Kramer Yarden 6-C User manual

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

Yarden 6-C

Closed-back Ceiling Speakers

P/N: 2900-300347 Rev 2

Yarden 6-C – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

3Overview 3

4Your Yarden 6-C Closed-back Ceiling Speakers 4

5Installing the Yarden 6-C Closed-back Ceiling Speakers 6

5.1 Choosing the Best Location 6

5.2 Cutting the Ceiling Tile 6

5.3 Mounting the Speakers 7

5.4 Setting up an Array Installation 10

5.5 Painting the Speaker 13

6Technical Specifications 14

Figures

Figure 1: Yarden 6-C in a Boardroom Setup 3

Figure 2: Yarden 6-C Closed-back Ceiling Speaker 4

Figure 3: Yarden 6-C Schematic Diagram 5

Figure 4: Mounting the Yarden 6-C 8

Figure 5: Plugging and Securing the Cable 9

Figure 6: Tighten the Mounting Tabs 9

Figure 7: Adjust Tap Selector 10

Figure 8: Square Layout 11

Figure 9: Hexagonal Layout 11

Figure 10: Square Layout Parallel Wiring 12

Yarden 6-C - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer Yarden 6-C Closed-back Ceiling

Speakers, which are ideal for the following typical applications:

Hotel lobbies and conference rooms

Boardrooms and meeting rooms

Classrooms and lecture venues

Yarden 6-C speakers are designed for indoor dry locations and are

suitable for use in air handling spaces (plenum spaces).

Yarden 6-C - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerav.com/downloads/Yarden 6-C to check for up-to-

date user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer Speakers away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

Do not open the housing of the speaker; doing so may reduce the

quality of the sound.

UL2043 –Fire Test for Heat and Visible Smoke Release for

Discrete Products and their Accessories Installed in Air-Handling

Spaces.

Yarden 6-C - Overview

3 Overview

The Yarden 6-C consists of a pair of high performance closed back speakers.

Mount your Yarden 6-C speakers to the ceiling in one of two ways: either directly

onto the ceiling or, for added protection, secure the speakers safely, using our

ceiling mounting kit that is provided free (see Section 5.3).

The Yarden 6-C speakers feature a multi-tap power transformer for selecting8Ω

(bypassing the transformer) or 70V/100V power settings that are suitable for an

array installation. Figure 1shows an example of how the Yarden 6-C can be

installed in a boardroom setup:

Figure 1: Yarden 6-C in a Boardroom Setup

Yarden 6-C - Your Yarden 6-C Closed-back Ceiling Speakers

4 Your Yarden 6-C Closed-back Ceiling

Speakers

Figure 2 defines the Yarden 6-C:

Figure 2: Yarden 6-C Closed-back Ceiling Speaker

The following table defines the Yarden 6-C hardware items (per speaker pair) for

each model in the series:

Description

A pair of

ceiling

speakers

(one shown)

Two grilles

(one shown)

Cutout

template

This table defines the ceiling mounting kit items:

Four

support

ring

screws

Two ceiling

support rings

(C-ring) –one

shown

Two pairs of

tile rails –

one of a pair

shown

Yarden 6-C - Your Yarden 6-C Closed-back Ceiling Speakers

Each Closed-back Ceiling speaker is supported by a C-ring and two tile rails. The tile

rails prevent the speakers from falling if the tile itself comes out or falls apart, as

their ends catch onto the T-grid. When mounting onto the ceiling tiles,use both

supports. When mounting onto a sheetrock ceiling, the C-ring alone is used to

reinforce the ceiling material.

Be sure that the tiles can support the speaker. Smaller sized tiles or

fiberglass-type tiles cannot support the weight of the speakers.

When this is the case, the speakers will need additional support.

Figure 3 shows a schematic diagram of the Yarden 6-C:

Figure 3: Yarden 6-C Schematic Diagram

Yarden 6-C - Installing the Yarden 6-C Closed-back Ceiling Speakers

5 Installing the Yarden 6-C Closed-back

Ceiling Speakers

This section explains how to install the Yarden 6-C, that is:

Choosing the best place to locate your speakers (see Section 5.1)

Cutting the ceiling tile (see Section 5.2)

Mounting the speakers (see Section 5.3)

Setting up an array installation (see Section 5.4)

Painting the speakers (see Section 5.5)

5.1 Choosing the Best Location

Ideally, locate the speakers above the main listening area. Before doing so, be

sure that:

The desired location is free of obstructions, such as electrical piping, AC

ducts or water lines, and so on

There is enough space behind the mounting surface for the speakers

The rear side of the speaker is not blocked by wall studs or other objects

5.2 Cutting the Ceiling Tile

To cut the ceiling tile, do the following:

1. Remove the circle in the supplied template.

Keep this template for later use as a mask, as you may want to paint the speakers (see

Section 5.5)

2. Mark the opening in the correct location by tracing the hole in the template.

3. Cut out the hole according to the template or with a circular cutter set to the

appropriate cutout size.

Initially, you can cut a smaller area inside the marked hole just to be sure that the

space above the speakers is clear

Yarden 6-C - Installing the Yarden 6-C Closed-back Ceiling Speakers

4. Routethewiringfromtheamplifiertothespeakers’cutoutholes,takingcare

not to place them next to electrical wires or at least at a distance of about

two feet from an AC line.

Do not nail or staple the speaker wires.

If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles where

you plan to install the speakers. Use the template to trace and then cutout the

speaker hole over an empty box.

The closed-back ceiling speakers are supported by the ceiling mounting kit (two

C-rings and two pairs of tile rails; the tile rails prevent the speakers from falling if

the tile itself comes out or falls apart, as their ends catch onto the T-grid). When

mounting onto the ceiling tiles, use both supports.

Be sure that the tiles can support the speaker. Smaller sized tiles or

fiberglass-type tiles cannot support the weight of the speakers.

When this is the case, the speakers will need additional support.

When mounting onto a sheetrock ceiling, the C-ring alone is used to reinforce the

ceiling material.

5.3 Mounting the Speakers

To mount the Yarden 6-C, do the following:

1. Place the C-ringovertheholecutintheceilingtile(onthe“ceiling”side).

Place it around the hole so that the tabs are located in parallel to the tile

edges.

This manual suits for next models

Table of contents

Other Kramer Speakers manuals

Kramer

Kramer Galil 6-CO SPK-C613 User manual

Kramer

Kramer YARDEN 6-OD User manual

Kramer

Kramer SPK-W511 User manual

Kramer

Kramer SPK-W511 User manual

Kramer

Kramer SPK-C613 User manual

Kramer

Kramer Dolev 8 User manual

Kramer

Kramer SPK-WA511 User manual

Kramer

Kramer SPK-C612 Installation and operation manual

Kramer

Kramer SPK-C612 User manual

Kramer

Kramer SPK-C611 User manual

Kramer

Kramer Yarden 4-C SPK-C421-K User manual

Kramer

Kramer SPK-CCF848 User manual

Kramer

Kramer Galil 6-O SPK-W611T User manual

Kramer

Kramer Galil 4-C User manual

Kramer

Kramer SPK-W613 User manual

Kramer

Kramer SPK-W411T User manual

Kramer

Kramer Tavor 5-O User manual

Kramer

Kramer SPK-CC348F User manual

Kramer

Kramer SPK-C812 User manual

Kramer

Kramer Galil 4-D User manual

Kramer

Kramer Galil 6-AW User manual

Kramer

Kramer SPK-W612 User manual

Kramer

Kramer SWM-1 User manual

Kramer

Kramer SPK-OCA504 User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide