

The following safety precautions are intended as a general guideline for using PLC systems

together with other equipment. These precautions must always be observed in the design,

installation and operation of all control systems.

DANGER

MELSEC System Q Beginners Manual III

Safety Guidelines

쎲

Observe all safety and accident prevention regulations applicable to your spe-

cific application. Always disconnect all power supplies before performing

installation and wiring work or opening any of the assemblies, components and

devices.

쎲

Assemblies, components and devices must always be installed in a shockproof

housing fitted with a proper cover and fuses or circuit breakers.

쎲

Devices with a permanent connection to the mains power supply must be inte-

grated in the building installations with an all-pole disconnection switch and a

suitable fuse.

쎲

Check power cables and lines connected to the equipment regularly for breaks

and insulation damage. If cable damage is found immediately disconnect the

equipment and the cables from the power supply and replace the defective

cabling.

쎲

Before using the equipment for the first time check that the power supply rating

matches that of the local mains power.

쎲

Take appropriate steps to ensure that cable damage or core breaks in the signal

lines cannot cause undefined states in the equipment.

쎲

You are responsible for taking the necessary precautions to ensure that pro-

grams interrupted by brownouts and power failures can be restarted properly

and safely. In particular, you must ensure that dangerous conditions cannot

occur under any circumstances, even for brief periods.

쎲

EMERGENCY OFF facilities conforming to EN 60204/IEC 204 and VDE 0113

must remain fully operative at all times and in all PLC operating modes. The

EMERGENCY OFF facility reset function must be designed so that it cannot

ever cause an uncontrolled or undefined restart.

쎲

You must implement both hardware and software safety precautions to prevent

the possibility of undefined control system states caused by signal line cable or

core breaks.

쎲

When using modules always ensure that all electrical and mechanical specifi-

cations and requirements are observed exactly.

IV MITSUBISHI ELECTRIC

Safety Guidelines

Other manuals for MELSEC System Q

Table of contents

Other Mitsubishi Controllers manuals

Mitsubishi

Mitsubishi Q12PRHCPU User manual

Mitsubishi

Mitsubishi FX0S Series User manual

Mitsubishi

Mitsubishi Q2ACPU User manual

Mitsubishi

Mitsubishi Q64TCRT User manual

Mitsubishi

Mitsubishi MELSEC-A series User manual

Mitsubishi

Mitsubishi FBC15N User manual

Mitsubishi

Mitsubishi FX2N-32CCL User manual

Mitsubishi

Mitsubishi FX3U-32DP User manual

Mitsubishi

Mitsubishi FX3U Series Owner's manual

Mitsubishi

Mitsubishi MELSEC Q Series User manual

Mitsubishi

Mitsubishi MELSEC QS Series User manual

Mitsubishi

Mitsubishi 00JCPU User manual

Mitsubishi

Mitsubishi MELSEC-Q/L Owner's manual

Mitsubishi

Mitsubishi FX3U-20SSC-H User manual

Mitsubishi

Mitsubishi CR751-D Series User manual

Mitsubishi

Mitsubishi QCPU (Q Mode) User manual

Mitsubishi

Mitsubishi FX2N-10GM Owner's manual

Mitsubishi

Mitsubishi MDS-A-SVJ Series User manual

Mitsubishi

Mitsubishi FX1S Series User manual

Mitsubishi

Mitsubishi MELSEC-F FX3U-4AD-PT-ADP User manual

Mitsubishi

Mitsubishi MELSEC QJ71C24N User manual

Mitsubishi

Mitsubishi Q64AD User manual

Mitsubishi

Mitsubishi CR750 Series User manual

Mitsubishi

Mitsubishi FX2NC-485ADP User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual