Kichler Lighting True User manual

Product images may vary slightly from actual product.

52" True

INSTRUCTION MANUAL

Model# 310452READ AND SAVE THESE INSTRUCTIONS

2 | KICHLER.COM

TABLE OF CONTENTS

INSTALLING THE FAN BLADES..............................................14

INSTALLING THE DECORATIVE COVER...............................14

INSTALLING THE COOLTOUCH™ WALL PLATE.................15

INSTALLING THE TRANSMITTER..........................................15

OPERATING INSTRUCTIONS..................................................16

TROUBLESHOOTING................................................................19

FCC INFORMATION ...................................................................21

SAFETY RULES............................................................................ 3

TOOLS AND MATERIALS REQUIRED..................................... 5

PACKAGE CONTENTS................................................................ 5

MOUNTING OPTIONS................................................................ 6

HANGING THE FAN .....................................................................7

INSTALLATION OF SAFETY CABLE...................................... 10

ELECTRICAL CONNECTIONS................................................ 10

FINISHING THE MOTOR INSTALLATION .............................13

52" True | 3

fan support and may need to be replaced. Due to the

complexity of the installation of this fan, a qualified

licensed electrician is strongly recommended.

6. The outlet box and support structure must be

securely mounted and capable of reliably supporting

a minimum of 15.9 kg (35 pounds). Use only cULus

Listed outlet boxes marked “Acceptable for Fan

Support of 15.9 kg (35 lbs) or less”.

7. The fan must be mounted with a minimum of 2.1 m

(7 feet) clearance from the trailing edge of the blades

to the floor.

8. To operate the reverse function on this fan, press

the “Reverse” Button on the transmitter while fan is

running.

9. Avoid placing objects in the path of the blades.

10. WARNING: make sure the power is disconnected

before cleaning your fan.

READ AND SAVE THESE INSTRUCTIONS

SAFETY RULES

WARNING: FOR CANADA, THIS FAN MUST BE SECURED DIRECTLY TO THE BUILDING STRUCTURE / CEILING JOIST.

DON’T SECURE THIS FAN TO AN OUTLET BOX.

1. CAUTION – RISK OF SHOCK: Disconnect Power at

the main circuit breaker panel or main fusebox before

starting and during the installation.

2. WARNING: All wiring must be in accordance with the

National Electrical Code “ANSI/NFPA 70” and local

electrical codes. Electrical installation should be

performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of electric shock, this

fan must be installed with a general-use, isolating wall

control/switch.

4. WARNING: Not suitable for use with solid-state speed

controls.

5. WARNING: To reduce the risk of fire, electric shock,

or personal injury, mount to outlet box marked

“acceptable for fan support of 15.9 kg (35 lbs.) or

less” and use mounting screws provided with the

outlet box. Most outlet boxes commonly used for

the support of light fixtures are not acceptable for

4 | KICHLER.COM

16. N.W. 7.82 KGS (17.24 LBS) / G.W. 8.75 KGS (19.29 LBS)11. To avoid personal injury or damage to the fan and

other items, be cautious when working around or

cleaning the fan.

12. Do not use water or detergents when cleaning the fan

or fan blades. A dry dust cloth or lightly dampened

cloth will be suitable for most cleaning.

13. After making electrical connections, spliced

conductors should be turned upward and pushed

carefully up into outlet box. The wires should be

spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the

outlet box and the ungrounded conductor on the

other side of the outlet box.

14. Electrical diagrams are reference only. Light kits that

are not packed with the fan must be cULus Listed

and marked suitable for use with the model fan you

are installing. Switches must be cULus General Use

Switches. Refer to the Instructions packaged with the

light kits and switches for proper assembly.

15. All set screws must be checked, and retightened

where necessary, before installation.

SAFETY RULES (continued)

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY,

DO NOT BEND THE BLADE BRACKETS DURING

ASSEMBLY OR AFTER INSTALLATION. DO NOT

INSERT OBJECTS IN THE PATH OF THE BLADES.

52" True | 5

TOOLS AND MATERIALS REQUIRED

PACKAGE CONTENTS

• Phillips Screwdriver

• Blade Screwdriver

• 11 mm Wrench

• Step Ladder

• Wire Cutters

Unpack your fan and check the contents . You should have the following items:

A. Fan Blades (3)

B. Canopy & Ceiling

Mounting Bracket

C. Ball/Downrod Assembly

D. Coupling Cover

E. Fan Motor Assembly

F. Decorative Cover

G. Receiver

H. Transmitter (371075) and Wall Plate

I. Part Bag Contents

1) Mounting Hardware:

Flat Washers (2), Wood Screws (2)

Star Washers (2), Wire Nuts (3)

Screws (2)

2) Blade Attachment Hardware:

Blade Screws (11), Fiber Washers (11)

3) Safety Cable Hardware:

Wood Screw (1), Flat Washer (1)

4) Balance Kit

6 | KICHLER.COM

Fig. 1

Outlet box

Fig. 2

Fig. 3

Recessed

outlet box ceiling Ceiling

Mounting

plane

Provide strong

support

ANGLED CEILING

MAXIMUM 18° ANGLE

Fig. 4

Outlet box

MOUNTING OPTIONS

If there is not an existing UL (cUL for Canadian Installation) listed

mounting box, then read the following instructions. Disconnect

the power by removing fuses or turning o circuit breakers.

Secure the outlet box directly to the building structure. Use

appropriate fasteners and building materials. The outlet box and

its support must be able to fully support the full weight of the fan

(up to 15.9kg (35 pounds)). Do not use plastic outlet boxes.

Figures 1, 2 and 3 are examples of dierent ways to mount the

outlet box.

NOTE: If you are installing the ceiling fan on a sloped (vaulted)

ceiling, you may need a longer downrod to maintain proper

clearance between the tip of the blade and the ceiling. A

minimum clearance of 12" is suggested for optimal operation.

NOTE: Depending on the location you have selected for

installation, you may need to purchase and install a “Joist

Hanger” for the support of the outlet box. Make sure the joist

hanger you purchase has been designed for use with ceiling

fans. (Fig. 4)

52" True | 7

Ceiling Mounting Bracket

HANGING THE FAN

CAUTION: To avoid possible electrical shock, be sure you have

turned o the power at the main circuit panel.

REMEMBER to turn o the power before you begin installation.

This is necessary for your safety.

WARNING: All set screws must be checked, and retightened where

necessary, before installation.

To properly install your ceiling fan, follow the steps below.

Step 1. Remove the canopy trim ring from the canopy by turning the canopy

trim ring counter clockwise. (Fig. 5)

Step 2. Remove the ceiling mounting bracket from the canopy by removing

and saving one of the two screws. Loosen the remaining screw by a half turn.

(Fig. 5)

Step 3. Pass the 120 volt supply wires from the ceiling outlet box through the

center of the ceiling mounting bracket. (Fig. 6)

Step 4. Attach the ceiling mounting bracket to the outlet box using the

screws and washers included with the outlet box. (Fig. 6)

Fig. 6

Fig. 5

Canopy

Washer

(Supplied with Electrical Box)

Canopy Trim Ring

Mounting Screw

(Supplied with

Electrical Box)

120V Wires

Washer

(Supplied with Electrical Box)

Mounting Screw

(Supplied with

Electrical Box)

Ceiling Mounting

Bracket

cULus

Electrical

Box

8 | KICHLER.COM

WARNING: All set screws must be checked, and retightened where

necessary, before installation.

Step 5. Remove the retaining clip and the hitch pin from the ball/downrod

assembly. Remove the ball from the ball/downrod assembly by loosening the set

screw (do not remove) on the ball, unscrewing and removing the cross pin, and

unscrewing the ball from the downrod. (Fig. 7)

Step 6. Loosen the two set screws (do not remove) in the coupling on top of the

motor. (Fig. 8)

Step 7. Carefully feed the wires from the coupling on top of the motor assembly

up through the downrod. (Fig. 8)

Step 8. Thread the downrod into the coupling on top of the motor assembly until

the hitch pin holes in the downrod and the hitch pin holes in the coupling are

aligned. Carefully insert the hitch pin through the holes in the coupling and the

downrod. (Fig. 8)

NOTE: Be careful not to jam the hitch pin against the wiring inside of the

downrod.

Insert the retaining clip through the hole near the end of the hitch pin until it snaps

into its locked position. (Fig. 8)

Step 9. Tighten the two set screws in the coupling on top of the motor assembly

firmly. (Fig. 8)

Step 10. Carefully slip the coupling cover, canopy trim ring (smooth finished side

facing motor body), and canopy onto the downrod. (Fig. 8)

Carefully thread the ball onto the downrod. Insert the cross pin through the ball

and downrod and tighten. (Fig. 9)

NOTE: Be careful not to jam the cross pin against the wiring inside of the

downrod.

Tighten the set screw on the ball. Make sure that the wires are not twisted. (Fig. 9)

HANGING THE FAN (continued)

Fig. 7

Cross Pin

Hitch Pin

Ball

Canopy

Set Screw

Downrod

Coupling

Set Screw

Coupling Cover

Hitch Pin

Retaining Clip

Retaining

Clip

Canopy Trim Ring

Motor

Assembly

Fig. 9

Fig. 8

Downrod

Set Screw

Cross

Set Screw

Ball

Downrod

52" True | 9

Step 11. Lift the motor assembly into position and place the hanger ball into the

ceiling mounting bracket. Rotate the entire assembly until the “Check Tab” has

dropped into the “Registration Slot” and seats firmly. (Fig. 10)

The entire motor assembly should not rotate (left or right) when seated properly.

WARNING: Failure to reattach the cross pin and seat the “Check

Tab” can cause the fan to fall from the ceiling during operation. Take

special care to make sure this pin is reattached.

HANGING THE FAN (continued)

Registration Slot

Check Tab

Ceiling Mounting

Bracket

Fig. 10

10 | KICHLER.COM

INSTALLATION OF SAFETY Cable

(required for Canadian installation ONLY)

A safety support cable is provided to help prevent the ceiling fan from falling, please

install it as follows.

Step 1. Attach the wood screw and washer to the ceiling joist next to the ceiling

mounting bracket but do not tighten. (Fig. 11)

Step 2. Adjust the length of the safety cable to reach the screw and washer by pulling

the extra cable through the cable clamp until the overall length is correct, put the end of

the cable back through the cable clamp, forming a loop at the end of the cable. Tighten

the cable clamp securely. Now, put the loop in the end of the safety cable over the wood

screw and under the washer. Tighten the wood screw securely.

NOTE: Although the safety support cable is required for Canadian installations only, it’s a

good idea to make the attachment with any installation.

ELECTRICAL CONNECTIONS

CAUTION: To avoid possible electrical shock, be sure you have turned o the

power at the main circuit panel.

Step 1. Insert the receiver into the ceiling mounting bracket with the flat side of the

receiver facing the ceiling. (Fig. 12) For best performance, make sure the black antenna

wire (on the end of the receiver) remains extended, and does not become tangled with

the electrical wires. Fig. 12

Ceiling Mounting

Bracket

Fig. 11

Ceiling Mounting

Bracket

Receiver

Attach safety cable

to ceiling joist with

wood screw and washer

This manual suits for next models

Table of contents

Languages:

Other Kichler Lighting Fan manuals

Kichler Lighting

Kichler Lighting Lehr Decor 80" User manual

Kichler Lighting

Kichler Lighting 52 inch Colerne LED User manual

Kichler Lighting

Kichler Lighting Starkk 330174OZ User manual

Kichler Lighting

Kichler Lighting 54 inch Skye User manual

Kichler Lighting

Kichler Lighting Cadence User manual

Kichler Lighting

Kichler Lighting VASSAR User manual

Kichler Lighting

Kichler Lighting Selectlight fixture User manual

Kichler Lighting

Kichler Lighting Monarch II User manual

Kichler Lighting

Kichler Lighting Seaside User manual

Kichler Lighting

Kichler Lighting IMARI 300365SBK User manual

Kichler Lighting

Kichler Lighting Lucia User manual

Kichler Lighting

Kichler Lighting Verdi User manual

Kichler Lighting

Kichler Lighting Arkwet Weather+ User manual

Kichler Lighting

Kichler Lighting Hatteras Bay Patio User manual

Kichler Lighting

Kichler Lighting Arkwright User manual

Kichler Lighting

Kichler Lighting 35162 User manual

Kichler Lighting

Kichler Lighting 300370 User manual

Kichler Lighting

Kichler Lighting Vassar 330002OZ User manual

Kichler Lighting

Kichler Lighting Basics 404 User manual

Kichler Lighting

Kichler Lighting Sterling Manor Patio User manual

Kichler Lighting

Kichler Lighting Select Canfield 300107 User manual

Kichler Lighting

Kichler Lighting Imari 65 User manual

Kichler Lighting

Kichler Lighting Lija User manual

Kichler Lighting

Kichler Lighting 52" RENEW ENERGY STAR User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual