Midea MF-16FS18BR User manual

OWNER’S MANUAL

Stand Fan

Model: MF-16FS18BR

READ AND SAVE THESE INSTRUCTIONS

Attention: Pictures in the IM are for reference only.

Read Rules for Safe Operation and Instructions Carefully.

CAUTION

1. If the supply cord is damaged, it must be replaced by manufacturer

or its service agent or a similarly qualified person in order to avoid

a hazard.

2. Indoor use only.

3. To protect against the risk of electrical shock, do not immerse the

unit, cord or plug in water or other liquid.

4. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety

Children should be supervised to ensure that they do not

play with the appliance.

5. When the appliance is not in use and before cleaning, unplug the

appliance from the outlet.

6. When the fan was assembled, the rotor blade guard shall not be

taken off anymore.

7. Correct Disposal of this product

This marking indicates that this product should not be

disposed with other household wastes throughout the EU. To

prevent possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote the

sustainable reuse of material resources. To return your used

device, please use the return and collection systems or contact

the retailer where the product was purchased. They can take this

product for environmental safe recycling.

WARNING

1. Never insert fingers, pencils, or any other object through the grille when fan is

running.

2. Disconnect fan when moving from one location to another.

3. Be sure fan is on a stable surface when operating to avoid overturning.

4. DO NOT use fan in window, rain may create electrical hazard.

5. Household use only.

RULES FOR SAFE OPERATION

Chassis installation:

Install the chassis by

rotating the column.

Considerate Hint:

Before installation,

please remove the fan

leaf locknut and the

mesh hood locknut

from the fuselage.

INSTALLATION INSTRUCTIONS

Name of components

Motor

Cable

Base

Pole

Rear grill

Install by

aligning

Lock nut of grill

Lock nut of blade

Blade

Screw the lock nut of grill clockwise,

and in the meantime, fix the rear grill.

Lock nut of blade

anticlockwise,

and then install the

front fan cover.

Pull the blade to rotate after installing,

so as to ensure that the blade can be

normally rotated.

Front grill

Guard

Catch

Align Catch of the Front Guard

with the illustrated position of

the Rear Guard.

Press guards sequentially

with both hands.

Self-Catch Installation.

Front and Rear Guard Installation

Considerate Hint:

The remote control should be used within 5 meters in front

of the product, and the deviation angle should be within 30°.

Instructions for key of remote controller

INSTRUCTIONS FOR USE

“ON/OFF”key

“TIMER”key

“OSC”key

“SPEED”key

AAA Battery, 1.5v

Use manganese or alkaline batteries of type "AAA". Do not

use rechargeable batteries.

Wind speed key:

short press the key to adjust

the wind speed, long press

the key for 2 seconds to set

the timer.

Instructions for operation of body

INSTRUCTIONS FOR USE

Tilt Adjustment

Manual

Height Adjustment Control Adjustment

OSC

SPEED

ON/OFF

Turn counterclockwise and

take

away for performing

height adjustment.

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed.

1. Before cleaning and assembling, fan must be unplugged.

2. To ensure adequate air circulation to the motor, keep vents at the rear of the

motor free of dust. Do not disassemble the fan to remove dust.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

4. Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use any of the following as a cleaner: gasoline, thinner.

5. Do not allow water or any other liquid into the motor housing or interior parts.

MAINTENANCE INSTRUCTION

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.

Thoroughly remove soap film with dry cloth.

PANDUAN PENGGUNA

Kipas Berdiri

Model: MF-16FS18BR

SILA BACA DAN SIMPAN BUKU PANDUAN INI

Perhatian: Gambarajah-gambarajah dalam panduan pengguna

ini hanya untuk rujukan sahaja.

1. Sekiranya kord kuasa rosak, ia mesti diganti oleh pengilang atau ejen

penyelenggaraannya atau orang berkelayakan yang seumpamanya bagi

mengelakkan sebarang kemalangan.

2. Hanya untuk kegunaan di dalam rumah.

3. Jangan rendamkan unit ini, kord atau plagnya di dalam air atau cecair yang lain bagi

mengelakkan risiko berlakunya kejutan elektrik.

4. Perkakas ini bukan bertujuan untuk digunakan oleh individu (termasuk kanak-kanak)

yang kurang upaya fizikal, deria atau mental, atau kurang pengalaman dan

pengetahuan melainkan pengawasan atau arahan penggunaan perkakas ini telah

diberi oleh orang yang bertanggungjawab ke atas keselamatan mereka.

Kanak-kanak hendaklah diawasi bagi memastikan mereka tidak mempermainkan

perkakas ini.

5. Sila cabut plag perkakas dari soket jika perkakas ini tidak digunakan atau sebelum

kerja pembersihan.

6. Setelah kipas ini dipasang, penghadang bilah pemutar tidak boleh ditanggalkan sama

sekali.

7. Cara pelupusan produk ini yang betul.

Tanda ini menunjukkan bahawa produk ini tidak boleh dilupuskan dengan

sisa isi rumah lain di seluruh negara-negara EU. Untuk mengelakkan kebahayaan

yang mungkin dibawa terhadap alam sekitar atau kesihatan manusia daripada

pelupusan sampah yang tidak terkawal, kitar semula produk ini secara

bertanggungjawab demi menggalakkan penggunaan semula sumber bahan secara

berterusan. Untuk mengembalikan perkakas terpakai, sila gunakan sistem

pemulangan dan pengumpulan atau hubungi kedai peruncit di mana produk ini dibeli.

Mereka boleh membawa produk ini untuk dikitar semula dengan cara mesra alam.

Sila baca arahan-arahan keselamatan pengendalian dan penggunaan dengan teliti.

AWAS

AMARAN

ARAHAN KESELAMATAN PENGENDALIAN

1. Jangan masukkan jari, pensil, atau apa-apa objek lain menerusi penghadang

ketika kipas ini sedang berputar.

2. Tanggalkan plag sebelum kipas ini dipindah dari satu tempat ke tempat lain.

3. Pastikan kipas ini diletakkan di atas permukaan yang stabil ketika beroperasi bagi

mengelakkan ia daripada terbalik.

4. Jangan letakkan kipas ini di tepi tingkap kerana air hujan mungkin menimbulkan

kebahayaan.

5. Hanya untuk kegunaan di dalam rumah.

Pemasangan tapak:

Pasang tapak dengan

memutar tiang padanya.

Petua:

Sebelum pemasangan,

sila tanggalkan nut

pengunci bilah kipas

dan nut pengunci

penghadang dari badan

mesin.

ARAHAN-ARAHAN PEMASANGAN

Nama Komponen-komponen

Motor

Kabel

Tapak

Tiang

Penghadang

belakang

Dipasang

dengan

sejajarkan

lubangnya

Table of contents

Languages:

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual