Lightmybricks 10271 User manual

The following page is the instructions for the

Light My Bricks Fiat 500 (10271)

LED light kit.

If you run into any issues, please refer to the

online troubleshooting guide.

To ensure a trouble

-

free installation of your light kit, please read and follow

each step carefully.

Please note: This page lists instructions for the LED light kit only

Package Contents:

5

x

White 15cm Bit Lights

4

x

White 15cm Micro Bit Lights

x

1

8

-

Port Expansion Board

1

x

Micro 2

-

4 Port Expansion Board

1

x

NC Push Board

2

x

15cm Connecting Cables

4

x

Ahdesive Squares

1

x

Flat Battery Pack

(requires 2x CR2032 Batteries)

Important

things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging

the cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as

you insert into the port. If a plug won’t fit easily into a port connector, do not

force it.

Incorrectly inserting the connector can can result in bent pins inside the

port or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up,

ensure the side of the connector with the wires exposed is facing down. If a

plug won’t fit easily into a port connector, don’t force it. Doing so will damage

the plug and the connector.

Connecting Micro Cable connectors to Micro

Expansion Board Ports

Take extra care when inserting the micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is

similar to connecting lights and cables to Strip Lights. With the expansion

board facing up, ensure the side of the connector with the wires exposed is

facing down. If a plug won’t fit easily into a port connector, do not force it. Use

your fingernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) Start by lifting up the hood and disconnecting the following

sectionssurrounding the front of the vehicle:

2.) Take the bottom left headlight section and disconnect the trans clear

roundplate. Take a White 15cm Bit Light and thread the connector end of

the cable through the right hole and out the bottom of the yellow brick.

Thread the cable all the way through, then carefully bend the Bit Light so

that it sits flat against the front hole. Secure the light in place by

reconnecting the trans clear round plate over the top.

Reconnect this section back to the front left side of the car ensuring the cable

is slipped inside and behind as shown below.

Table of contents

Other Lightmybricks Toy manuals

Lightmybricks

Lightmybricks LEGO Star Wars Death Star 75159 Lighting Kit User manual

Lightmybricks

Lightmybricks LEGO Jurassic Park T.Rex Rampage 75936 Lighting... User manual

Lightmybricks

Lightmybricks LEGO CAMP NOU FC BARCELONA 10284 User manual

Lightmybricks

Lightmybricks 70657 User manual

Lightmybricks

Lightmybricks LEGO LIGHTYEAR XL-15 SPACESHIP User manual

Lightmybricks

Lightmybricks LEGO WINTER HOLIDAY TRAIN User manual

Lightmybricks

Lightmybricks LEGO BIRDS OF PARADISE 10289 User manual

Lightmybricks

Lightmybricks LEGO Super Star Destroyer 10221 Lighting Kit User manual

Lightmybricks

Lightmybricks LEGO Mercedes Benz Arocs 42043 Lighting Kit User manual

Lightmybricks

Lightmybricks LEGO DARTH VADER User manual

Lightmybricks

Lightmybricks 10290 User manual

Lightmybricks

Lightmybricks Detective's O ce 10246 User manual

Lightmybricks

Lightmybricks LEGO GALAXY EXPLORER 10497 LIGHT KIT User manual

Lightmybricks

Lightmybricks LEGO Winter Village Bakery 10216 Lighting... User manual

Lightmybricks

Lightmybricks LEGO Star Wars Yoda 75255 Lighting Kit User manual

Lightmybricks

Lightmybricks LEGO SANTA'S VISIT 10293 User manual

Lightmybricks

Lightmybricks 76178 User manual

Lightmybricks

Lightmybricks Light & Sound Kit for LEGO Ghostbusters Ecto-1... User manual

Lightmybricks

Lightmybricks LEGO HOGSMEADE VILLAGE VISIT 76388 LIGHT KIT User manual

Lightmybricks

Lightmybricks LEGO 40426 User manual

Lightmybricks

Lightmybricks LEGO COLOSSEUM 10276 LIGHT KIT User manual

Lightmybricks

Lightmybricks 40410 User manual

Lightmybricks

Lightmybricks LEGO 1989 Batwing 76161 User manual

Lightmybricks

Lightmybricks LEGO 75304 User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions