MATSONIC MS8127C User manual

Important Information

This publication, including all photographs, illustrations and

software, is protected under international copyright laws, with all

rights reserved. Neither this manual, nor any of the material

contained herein, may be reproduced without the express

written consent of the manufacturer.

Version 1.0

Disclaimer

The information in this document is subject to change without

notice. The manufacturer makes no representations or

warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for

any particular purpose. Further, the manufacturer reserves the

right to revise this publication and to make changes from time to

time in the content hereof without obligation of the manufacturer

to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of

Microsoft Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

Other product names used in this manual are the properties of

their respective owners and are acknowledged.

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of

the following measures:

!Reorient or relocate the receiving antenna.

!Increase the separation between the equipment and the

receiver.

!Connect the equipment onto an outlet on a circuit

different from that to which the receiver is connected.

!Consult the dealer or an experienced radio/TV technician

for help.

Shielded interconnect cables and a shielded AC power cable

must be employed with this equipment to ensure compliance

with the pertinent RF emission limits governing this device.

Changes or modifications not expressly approved by the

system’s manufacturer could void the user’s authority to operate

the equipment.

iii

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is

subject to the following conditions:

!This device may not cause harmful interference, and

!This device must accept any interference received,

including interference that may cause undesired

operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the

Canadian Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les

exigences du Réglement sur le matériel brouilieur du Canada.

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and verify the checklist of items that are shipped

with the package.

Installation

Use the Installation Chapter to learn how to install the

mainboard and get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to install the software

drivers and support programs that are provided with this

mainboard.

Contents

Important Information i

Disclaimer i

Trademark Recognition ii

Federal Communications Commission (FCC) ii

Declaration of Conformity iii

Canadian Department of Communications iii

About the Manual iv

CHAPTER 1: INTRODUCTION 1

Welcome 1

Checklist 2

Recommendations 2

Features 3

CHAPTER 2: INSTALLATION 7

Quick Installation Table 7

Quick Jumper Setting Reference 8

Before You Begin 11

Static Electricity 11

Choosing a Case 12

How to Set Jumpers 13

Preparing the Mainboard 14

Mainboard Guide 14

I/O Ports Side View 16

Check the Jumper Settings 17

Installing the Mainboard in a Case 19

Connecting Internal Components 20

Installing Other Hardware 22

Installing the Processor 22

Install the Memory Modules 24

Installing a Hard Disk Drive and CD-ROM 26

Installing a Floppy Diskette Drive 29

Using the Expansion Slots 30

Other Options 32

Making External Connections 34

External Connector Color Coding 35

CHAPTER 3: SETUP 37

About the Setup Utility 37

Entering the Setup Utility 38

BIOS Navigation Keys 39

Using BIOS 40

How to Flash a New BIOS 41

Standard CMOS Features Option 42

Advanced BIOS Features Setup Option 45

Advanced Chipset Features Option 48

Integrated Peripherals Option 53

Power Management Setup Option 56

PnP/PCI Configuration Option 62

PC Health Status Option 64

Frequency Control Option 65

Load Fail-Safe Defaults Option 66

Load Optimized Defaults Option 66

Set Supervisor and User Passwords 67

Save & Exit Setup Option 68

Exit Without Saving Option 68

CHAPTER 4: SOFTWARE 69

About the Software 69

Folders for this Mainboard 69

Utility Folder Installation Notes 69

Running the Support CD-ROM 70

Utility Folder Installation Notes 70

Mainboard (MS8127C) Installation Notes 71

APPENDIX: JUMPER SETTING REFERENCE 72

Jumper Setting Quick Reference 72

Welcome

Congratulations on purchasing the MS8127C mainboard. The

MS8127C is a ATX mainboard that uses a 4-layer printed circuit

board and measures 305 mm x 220 mm. The mainboard has a

Socket 462 to accommodate AMD Athlon (K7) processors that

support frontside bus (FSB) speeds up to 200 MHz. The

MS8127C is installed with the VT8363 (NB)/ VT82C686A (SB)

chipset and built-in 3D sound that features the AC 97 audio

codec.

The mainboard delivers high-level performance with a 4xAGP

(Accelerated Graphics Port) slot and two PCI Bus Master Ultra

DMA (UDMA) ports that support up to four ATAPI (AT Attachment

Packet Interface) devices. The PCI IDE also supports PIO Mode 3

and 4, UDMA33/66 IDE, and an ATAPI CD-ROM.

The mainboard accommodates PC 100/133 SDRAM

(Synchronous DRAM) or VCM (Virtual Channel Memory) up to

1.5 GB using three 3.3V unbuffered DIMM modules. The

mainboard attains the highest reliability by supporting ECC

(Error Checking and Correction) memory protection, enabling

the mainboard to achieve superior data integrity and fault-

tolerance with respect to memory errors while running

applications.

Other features include a built-in PCI 3D sound system that supports

the AC 97 audio codec. The mainboard has a full set of I/O ports,

such as dual channel PCI EIDE interfaces, a floppy controller, two

FIFO serial port connectors, an EPP/ECP-capable bi-directional

parallel port connector, a dual USB (Universal Serial Bus)

connector, and PS/2 keyboard and mouse connectors.

One AGP slot, five PCI local bus slots and an audio modem riser

(AMR) slot provide expandability for add-on peripheral cards.

This chapter contains the following information:

!Checklist comprises a list of the standard and optional

components that are shipped with this mainboard

!Recommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance

from this product

!Features highlights the functions and components that

make this one of the best value mainboards on the

market

Checklist

Compare the contents of your mainboard package with the

standard checklist below. If any item is missing or appears

damaged, please contact the vendor of your mainboard package.

Standard Items

!One mainboard

!One diskette drive ribbon cable and bracket

!One IDE drive ribbon cable and bracket

!This user’s manual

!Software support CD-ROM disc

Recommendations

This mainboard automatically determines the CPU clock

frequency and system bus frequency for the kind of processor

you install. You may be able to change these automatic settings

by making changes to the settings in the system Setup Utility.

We strongly recommend that you do not overclock the

mainboard to run processors or other components faster than

their rated speed.

Warning: Overclocking components can adversely affect the

reliability of the system and introduce errors into your system.

Overclocking can permanently damage the mainboard by generating

excess heat in components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges

of static electricity. Handle the board carefully holding it by the

edges. Don’t flex or stress the circuit board. Keep the board in

its static-proof packing until you are ready to install it. Follow the

static guidelines given at the beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of

processors that can be installed, and the high level of integration,

which includes built-in audio, video, and communications.

High-end Processors

Functioning as a platform for a high-end PC, the MS8127C

features a Socket 462 accommodating AMD Athlon processors

that support 64/256 KB L2 OnChip cache, and 100/200 MHz

hostbus/core speed.

The MS8127C supports 200 MHz frontside bus (FSB).

VIA Chipset

This board features the VT8363 chipset from VIA. The VT8363

chipset is designed for high-end desktops and workstations and

provides 2-way multiprocessing (SMP), ATA-66, 4xAGP and

DRAM support.

The VT82C686A I/O chip makes a direct connection between

the graphics system, the IDE controller, and the PCI bus. It uses

Accelerated Hub Architecture to effectively double the bandwidth

between these components enabling more lifelike audio and

video. The VT82C686A I/O chip includes an integrated audio

codec controller (AC 97) that lets the processor more effectively

decode sound generated by the integrated audio system or the

integrated fax/modem.

Inexpensive Memory

The board has three DIMM sockets for the installation of 168-pin,

3.3V non-buffered DIMM memory modules. The DIMM memory

modules use SDRAM memory chips. The MS8127C mainboard

supports a memory bus of 100/133 MHz.

Each installed memory module can be populated with from 32

MB to 512 MB of memory; a maximum of 1.5 GB memorycan

be installed. The integrated video system uses shared memory

architecture, so you must reserve some of the installed memory

as video memory using the system BIOS. You must install at

least one module, but it makes no difference which slot you use

to install the module.

4xAGP Graphics Adapter Slot

The mainboard includes an 4xAGP slot that provides four times

the bandwidth of the original AGP specification. AGP technology

provides a direct connection between the graphics sub-system

and the processor so that the graphics do not have to compete

for processor time with other devices on the PCI bus. The AGP

design allows the graphics controller to use part of the main

memory when it needs it, for example, to handle the very large

texture maps required by virtual reality and 3D video games and

applications.

AC 97 Audio codec

The AC 97 Audio codec is compliant with the AC 97 2.1

specification, and supports 18-bit ADC (Analog Digital Converter)

and DAC (Digital Analog Converter) resolution as well as 18-bit

stereo full-duplex codec with independent and variable sampling

rates. Further features include support for four analog line-level

stereo inputs.

Expansion Options

The MS8127C mainboard is pre-installed with features such as

audio that normally require add-in cards. The five 32-bit PCI

slots and the AMR slot provide plenty of expansion potential.

The MS8127C PCI slots support UDMA 33/66 bus mastering.

Table of contents

Other MATSONIC Motherboard manuals

MATSONIC

MATSONIC MS7117C User manual

MATSONIC

MATSONIC MS9087C User manual

MATSONIC

MATSONIC MS7127C User manual

MATSONIC

MATSONIC MS7308E Series User manual

MATSONIC

MATSONIC MS7192S User manual

MATSONIC

MATSONIC MS9027C User manual

MATSONIC

MATSONIC MS8188E Series User manual

MATSONIC

MATSONIC MS7080SG User manual

MATSONIC

MATSONIC MS9147C Series User manual

MATSONIC

MATSONIC MS8328E Series User manual

MATSONIC

MATSONIC MS6391E User manual

MATSONIC

MATSONIC MS7380SG User manual

MATSONIC

MATSONIC MS9138E Series User manual

MATSONIC

MATSONIC MS9047C Series User manual

MATSONIC

MATSONIC MS9017C User manual

MATSONIC

MATSONIC MS8318E Series User manual

MATSONIC

MATSONIC MS9158 Series User manual

MATSONIC

MATSONIC MS7023D User manual

MATSONIC

MATSONIC MS7012D User manual

MATSONIC

MATSONIC MS7101C User manual

MATSONIC

MATSONIC MS-5120 User manual

MATSONIC

MATSONIC MS-7090S User manual

MATSONIC

MATSONIC MS7157C User manual

MATSONIC

MATSONIC MS7057CT User manual

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual