MIMAKI CG-60SL Assembly instructions

Other manuals for CG-60SL

2

Other MIMAKI Plotter manuals

MIMAKI

MIMAKI TPC-1000 User manual

MIMAKI

MIMAKI JV22-130 User manual

MIMAKI

MIMAKI CJV30 Series User manual

MIMAKI

MIMAKI JV4 Series User manual

MIMAKI

MIMAKI JV3 Series User manual

MIMAKI

MIMAKI CG-FX SERIES Technical manual

MIMAKI

MIMAKI JV400-LX User manual

MIMAKI

MIMAKI cg-100AP User manual

MIMAKI

MIMAKI CF22-1225 Installation instructions

MIMAKI

MIMAKI UJF-605C Assembly instructions

MIMAKI

MIMAKI TextileJet Tx2-1600 Series User manual

MIMAKI

MIMAKI JFX 200-2513 Manual

MIMAKI

MIMAKI CF2 Series User manual

MIMAKI

MIMAKI CFL-605RT User manual

MIMAKI

MIMAKI CFL-605RT User manual

MIMAKI

MIMAKI CFL-605RT Installation instructions

MIMAKI

MIMAKI APC-130 User manual

MIMAKI

MIMAKI GP-604D User manual

MIMAKI

MIMAKI CF3-1631 User manual

MIMAKI

MIMAKI JV400-SUV Series Maintenance manual

MIMAKI

MIMAKI TS500 User manual

MIMAKI

MIMAKI CF3-1631 User manual

MIMAKI

MIMAKI JV400-SUV Series Quick start guide

MIMAKI

MIMAKI CG-60SR User manual

Popular Plotter manuals by other brands

MUTOH

MUTOH Kona 760 Service manual

HP

HP 7475a Service manual

Vulcan-Hart

Vulcan-Hart FC-500VC user manual

Roland

Roland TrueVIS VG-640 Supplemental manual

Furuno

Furuno RP-180 Operator's manual

Roland

Roland VersaCamm SP-540V user manual

Ioline

Ioline Summit Service manual

Summa

Summa S CLASS user manual

Gerber Technology

Gerber Technology GERBERplotter MP Series user manual

Furuno

Furuno RP-17 Operator's manual

HP

HP 7470A Operator's manual

SII

SII LP-1010 user guide

Great Computer

Great Computer JII-61 user manual

Roland

Roland VersaUv LEF - 12i troubleshooting guide

Lectra

Lectra Alys 120 Maintenance manual

MUTOH

MUTOH Ultima SC-850D Operation instructions

Skycut

Skycut D Series manual

Commodore

Commodore 1520 Technical manual

Supplement for the Basic Operation manual

MIMAKI ENGINEERING CO., LTD. D202064-10

The following functions are added from firmware version 1.80.

Please read this manual and fully understand it before using the device.

If you have any question, contact your local distributor.

This manual correspond to the models as firmware version 1.80 or later.

When turning on the power, you can confirm the firmware version.

Table of Contents

Make the media without uncut area ................................................................................ 2

Other Convenient Settings ............................................................................................... 3

Error message ................................................................................................................... 4

2

Make the media without uncut area

By over wrapping the start point and the end point arbitrarily, you can

make the media without uncut area.

Specify the over cut function (valid/invalid) and the length of the over cut.

If the length of the over cut is set, when cut starts, cut will be performed

from the position to the front by the specified length and the tool will move

up going too far at the end.

1Press the key in the local mode.

2Press the jog key or to select [SET UP] .

3Press the key.

4Press the jog key or to select [OVER

CUT] .

5Press the key.

6Press the jog key or to select OVER

CUT setting.

•Set values : OFF or a value from 0.1 to 1.0mm (0.1mm unit)

7Press the key.

8Press the key twice for terminating this function.

• Setting proper over cut can reduce uncut area of start and end point of a media easy to bend. If too

large value is set, the result may have a rupture

Over cut

part

DATA CLEAR <ENT >

FUNCTION

SET UP <ENT>

ENTER/HOLD

OVER CUT < e n t >

OVER CUT : OF F

ENTER/HOLD

OVER CUT : 0 . 3mm

0.1 ~ 1mm

0.1 ~ 1mm

ENTER/HOLD

END

3

Other Convenient Settings

The setting items are added in the "Other Convenient Settings" of the Operation Manual page.3-59.

The following three items are added.

Function name Outline Setting values

Over Cut Make the media without uncut area. OFF/ 0.1 to 1.0 mm

Start Mode Set the mode after detecting the sheet.

LCL

The mode switches to the

standby condition of the local

mode after detecting the sheet.

REM

The mode automatically

switches to the remote mode

after detecting the sheet.

4

Error message

The error message is added.

If the following message appears, take an appropriate remedy according to the table below.

If the remedy does not work, contact your distributor or an sales office of MIMAKI.

Error message Cause Remedy

ERR51 PINCH POS* The pinch rollers are not on the grit roll-

ers.

Move the pinch rollers onto the grit roll-

ers.

5

6

Memo

7

D202064-10-27052009

All Rights Reserved. NH

© MIMAKI ENGINEERING CO., LTD. FW:1.80