USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 6
Version: 0711
ET 572
Page 6 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
The machine should only be operated with an
interstaged maintenance unit (filter, water extractor, oil
vaporizer, manometer; not contained within the scope
of delivery) since dirt and water in the pressurized air
can lead to damages. We recommend suspending the
stapling machine on a balancer (weight equalization),
for example, the B 2/4. A spiral compressed air hose
DS 75 is used to supply the compressed air.
5 Functionality description
The machine is placed on the cardboard box to be stapled and then triggered. The
trigger time should not be less than 0.5 seconds, since this could otherwise lead to
malfunctions. The staple is hereby ejected from the staple opening and penetrates the
box, where it is bent and anchored.
The machine may only be lifted from the cardboard box after the
staple has been bent in the box meaning that the staple has
completely been ejected from the machine, since this could
otherwise lead to malfunctions.
The stapling will be more rigid if the machine is pressed onto
the cardboard box harder. The nose and the two markings on
the head piece to serve as a guide and mark the ejection point
of the staple. The machine should be pressed onto the
cardboard box in a slightly top-heavy way.
The penetration depth of the staples is determined by the
respective staple type. It is not intended for adjustments to be
made on the machine.
6 Fundamental notes on the work technique and handling
Before the operator starts to use the machine he must acquire information about the application
scenario and check if the machine is suitable for it.
Carefully follow all safety instructions!
Check to make sure that the stapling machines are not damaged and that they can
be operated in a safe way.
The operating safety of the stapling machine must be checked before starting the work and constantly
rechecked!
Safety devices may not be bypassed or rendered ineffective!
Keep your work area in order.
Disorder in the work area can cause accidents.
•Use only ORIGINAL TOP staples that are made specifically for this quality equipment. Third-party
staples can cause considerable damage and malfunctions.
