Lorex SG21CD7444UQ-A80 User manual

www.lorexcctv.com

SG21CD7444UQ-A80 Page 1

Version 1.01

STEP 1

SETTING UP YOUR MONITOR FIRST

Package Contents

3Turn the Master power switch located at

the back of the monitor ‘ON’. 4Press the Power button. Wait for the

monitor to check internal settings.

The four camera images will now

appear.

For detailed

monitor setup

information,

please refer

to your

system

owners

manual.

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, speciﬁcations and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.

NOT INCLUDED: BROADBAND ROUTER, COMPUTER & ETHERNET NETWORK CABLE

BACK OF THE MONITOR

FRONT OF THE MONITOR

1 - 21” Colour Monitor with Built-in Digital Video Recorder

1 - 80 GB Hard Disk Drive (installed inside hard drive bay)

3 - Colour Cameras

1 - Colour Dome Camera

3 - Camera stands

4 - 56 ft Extension Cables for camera

1 - USB cable

1 - Power Cord

1 - mCAM Security Monitoring Software CD

1 - Owners Manual

1 - Quick Set-up Guide

10:00

STEP 1 SHOULD TAKE

APPROXIMATELY 5 - 10

MINUTES TO COMPLETE

1Connect cameras to the monitor

BACK OF THE MONITOR

4 Color cameras are included with the Observation System. These cameras have

a single cable, and receive power directly from the Observation System.

1. Connect the female end of the supplied 57’ extension’ cable to the camera

2. Connect the male end of the supplied 57’ extension cable to an open DIN

channel on the back of the Observation System. Continue connecting

additional DIN cameras.

NOTE: The arrow mark on top of the 6 PIN camera

cable(s) should face UP while inserting the 6 PIN

camera cable(s) to the Monitor’s 6 PIN connector(s).

2Connect one end of the power adapter (standard

power cable) to the monitor, the other end to an

electrical outlet.

BACK OF THE MONITOR

www.lorexcctv.com

SG21CD7444UQ-A80 Page 2

Version 1.01

STEP 2

SETTING UP LOCAL AND REMOTE VIEWING ON YOUR PC

1Connect one end of the USB Cable (included) to the monitor,

the other end to the computer.

4Follow the CD dialog boxes to install the

mCAM Security monitoring software.

Please refer to the mCAM Manual included

with your product for further details on

installation, use and remote viewing.

2Connect one end of

the ethernet cable to a

broadband router (not

included) and the other

end to the back of the

computer.

3Insert the mCAM Security

Monitoring Software

CD into the computer’s

CD ROM drive.

BACK OF THE MONITOR

BACK OF A COMPUTER (NOT INCLUDED)

ROUTER (NOT INCLUDED)

BACK OF A COMPUTER (NOT INCLUDED)

30:00

STEP 2 SHOULD TAKE

APPROXIMATELY 15 - 30

MINUTES TO COMPLETE

It’s all on the web













Product Information

User Manuals

Quick Start Guides

Speciﬁcation Sheets

Software Updates

Firmware Upgrades

FOR ADDITIONAL INFORMATION OR TROUBLESHOOTING HELP, REFER

TO YOUR OWNERS MANUAL FOR ASSISTANCE. YOU CAN ALSO CALL OR

EMAIL FOR FURTHER SUPPORT.

TOLL FREE TECHNICAL SUPPORT: 1-888-42 LOREX (1-888-425-6739)

EMAIL SUPPORT: [email protected]

WEBSITE: WWW.LOREXCCTV.COM

Port Forward your Router FIRST before proceeding with the mCam Broadcasting

Feature (for Remote Viewing). You must Port Forward Port 9868.

All routers are different. To Port Forward your Router

Refer to your Router’s manual for speciﬁc instructions on port forwarding (or) Check

the Router conﬁguration guide support document in the consumer guide section on our

website:

http://lorexstore.lorextechnology.com/article.aspx?aid=106

Select your Router from the list of available tutorials.

www.lorexcctv.com

Other manuals for SG21CD7444UQ-A80

Other Lorex Security System manuals

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual