MIMAKI JFX 200-2513 Manual

Make sure to wear the attached

goggles and glove when you work.

JFX200-2513 / JFX500-2131

Cleaning procedure of head nozzle

Only when the nozzle drop out doesn’t recover with cleaning, daily care and maintenance, please clean

the head nozzle following the procedure below.

Procedure

1. Remove the left side cover of

the machine.

Remove the screw and remove the

cover.

2. Move the carriage(head) to the maintenance space.

(1) Press the key in LOCAL.

(2) Press the key.

(3) Press to select [HEAD MAINT.].

(4) Press the key.

•

Before performing the maintenance, please make sure to attend the training by our engineers. Maintenance

without training may cause failure of the head.

• During maintenance, never rub the nozzles of the head. If rub the nozzle part, the water-repellent surface is

degraded and the head might need to be replaced.

Supply goods for cleaning

Nozzle swab (100) Cleaning stick (50) F200/LF200 Cleaning liquid

for maintenance (100mℓ)

No.SPC-0421 No.SPC-0527 No.SPC-0568

• Make sure to use designated supply goods for nozzle cleaning. Other cleaning goods may cause early

deterioration of the head.

• Head will move for maintenance, please be careful.

[JFX200] Remove the screws

at two positions.

[JFX500] Remove the screws

at four positions.

Cover

Cover

MAINT.

© 2016 MIMAKI ENGINEERING CO., LTD. M018365-00(D203018-10)-15042016

3. Wet a new “nozzle swab” or “clean stick” with the cleaning

solution.

Please wet enough the cleaning solution.

4. Clean the nozzle surface.

(1) Press the "nozzle swab" or "cleaning stick", absorbing cleaning liquid,

against nozzle surface softly for about 10 seconds.

(2) Perform the work (1) to the entire nozzle surface.

5. Press the key after the cleaning.

After initial operation, carriage (head) return to the original position.

Please close the cover.

6. Implement the cleaning [NORMAL].

Please operate with reference to Chapter 4 of the Operation Manual.

7. Perform test printing and check the print result.

Repeat the cleaning and test printing until the result becomes normal.

• Please do not reuse the used clean stick.

It may cause nozzle clogging.

• Please do not rub the nozzle surface and press down strongly

sponge part with your fingers. Nozzle surface is damaged, and it

may cause the discharging defects.

• Please do not re-use the clean stick which was used once. Always

use a new clean stick seconds.

Press softly for 10 seconds

Nozzle surface

KT

Other manuals for JFX 200-2513

5

This manual suits for next models

1

Table of contents

Other MIMAKI Plotter manuals

MIMAKI

MIMAKI TPC-1000 Installation instructions

MIMAKI

MIMAKI CG-60AR Installation instructions

MIMAKI

MIMAKI TS34-1800A Reference guide

MIMAKI

MIMAKI APC-130 User manual

MIMAKI

MIMAKI CJV150 series User manual

MIMAKI

MIMAKI CJV150-75 User manual

MIMAKI

MIMAKI CG-AR User manual

MIMAKI

MIMAKI Tx400 User manual

MIMAKI

MIMAKI CF2 Series User manual

MIMAKI

MIMAKI CF22-1225 User manual

MIMAKI

MIMAKI TS500 User manual

MIMAKI

MIMAKI JV3-75SPII User manual

MIMAKI

MIMAKI JV3 Series User manual

MIMAKI

MIMAKI CG-60SL Assembly instructions

MIMAKI

MIMAKI TextileJet Tx2-1600 Series User manual

MIMAKI

MIMAKI CF-0912 User manual

MIMAKI

MIMAKI CG-FX SERIES Technical manual

MIMAKI

MIMAKI JFX200-2513EX Maintenance manual

MIMAKI

MIMAKI JV33 Series Operating instructions

MIMAKI

MIMAKI UCJV300 Quick start guide

MIMAKI

MIMAKI CG-AR Series Technical manual

MIMAKI

MIMAKI CF3-1631 User manual

MIMAKI

MIMAKI JV22-130 User manual

MIMAKI

MIMAKI CG-AR Series Maintenance manual

Popular Plotter manuals by other brands

MUTOH

MUTOH Kona 760 Service manual

HP

HP 7475a Service manual

Vulcan-Hart

Vulcan-Hart FC-500VC user manual

Roland

Roland TrueVIS VG-640 Supplemental manual

Furuno

Furuno RP-180 Operator's manual

Roland

Roland VersaCamm SP-540V user manual

Ioline

Ioline Summit Service manual

Summa

Summa S CLASS user manual

Gerber Technology

Gerber Technology GERBERplotter MP Series user manual

Furuno

Furuno RP-17 Operator's manual

HP

HP 7470A Operator's manual

SII

SII LP-1010 user guide

Great Computer

Great Computer JII-61 user manual

Roland

Roland VersaUv LEF - 12i troubleshooting guide

Lectra

Lectra Alys 120 Maintenance manual

MUTOH

MUTOH Ultima SC-850D Operation instructions

Skycut

Skycut D Series manual

Commodore

Commodore 1520 Technical manual