Messoa LPR615 User manual

This manual suits for next models

1

Table of contents

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

www.messoa.com

(IR) Bullet LPR/ANPR Network

Camera

P32-615020-000A

Quick Start Guide

Quick Start Guide 1

English

Safety Instructions

Make sure the supplied voltage meets the power consumption requirements

of the camera before powering the camera on. Incorrect voltage may cause

damage to the camera.

The camera should be protected from water and moisture, excessive heat,

direct sunlight, and cold.

This installation should be made by a qualied service person and should

conform to all local codes.

Unplug the camera during lightning storms or when unused for long periods

of time.

Copyright

No part of this document may be reproduced or transmitted in any form or by

any means, electronic or mechanical, for any purpose, without the express written

permission of MESSOA.

© 2012 All rights reserved.

Disclaimer

Specications and information contained in this document are presented as

accurately as possible as of the time of release, but are not guaranteed to be

entirely free of error. MESSOA assumes no responsibility for errors or omissions

that may appear in this document and reserves the right to change this

publication at any time without obligation to notify anyone of such revisions or

changes.

2 Quick Start Guide

Compliance

This equipment complies with the requirements as listed below:

FCC Part 15 Class A

CE: 2004/108/EC-Electromagnetic Compatibility (EMC) directive based on

EN55022: 2010 Class A, EN61000 and EN55024 standard.

WEEE

Waste Electrical and Electronic Equipment

Correct disposal of this product (applicable in the European Union

and other European countries with separate collection systems). This

product should be disposed of, at the end of its useful life, as per

applicable local lows, regulations and procedures.

Quick Start Guide 3

English

1. Introduction

This quick start guide is intended to provide installers with basic instructions

for installing and conguring the Network Trafc Camera. For more detailed

information of using and conguring the product, please refer to the User Manual

available on the provided CD-ROM.

1.1 Package Contents

Check the items supplied with your network trafc camera against the following

list. If any of the following items is missing, please contact your dealer.

Printed Quick Start Guide x1

Camera power adaptor x1

Hexagonal wrench x1

Bracket pack (with 4 screws) x1

4 Quick Start Guide

1.2 Hardware Overview

Part Names

Tempered

Glass

Top Cover

Bottom

Cover

Bracket

Pan Adjustment

Screw

Tilt Adjustment

Screw

The gure above is the illustration of the housing, which may be used

with most of ICR real Day and Night cameras.

Dimensions

Unit: mm

175 460

147

286

Quick Start Guide 5

English

2. Installation

Installation of the Camera and Bracket

Wiring Cables

1. Take the bracket from the box and put the power cable and Ethernet cable

through the bracket and then x the bracket to the wall (Loose the screws of

the bracket for easy assembly if necessary).

2. Take out the housing and open the side cover with the hexagonal wrench.

6 Quick Start Guide

3. Put the Ethernet cable through the bottom of the housing and let it pass

from the hole. Make connection of power by plugging the terminal block into

the power socket.

TipCautionWarning

Note

For waterproof installation, use the provided spacer and stick it right by the outlet.

Then install the three glands to get the power cable and Ethernet cable pass

through the hole of the gland covers.

Quick Start Guide 7

English

4. Open the side cover and you can see the housing inner part as the gure

shown below.

LPR615 Inner Part Denition

Fan

Camera

I/O board

8 Quick Start Guide

LPR610 Inner Part Denition

Fan

Camera

IR LED driver board

I/O board