Kramer KADS-100 User manual
KADS-100/KADS-1/KADS-2 – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Using the IR Transmitter 5
4Defining the KADS-100, KADS-1 and KADS-2 6
4.1 Defining the KADS-100 Speaker 6
4.2 Defining the KADS-1 or a KADS-2 9
4.3 Defining the KADS-1 or a KADS-2 10
5Installing in a Rack 11
6Connecting the KADS-100, KADS-1 and KADS-2 12
6.1 Installing the Ferrite Rings 14
6.2 Connecting a Serial Controller 15
6.3 Wiring the RJ-45 Connectors 15
7Setting the Speaker ID 16
8Operating the KADS-100 17
8.1 Operating the KADS-100 Using the Front Panel Buttons 17
8.2 Operating the KADS-100 Using the Menu 21
8.3 Operating the KADS-100 Using the Web Pages 22
8.4 Operating the KADS-1 and KADS-2 Using the Remote Control 35
9Updating the KADS-1 or KADS-2 Firmware 36
10 Technical Specifications 37
10.1 Default IP Parameters 39
10.2 Default Logon Credentials 39
11 Protocol 3000 40
11.1 Kramer Protocol 3000 Syntax 40
11.2 Kramer Protocol 3000 Commands 43
Figures
Figure 1: KADS-100 Front Panel 7
Figure 2: KADS-100 Rear Panel 8
Figure 3: KADS-1 Rear Panel 9
Figure 4: KADS-2 Rear Panel 10
Figure 5: Connecting the KADS-100, KADS-1 and KADS-2 12
Figure 6: Looping the Cable through the Ferrite Ring 14
Figure 7: TP PINOUT 15
Figure 8: Setting the Rotary Switches 16
Figure 9: Entering Logon Credentials 23
Figure 10: The Default Page 23
Figure 11: The Switching Page 24
Figure 12: Channel Selection Example 26
Figure 13: Analog Input Selection Button 26
Figure 14: USB Input Selection Button 27
ii
KADS-100/KADS-1/KADS-2 - Contents
Figure 15: Playlist Window 28
Figure 16: SPDIF Input Selection Button 29
Figure 17: Test Tone Selection Button 29
Figure 18: The Channel Settings Page 30
Figure 19: The Video and Audio Settings Page 31
Figure 20: The Microphone Settings Page 33
Figure 21: The Authentication Page—Security Disabled 34
Figure 22: The Authentication Page—Security Enabled 34
Figure 23: The About Us Page 35
KADS-100/KADS-1/KADS-2 – Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer KADS-100 Master Audio Controller,
KADS-1 Speaker and KADS-2 Speaker which are part of the Kramer Audio
Distribution System and are ideal for:
Small to large presentation and multimedia applications
Long-range audio distribution for schools, hospitals, stores, and security
applications
2
KADS-100/KADS-1/KADS-2 - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerav.com/downloads/KADS-100 to check for up-to-
date user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your KADS-100, KADS-1, and KADS-2 away from moisture,
excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the
wall before installing
This manual suits for next models
2
Table of contents
Other Kramer Speakers manuals
Kramer
Kramer Galil 6-AW User manual
Kramer
Kramer Galil 6-CO SPK-C613 User manual
Kramer
Kramer Yarden 4-C SPK-C421-K User manual
Kramer
Kramer SPK-CC678 User manual
Kramer
Kramer Dolev 8 User manual
Kramer
Kramer Yarden 6-O User manual
Kramer
Kramer SPK-OCA508 User manual
Kramer
Kramer SPK-CCF848 User manual
Kramer
Kramer SPK-CC688 User manual
Kramer
Kramer Galil 8-C User manual
Kramer
Kramer Yarden 6-C User manual
Kramer
Kramer SPK-OC508 User manual
Kramer
Kramer Yarden 8-C SPK-C821-K User manual
Kramer
Kramer SPK-C612 User manual
Kramer
Kramer Tavor 5-O User manual
Kramer
Kramer Yarden 4-O User manual
Kramer
Kramer SPK-CO608 User manual
Kramer
Kramer SPK-WA511 User manual
Kramer
Kramer YARDEN 6-OD User manual
Kramer
Kramer Tavor 6-O User manual
