Kichler Lighting Lija User manual
INSTRUCTION MANUAL
Product images may vary slightly from actual product.
52" Lija™
KICHLER.COM
TABLE OF CONTENTS
SAFETY RULES .................................................................4
TOOLS REQUIRED............................................................5
PACKAGE CONTENTS ....................................................5
MOUNTING OPTIONS.....................................................6
HANGING THE FAN......................................................7-9
INSTALLATION OF SAFETY SUPPORT..................10
ELECTRICAL CONNECTIONS ............................. 11-12
FINISHING THE INSTALLATION................................ 13
ATTACHING THE FAN BLADES.................................14
INSTALLING THE MOUNTING PLATE....................14
INSTALLING THE LIGHT FIXTURE........................... 15
OPERATING INSTRUCTIONS...............................16-17
INSTALLING THE REMOTE
CONTROL HOLDER.......................................................18
TROUBLESHOOTING.............................................19-20
FCC INFORMATION .......................................................21
3
52" Lija™|
SAFETY RULES
1. To reduce the risk of electric shock, ensure electricity has been
turned o at the circuit breaker or fuse box before beginning.
2. All wiring must be in accordance with the National Electrical
Code and local electrical codes. Electrical installation should
be performed by a qualified licensed electrician.
3. WARNING: To reduce the risk of fire, electric shock, or
personal injury, use mounting screws provided with the
outlet box. Most outlet boxes commonly used for the
support of light fixtures are not acceptable for fan support
and may need to be replaced. Due to the complexity of
the installation of this fan, a qualified licensed electrician is
strongly recommended.
4. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of
50 pounds. Use only CUL Listed outlet boxes marked “FOR
FAN SUPPORT”.
5. The fan must be mounted with a minimum of 7 feet
clearance from the trailing edge of the blades to the floor.
6. Do not operate reversing switch while fan blades are in motion.
Fan must be turned o and blades stopped before reversing blade
direction.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other items, be
cautious when working around or cleaning the fan.
9. Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be suitable
for most cleaning.
10. After making the electrical connections, spliced conductors should
be turned upward and pushed carefully up into outlet box. The
wires should be spread apart with the ground wire and white
(common) wire to one side with the black (load) wire to the other
side of the outlet box.
11. Electrical diagrams are reference only. Light kits that are not
packed with the fan must be CUL Listed and marked suitable for
use with the model fan you are installing. Switches must be CUL
General Use Switches. Refer to the Instructions packaged with the
light kits and switches for proper assembly.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND
THE BLADE BRACKETS (ALSO REFERRED TO AS FLANGES)
DURING ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT
OBJECTS IN THE PATH OF THE BLADES.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY, MOUNT FAN TO OUTLET BOX
MARKED “ACCEPTABLE FOR FAN SUPPORT”.
4 | KICHLER.COM
TOOLS AND MATERIALS REQUIRED
PACKAGE CONTENTS
•Phillips screwdriver
•Blade screwdriver
•11 mm wrench
•Step ladder
•Wire cutters
Unpack your fan and check the contents . You should have the following items:
A. Fan blades (4)
B. Canopy and ceiling mounting bracket
C. Ball/downrod assembly
D. Coupling cover
E. Fan motor assembly
F. Set of 4 blade brackets and
pre-installed mounting screws
G. Mounting plate
H. LED light fixture
I. Glass shade
J. Receiver
K. Transmitter and holder
with mounting screws
L. Part bag contents
1) Mounting hardware: wire nuts (3)
2) Blade attachment hardware:
screws (12), fiber washers (12)
3) Safety cable hardware:
wood screw, spring washer,
flat washer
A
B
C
D
E
F
G
H
I
J
K
L
5
52" Lija™|
MOUNTING OPTIONS
If there isn’t an existing UL (cUL for Canadian Installation) listed
mounting box, then read the following instructions. Disconnect the
power by removing fuses or turning o circuit breakers.
Secure the outlet box directly to the building structure. Use
appropriate fasteners and building materials. The outlet box and its
support must be able to fully support the moving weight of the fan
(at least 50 lbs). Do not use plastic outlet boxes.
Figures 1, 2 and 3 are examples of dierent ways to mount the
outlet box.
NOTE: If you are installing the ceiling fan on a sloped (vaulted)
ceiling, you may need a longer downrod to maintain proper
clearance between the tip of the blade and the ceiling. A minimum
clearance of 12" is suggested for optimal operation.
NOTE: Depending on the location you have selected for
installation, you may need to purchase and install a “Joist Hanger”
for the support of the outlet box. Make sure the joist hanger you
purchase has been designed for use with ceiling fans. (Fig. 4)
Outlet box
Fig. 1
Outlet box
Fig. 2
Fig. 3
Recessed
outlet box
Provide strong
support
Ceiling
mounting
plane
ANGLED CEILING
MAXIMUM 20° ANGLE
Fig. 4
Outlet box
6 | KICHLER.COM
HANGING THE FAN
REMEMBER to turn o the power before you begin. To properly install your ceiling
fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the canopy by turning
the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by removing
(and save one of the two screws. Loosen the remaining screw by a half turn.
(Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box through the
center of the ceiling mounting bracket. (Fig.6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the screws and
washers included with the outlet box. (Fig. 6)
Step 5. Remove the hanger ball from the downrod assembly by loosening the set
screw, unscrewing and removing the cross pin and unscrewing the ball o the rod.
(Fig.7)
Hanger bracket
Ceiling canopy
Canopy cover
Fig. 6
120V Wires
CUL Listed
outlet box
Washers
Mounting screws
(supplied with electrical box)
Ceiling
mounting
bracket
Fig. 7
Downrod
Set screw
Hanger
ball
Cross pin
Fig. 5
7
52" Lija™|
Fig. 8
HANGING THE FAN
Step 6. Loosen the two set screws and remove the hitch pin and retaining clip from
the coupling on top of the motor assembly. (Fig. 8)
Step 7. Carefully feed the electrical lead wires safety cable from the fan up through
the downrod. Thread the downrod into the coupling until the Hitch pin holes are
aligned.
Next, replace the hitch pin and retaining clip. Tighten both set screws. (Fig. 8)
Supply wires
Set screw
Retaining clip
Downrod
Set screw
Safety cable
Hitch pin
8 | KICHLER.COM
HANGING THE FAN
Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod.
(Fig. 9)
Thread the hanger ball onto the downrod, insert the cross pin through the
downrod and tighten. Tighten the set screw.
Step 9. Lift the motor assembly into position and place the hanger ball into the
ceiling mounting bracket.
Rotate the entire assembly until the “Check Tab” has dropped into the
“Registration Slot” and seats firmly. (Fig. 10)
The entire motor assembly should not rotate (left or right) when seated properly.
WARNING: Failure to reattach the cross pin and seat the “Check Tab” can cause
the fan to fall from the ceiling during operation. Take special care to make sure this
pin is reattached.
Registration slot
Fig. 10
Fig. 9
Coupling cover
Retaining clip
Set screws
Hitch pin
Canopy cover
Canopy
Downrod
9
52" Lija™|
INSTALLATION OF SAFETY SUPPORT
(Required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from falling.
Step 1. Attach the provided wood screw and washers to the ceiling joist next to the
mounting bracket but do not tighten. (Fig. 11)
Step 2. Adjust the length of the safety cable to reach the screw and washers by pulling
the extra cable through the cable clamp until the overall length is correct, put the end of
the cable back through the cable clamp, forming a loop at the end of the cable. Tighten
the cable clamp securely. Now, put the loop in the end of the safety cable over the wood
screw and under the washer. Tighten the wood screw securely.
NOTE: Although the safety support cable is required for Canadian installations only.
It’s a good idea to make the attachment with any installation.
Ceiling
mounting
bracket Attach safety cable
to ceiling joist with
screw and washer
Fig. 11
10 | KICHLER.COM
This manual suits for next models
1
Table of contents
Languages:
Other Kichler Lighting Fan manuals
Kichler Lighting
Kichler Lighting Cameron User manual
Kichler Lighting
Kichler Lighting Bead User manual
Kichler Lighting
Kichler Lighting Select Dorset User manual
Kichler Lighting
Kichler Lighting Vinea 52 User manual
Kichler Lighting
Kichler Lighting Monarch II Select User manual
Kichler Lighting
Kichler Lighting PINION 60 User manual
Kichler Lighting
Kichler Lighting Renew Select Patio User manual
Kichler Lighting
Kichler Lighting Almere User manual
Kichler Lighting
Kichler Lighting ELLYS User manual
Kichler Lighting
Kichler Lighting Guardian 330057 User manual
Kichler Lighting
Kichler Lighting Canfield User manual
Kichler Lighting
Kichler Lighting 52" RENEW DESIGNER User manual
Kichler Lighting
Kichler Lighting Sterling Manor User manual
Kichler Lighting
Kichler Lighting KOSMUS User manual
Kichler Lighting
Kichler Lighting 65" GENTRY User manual
Kichler Lighting
Kichler Lighting 54 Meredith User manual
Kichler Lighting
Kichler Lighting 300260/60-GENT Series User manual
Kichler Lighting
Kichler Lighting Eris User manual
Kichler Lighting
Kichler Lighting FLYY 310700MWH User manual
Kichler Lighting
Kichler Lighting Motu User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
