Keysight M9601A Operator's manual

Keysight M9601A PXIe

Precision Source/Measure Unit

Quick Startup Poster

Installation Procedure

This document provides the brief installation procedure. Go to www.keysight.com/find/m9601a and get Keysight

M9601A Startup Guide and Keysight M9601A software installer. Refer to the Startup Guide for more information.

1. Unpack the module and inspect it for any shipping damage.

2. Verify the shipment contents. The following items must be included in this shipment.

- M9601A PXIe Precision Source/Measure Unit module, 1 ea.

- Connector-Terminal Block, 1 ea.

- Short Bar, 1 ea.

- Certificate of Calibration (without test data), 1 ea.

- Quick Startup Poster (this document), 1 ea.

3. Install the software.

Requirements: The followings are required for installing the software.

- Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded computer) installed with Keysight IO

Libraries Suite

- Keysight PXIe chassis which has already been set up

Copy the M9601A software installer into the controller, launch it, and follow the instruction prompts to install

the software.

Declaration of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go

to www.keysight.com/go/conformity. You can then search by product number to find the latest Declaration of

Conformity.

Please use ESD Precautions when handling and operating.

*M9601-90100*

This information is subject to change without notice.

M9601-90100

www.keysight.com

4. Install the module.

a. Make sure that the power cord is plugged into a grounded outlet.

b. Make sure that the chassis power switch is Off.

c. If the chassis has multiple fan speed settings, ensure that the fans are set to automatic.

d. Remove the filler panel that covers the slot in which you want to install the module.

e. Remove thread protectors from the top and bottom mounting screws of the module.

f. Hold the module by the injector/ejector handle and slide it into the slot.

g. Latch the module by pulling up on the injector/ejector handle and secure the front panel to the chassis using the

module front-panel mounting screws.

h. Tighten the screws on the module front panel.

i. Install all chassis covers, filler panels, and air scoops after installing the module.

5. Verify operation of the module.

a. Make sure that the chassis and the controller are turned off.

b. If you are using a remote controller (rackmount, desktop, or laptop PC), connect a PXIe cable between the chassis

and the controller.

c. Power up the chassis. Verify that the chassis fans are operating and free of obstructions that may restrict airflow.

d. Power up the controller.

e. Check that the controller automatically recognizes the module in the device manager; e.g. via Start menu >

Windows System Tools > Control Panel > Device Manager. The module should be visible in the device tree.

The controller might request a reboot. Reboot the controller, if requested.

f. Check if the module is also visible in the Keysight Connection Expert; e.g. via Start menu > Keysight Connection

Expert.

Latest Information

To get the latest firmware/software/electronic manuals/support information, go to www.keysight.com. You can then

search them by product number.

Other manuals for M9601A

Table of contents

Other Keysight Measuring Instrument manuals

Keysight

Keysight N9000A User manual

Keysight

Keysight E5063A User manual

Keysight

Keysight N5244AU- H29 Installation and operation manual

Keysight

Keysight PNA-L N5231A Installation and operation manual

Keysight

Keysight N1914A User manual

Keysight

Keysight x series User manual

Keysight

Keysight 85024A Manual

Keysight

Keysight N9923A User manual

Keysight

Keysight 16196A Operation manual

Keysight

Keysight x series User manual

Keysight

Keysight N432A User manual

Keysight

Keysight N774 C Series Operating instructions

Keysight

Keysight V3500A User manual

Keysight

Keysight 537A Quick start guide

Keysight

Keysight N9912A User manual

Keysight

Keysight x-series Service manual

Keysight

Keysight N9030A Installation and operation manual

Keysight

Keysight 16861A User manual

Keysight

Keysight 9020A Installation and operation manual

Keysight

Keysight N4375D User manual

Keysight

Keysight N9030B Installation and operation manual

Keysight

Keysight N6705 User manual

Keysight

Keysight N9030B Installation and operation manual

Keysight

Keysight Truevolt Series Service manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

ADTEK

ADTEK MW-5 operating manual

Acterna

Acterna MS1400 Operation manual