Midea FS40-15AR User manual

ELECTRIC FAN

OWNER’S MANUAL

PEDESTAL FAN

MODEL:FS40-15AR

READ AND SAVE THESE INSTRUCTIONS

Attention: Pictures in the IM are for reference only.

Distributed by JH Electrical and Appliance Ltd

570 Mt Wellington Highway，Mt Wellington，Auckland 1062，New Zealand

+64 9 930 0902

145x210mm 警语3.2mm 单黑

Please read the safe operation rules and instructions carefully

CAUTION

1. If the power cord is damaged, it must be replaced by manufacturer

or its service agent or a similar qualified person in order to avoid

any hazard.

2. Indoor use only.

3. To prevent the risk of electrical shock, do not immerse the unit,

cord or plug in water or other liquid.

4. This appliance is not intended for use by persons (including c

hildren) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety

Young children should be supervised to ensure that they do not

play with the appliance.

5. When the appliance is not in use and before cleaning, unplug the

appliance from the outlet.

6. When the fan has been assembled, the rotor blade guard shall not

be taken off anymore.

7. Correct Disposal of this product

This marking indicates that this product should not be

disposed with other household wastes throughout the EU. To

prevent possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote the

sustainable reuse of material resources.

WARNING

1. Never insert fingers, pencils, or any other object through the grille when fan is

running.

2. UNPLUG the fan when moving from one location to another.

3. Make sure the fan is on a stable surface when operating to avoid overturning.

4. DO NOT use the fan beside window, rain may create electrical hazard.

5. Household use only.

SAFE OPERATION RULES

INSTALLATION INSTRUCTIONS

Name of components

Motor

Motor shaft

Rear grill

Tighten

knob

Pole

Base

Considerate Hint:

Remove ①②③parts from the

component before performing

installation.

Base Installation

Align the column with the

groove on the base and

fix them together using

butterfly screws.

③

①

②

Butterfly screw

Install by

aligning

Lock nut of grill

Lock nut of blade

Blade

Screw the lock nut of grill clockwise,

and in the meantime, fix the rear grill.

Lock nut of blade

anticlockwise,

and then install the

front fan cover.

Pull the blade to rotate after installing,

so as to ensure that the blade can be

normally rotated.

Front grill

Guard

Catch

Align Catch of the Front Guard

with the illustrated position of

the Rear Guard.

Press guards sequentially

with both hands.

Self-Catch Installation.

Front and Rear Guard Installation

Speed / Timer

display

Instructions for remote controller

Instructions for display of body

INSTRUCTIONS FOR USE

MODE

DRIVE PLATE

ON/OFF

PRO/Timer

OSC

Considerate Hint:

1. Install the battery with positive side facing up.

2. Effective Range of Remote Control: within 5 m

distance and 30-degree deflection in front of

Product.

Battery installation

Rear

cover

PUSH OPEN

Instructions for operation of body

INSTRUCTIONS FOR USE

Body key

Tilt Adjustment

Manual

Height

Adjustment

Key

Height Adjustment

Turn counterclockwise and

loosen for performing height

adjustment.

DRIVE

PLATE

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personal if service is needed.

1. Before cleaning and assembling, fan must be unplugged.

2. To ensure adequate air circulation to the motor, keep vents at the rear of the

motor free of dust. Do not disassemble the fan to remove dust.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

4. Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use any of the following as a cleaner: gasoline, thinner.

5. Do not allow water or any other liquid into the motor housing or interior parts.

MAINTENANCE INSTRUCTION

CLEANING

1. Make sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.

Thoroughly remove soap film with dry cloth.

Other manuals for FS40-15AR

Table of contents

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual