Midea FS40-15FR User manual

ELECTRIC FAN

OWNER’S MANUAL

16" STAND FAN

MODEL: FS40-15FR

READ AND SAVE THESE INSTRUCTIONS

Attention: Pictures in the IM are for reference only.

GD Midea Environment Appliances MFG.Co.,Ltd.

No.28, Dong Fu Road, Hesui East Industrial Area, Dong Feng Town,

Zhongshan, Guangdong 528425 P.R.China

145x210mm

Read Rules for Safe Operation and Instructions Carefully.

CAUTION

1. If the supply cord is damaged, it must be replaced by manufacturer

or its service agent or a similarly qualified person in order to avoid

a hazard.

2. To protect against the risk of electrical shock, do not immerse the

unit, cord or plug in water or other liquid.

3. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be

supervised to ensure that they do not play with the appliance.

4. When the appliance is not in use and before cleaning, unplug the

appliance from the outlet.

5. Keep electrical appliances out of reach from Children or infirm

persons. Do not let them use the appliances without supervision.

6. When the fan was assembled, the rotor blade guard shall not be

taken off anymore

- Prior cleaning unplug the fan.

- The rotor guard shall not be dissembled/opened to clean the

rotor blades.

- Wipe the fan enclosure and rotor blade guard with a slightly

damp cloth.

WARNING

1. Never insert fingers, pencils, or any other object through the grille when fan is

running.

2. Disconnect fan when moving from one location to another.

3. Be sure fan is on a stable surface when operating to avoid overturning.

4. DO NOT use fan in window, rain may create electrical hazard.

5. Household use only.

RULES FOR SAFE OPERATION

PART FIGURE

Note: All the pictures in this manual are for

explanation purpose only. Any discrepancy

between the real object and the illustration

in the drawing shall be subject to the real

subject.

Front grill Fan blade

Plastic nut

Tighten

Spinner

Loosen

Rear grill

Internal Pole

Extension Pole

Motor shaft

Motor housing

Circlip

Thumb

screw

Fasten

Chassis

Height

adjustment ring

7-shape Bolt

Push button

1. Unscrew the 7-shape Bolt from the Extension Pole. (Fig.1)

2. Insert the extension pole into the chassis and tighten the 7-shape Bolt (Fig.2)

3. From the extension pole loosen the height adjustment ring and adjust the internal

pole to the desired height. (Note: If you can’t find the internal pole, it must inside

the extension pole. You can pull it out from the extension pole.) (Fig.3)

4. To attach the head unit to the internal pole, loosen the thumb screw on the bottom

of the head unit. Place the head unit on the internal pole and tighten the thumb

screw in alignment with the groove on the internal pole. (Fig.4)

CAUTION: Height adjustment ring must be fully fastened before the assembly of the

motor section to the internal pole.

5. Usage of the remote control hook: make the straight face of hook up, clip the hook

to the inner tube along with the opening, the hook can be moved up and down

along the tube (Fig.1). The hook of the remote control may be linked to the

hole for storage when not in use. (Fig.2)

ASSEMBLY OF CHASSIS & COLUMN UNIT

Remote Control Hook

Internal

Pole

GRILL & FAN BLADE ASSEMBLY

1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the

plastic nut counterclockwise to remove both of them. Fix the rear grill to the

motor then tighten the plastic nut again. (Fig.7)

2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove

of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig.8)

3. Fix the front grill and the rear grill with circlip clip and then fasten the circlip clip

and lock the screw and nut. (Fig.9)

Fig.7 Fig.8 Fig.9

Annulargroove

Mountinghole

Thumb screw

Fig.5 Fig.6

ig.3

Looseen

Fig.4

Fig.1Fig.2

Straight face

Hook

Opening

Hook hole

Fig.12

OPERATING INSTRUCTION

I. Remote Controller (Fig.10)

a. KEY INSTRUCTION

1. “ ” ON/OFF KEY

The “ ” key is for switching on the fan .The fan will

be started at normal wind.

Press the “ ” key if the fan needs to switch off.

2. “ ” SPEED KEY

When the fan started, press this key repeated, the fan will work with “0-1-2-3(Off-

Low-Medium-High)” circulatory.

3. “ ” TIMER KEY

When this key is touched repeatedly or kept in pressed state, the time to be set for

air delivery increased step by step of each 0.5 hour and sums to 7.5 hours in 15 steps.

For instance, if the fan operation is required to be set for 5.5

hours, this key must be touched repeatedly so that the pilot

lamps for 0.5, 1 and 4 hours lighten together. It means that

the set time is 0.5+ 1+ 4= 5.5 hours.

The time setting indicated by the pilot lamp will decrease

gradually by a unit of 0.5 hour.

Don’t press the TIMER key when the fan is required to operate

continuously. At the moment all pilot lamps don’t light.

4. “ ” OSC KEY

After the fan is started, press this key to oscillate the fan, and

stop the oscillation at desired direction by pressing again. By

rotating the fan head by hand, you can get wider oscillation angle.

5. “ ” MODE KEY

Press this key to select mode. The sequence is normal, natural and sleep when this

key being touched repeatedly or continuously. The light can indicate mode state.

Normal wind

Press the “mode” key to select the normal wind, then press the “speed” repeatedly

to choose 3 speed.

Natural wind

Press the “mode” key to select the natural wind, then press the “speed” repeatedly

to choose 3 speed.

Fig.10

Fig.11

Sleep wind

Press the “mode” key to select the sleep wind, then press the “speed” repeatedly

to choose 3 speed.

6. “ ” SILENCE KEY

In the state of non-silence, press silence button, the fan would be in silent state and

the silence icon is lightened, while the indicator icons of the other wind types and

wind levels would turn off. In silent state, press wind type button, blast volume + and

– buttons, there would be no response, while other buttons could respond normally.

Press silence button again to quit and the fan would return to the previous working

state. The silence icon turns off and 00 is displayed on the digital screen.

b. BATTERIES

(battery not included in the packing)

(1) Slide the battery compartment Cover.

(2) Insert the batteries, and make sure that the

batteries are placed as shown in the Fig.10.

(3) Slide back the battery cover.

NOTES: Use manganese or alkaline batteries of

type "AAA". Do not use rechargeable batteries.

c. BATTERY WARNING AS BELOW

1. “Do not dispose of batteries in fire, batteries may

explode or leak.”

2. -Do not mix old and new batteries.

3. -Do not mix alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium) batteries.

d. REMOTE CONTROLLER OPERATION

Point the remote controller at the receptor on body of the fan and press the desired

button. The remote controller will work at distances of up to roughly five meters and

the angle of 30 degree included between right and left from the receptor.

The batteries must be removed from the remote controller before it is scrapped and

that they are disposed of safely.

e. OVERHEAT PROTECTION OF THE MOTOR

The windings of the motor have a thermal-fuse that burns out and the fan switches

off and temperature of the motor is no longer going up so that plastic parts of the fan

don’t subject to deformation so far so to be burned by the overheat if the motor is

overheat for any unexpected reason.

AAA Battery, 1.5v

II. Control Panel (Fig.12)

These keys of the control panel may be used as same as of the remote controller.

III. Tilt Adjustment

To adjust the air flow upward or downward, push the grilles lightly to the desired

direction.

IV. Height Adjustment

The height of the fan can be adjusted by loosening the height adjustment ring

carefully raising or lowering the fan and firmly re-tightening the height adjustment

ring.

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified

service personnel if service is needed.

1. Before cleaning and assembling, fan must be unplugged.

2. To ensure adequate air circulation to the motor, keep vents at the rear of the

motor free of dust. Do not disassemble the fan to remove dust.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

4. Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use any of the following as a cleaner: gasoline, thinner.

5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

MAINTENANCE INSTRUCTION

1. Be sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.

Thoroughly remove soap film with dry cloth.

DISPOSAL：Do not dispose of electrical appliances as unsorted

municipal waste, use separate collection facilities. Contact your

local government for information regarding the collection systems

available. If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get into the food chain,

damaging your health and well-being.

Table of contents

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual