Lorex SG6352 User manual

MODEL: SG6352

2.4 GHz WIRELESS COLOR

SECURITY SYSTEM WITH

WEATHER RESISTANT* CAMERA

Instruction Manual

www.lorexcctv.com

English Version 1.0

Before operating the system, please read this manual

thoroughly and retain it for future reference.

This product broadcasts over public airwaves and its video and audio signals may be

intercepted without your consent.

* IP44 rated for Indoor and Outdoor use. Not recommended for direct exposure to water, rain or snow.

Explanation of two Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage“ within the

product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in

the literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON

THE BOTTOM OF THE SYSTEM.

WARNING: To prevent fire or shock hazard, do not expose this unit to

rain, water, or wet locations. Do not insert any metallic object

through the ventilation grills.

FCC CLASS B NOTICE

Note:

This equipment has been tested and found to comply with the limits For a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, (which can be determined by turning the equipment off and on), the

user is encouraged to try to correct the interference by one or more of the following

measures:

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

• Reorient or relocate the receiving antenna

• Connect the equipment into an outlet on a circuit different from that to which

other devices may be connected.

• Consult the dealer or an experienced radio or television technician for help.

SAFETY INSTRUCTIONS

IMPORTANT SAFEGUARDS

All the safety and operating instructions should be read before the

system is operated, and retained for future reference.

1. HEED WARNINGS - All warnings on the appliance and in the operating

instructions should be adhered to.

2. FOLLOW INSTRUCTIONS - All operating instructions should be

followed.

3. WATER AND MOISTURE - Do not use this video product near water –

for example, a bath tub, wash bowl, kitchen sink, laundry tub or

swimming pool, or in a wet basement.

4. POWER SOURCES - This product should be operated only from the type

of power source indicated on the marking label.

5. OVERLOADING - Do not overload outlets and extension cords, which

can result in a risk of fire or electric shock.

6. SERVICING - Do not attempt to service this product yourself. Opening or

removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing or repairs to qualified service personnel.

7. DAMAGE REQUIRING SERVICE - Unplug this product from the wall

outlet and refer servicing or repairs to qualified service personnel under

the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions.

e. If the product has been dropped or the cabinet has been damaged.

f. When the product exhibits a distinct change in performance.

8. REPLACEMENT PARTS - When replacement parts are required, be

sure the service technician has used replacement parts that are

specified by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

9. SAFETY CHECK - Upon completion of any service or repairs to this

video product, ask the service technician to perform safety checks to

determine if the video product is in proper operating condition.

10. An appliance and cart combination should be moved with care.

Do not place this equipment on an unstable cart, stand, or table.The

equipment may fall, causing serious injury to a child or adult, and

serious damage to the equipment. Wall or shelf mounting should

follow the manufacturer's instructions and should be done with

a mounting kit approved by the manufacturer.

TABLE OF CONTENTS PAGE

iii

INTRODUCTION & FEATURES………………………………………

SYSTEM INCLUDES…………………………………………………..

CONTROLS AND FUNCTIONS

Wireless Camera….......…….......….……………………..……...

Wireless Receiver...……..............................……….……...……

INSTALLATION OF WIRELESS CAMERA………………………….

INSTALLATION OF WIRELESS RECEIVER

Operation with TV (Using RCA Cables)......……………….…....

Operation with TV (Using Coaxial Cable) ..............…..……......

SYSTEM OPERATION

Multiple Cameras / Auto Scanning…………………………………

Auto/Manual Options / Selectable Settings………………………

TROUBLE SHOOTING ..............................................………..…...

TECHNICAL SPECIFICATIONS ....................................................

CARE & MAINTENANCE……………………………..……………….

INTRODUCTION:

Thank you for purchasing the 2.4 GHz Wireless Color Camera & Receiver System.

This system turns your TV into a Video Security System, providing instant

protection in your home or office. Avoid the hassle of running wires. This system is

easy to install and operate for immediate applications.

The system is capable of connecting up to 4 cameras (additional cameras sold

separately) with the option to automatically scan between locations.

To learn more about this 2.4GHz Wireless Camera & Receiver System and our

complete range of CCTV products, please visit our website at:

www.lorexcctv.com

FEATURES:

• Turns your TV into a Video Security System

• Camera rated IP44* for Indoor and Outdoor use

• Listen-in audio

• 300 ft Wireless Transmission (open space)

• 2.4 GHz Wireless Transmission

• Crystal clear Video and Stereo audio

• 4 Channel Wireless System

• Record picture to any standard VCR

• Automatic IR illumination provides B&W video images in low light conditions**

• Bonus clip-on stand included for quick mounting application

* IP44 rated for Indoor and Outdoor use. Not recommended for direct exposure to water, rain or snow.

** IR illumination range of 6ft. under ideal conditions. Objects at or beyond this range may be partially

or completely obscured, depending on the camera application.

SYSTEM INCLUDES:

1 - 2.4 GHz Color Wireless Camera

Owner’s Manual

Also includes:

2 – 9V DC Adapters

1 – RCA Audio/Video Cable

1 – Coaxial Cable

1 - 2.4 GHz Wireless Receiver

1 - Clip-on Stand1 - Wall Mounting

Bracket

CONTROLS & FUNCTIONS

1. Microphone – Built-in condenser microphone provides listen-in audio

capability from camera to monitor

2. Lens – B&W CMOS Image Sensor

3. 6 Infrared LED’s – Enhances the picture quality in low light conditions*

4. Channel Selector/Power Button – Selects channels 1-4. Holding this button for 3

seconds turns the power ON/OFF (by default the camera is ON).

5. Bracket – Plastic bracket connects to camera for mounting to walls,

ceilings or table

6. DC IN Jack – Connects to the 9V DC adapter.

7. Sunshade Visor – Protects camera from the elements and blocks the camera

from the direct glare of the sun.

8. LED Channel Indicator – Shows the channel (1-4) that the camera is set to.

Front/Side View

* IR illumination range of 6ft. under ideal conditions. Objects at or beyond this range may be

partially or completely obscured, depending on the camera application.

WIRELESS CAMERA

WIRELESS RECEIVER

REAR VIEW

BOTTOM VIEW

910

56 78

1. Auto/Manual Button – Used to activate/deactivate auto sequencing

2. Channel Selector Button – Used to manually switch channels from 1-4

3. LED Channel Indicators – Indicator light shows selected channel

4. 2.4 GHz Antenna – High gain dipole antenna receives audio and video

signal from the wireless camera

5. Video Output Jack (Yellow) – RCA jack for video output connector

(when using RCA connector)

6. Audio Output Jacks L (White) & R (Red) – RCA jacks for audio

output connector (when using RCA connector)

7. RF Out Jack (To TV) – Connects the receiver to a TV using the supplied

coaxial cable (alternative to RCA cable connection).

8. DC IN Jack – Connects to the power supply of the receiver

9. ON/OFF Power Switch – Ensure this switch is set to OFF before

plugging the system into an electrical outlet

10.Channel 3/4 Selector Switch – Used to view picture on television when

using coaxial cable (preset to channel 3)

CONTROLS & FUNCTIONS

TOP VIEW

1. Attach the stand base to the wall or ceiling where you want to install the

camera. Locate a wall stud or ceiling, and secure the bracket using the

three supplied screws.

2. Secure the camera to the bracket by sliding the camera socket over the stand, and

fasten it in place with the supplied screw.

3. Connect the supplied 9V DC adapter to the DC IN jack at the rear

of the camera, and plug it into an electrical outlet. Make sure the adapter connected

to the camera is labeled camera. You can turn the camera ON/OFF by holding the

Channel for 3 seconds.

To 9V Power

Adapter

Camera mounted

Wall

OPTION #1 – Permanent Wall Mount

OPTION #2 – Temporary Mounting

1. Connect the clip-on stand

onto any object.

STEP 1:

INSTALLATION OF CAMERA

CONNECTING THE RECEIVER TO A TV

INSTALLATION OF RECEIVER

STEP 2:

Ensure the Power Switch on the Receiver is turned OFF before

proceeding with the following steps.

NOTE

1. Place the wireless receiver near your television (or monitor).

2. Connect one end of the RCA cables to the Audio/Video output jacks at the

back of the receiver. Plug the other end of RCA cables into the

Audio/Video In jacks on your television. Be sure the yellow, red and white

plugs match the yellow, red and white jacks on both the receiver and TV.

3. Connect one end of the supplied 9V AC adapter into the DC IN

jack at the back of the receiver; the other end into an electrical outlet. Turn the

receiver ON. The system is defaulted to channel 1.

4. Turn your TV to AX (Aux. Mode or TV/Video) to view the camera picture on your

TV.

5. Adjust the antenna on the receiver if necessary for optimum viewing.

For optimum viewing reception you may need to change the

channels of both your camera and receiver to the same

channels between CH 1 – CH 4

NOTE

You have two options to connect the Receiver: A) Using RCA Cables (see below),

or B) Coaxial Cables, please refer to page 7 of this manual.

Back of Receiver Television

Electrical Outlet

Table of contents

Other Lorex Security System manuals

Lorex

Lorex L224V161C4 User manual

Lorex

Lorex SG14S1022P User manual

Lorex

Lorex SILVANIA SY15F6584 User manual

Lorex

Lorex L14Q684C User manual

Lorex

Lorex LW2002B Series User manual

Lorex

Lorex LW2301 Series User manual

Lorex

Lorex Vantage Edge+ CVC6996 User manual

Lorex

Lorex L19LD1600 Series User manual

Lorex

Lorex IPSC2260P User manual

Lorex

Lorex LW2702 series User manual

Lorex

Lorex LHWF1000 Series User manual

Lorex

Lorex LH316501C8 User manual

Lorex

Lorex SG21CD7484UQ-A80 User manual

Lorex

Lorex SG21FD3044-161 Operator's manual

Lorex

Lorex SG19LD804-161 Installation guide

Lorex

Lorex Vantage User manual

Lorex

Lorex SG21FD3044-161 Mounting instructions

Lorex

Lorex L15LD420 SERIES User manual

Lorex

Lorex SHS-2S6183W User manual

Lorex

Lorex DVM2050 User manual

Lorex

Lorex LHB926 Series Instruction Manual

Lorex

Lorex SG17LD800 User manual

Lorex

Lorex L204 User manual

Lorex

Lorex L17LD420 Series User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual